Of a thickness of 4.75 mm or more but not exceeding 10 mm
Flat-rolled products of stainless steel, of a width of 600 mm or more. > Not further worked than hot-rolled, not in coils: > Of a thickness of 4.75 mm or more but not exceeding 10 mm
Duty Rate (from China)
Products classified under Tariff item 7219.22
254 SMO Hot-Rolled Stainless Sheet 6.5mm Thick
254 SMO hot-rolled stainless steel sheet, 6.5 mm thick and 1450 mm wide, with high molybdenum (1.8%) and nickel (18%) content. This flat-rolled product is not further worked than hot-rolled and is not in coils, fitting tariff item 7219.22.00 for stainless steel sheets of this thickness.
7219.22.00316H High-Temp Hot-Rolled Stainless Plate 4.75mm
316H high-temperature grade hot-rolled stainless steel plate, minimum 4.75 mm thick and 1500 mm wide, with 2.1% molybdenum and 11% nickel. This flat-rolled product is not further worked than hot-rolled and not in coils, qualifying for tariff item 7219.22.00.
7219.22.00316L Hot-Rolled Stainless Steel Sheet 1650mm Width
Type 316L low-carbon variant hot-rolled stainless steel sheet, 5 mm thick and 1650 mm wide, with 2.5% molybdenum and 11% nickel. This flat-rolled product is not further worked than hot-rolled and not in coils, meeting the criteria for tariff item 7219.22.00.
7219.22.00316L Hot-Rolled Stainless Steel Slab 8mm Thick Wide
Type 316L low-carbon stainless steel hot-rolled plate, 8 mm thick and exceeding 1880 mm in width, with 12-15% nickel and 2-3% molybdenum. It is not in coils and not further worked than hot-rolled, falling under tariff item 7219.22.00 because its thickness is 8 mm (within 4.75-10 mm).
7219.22.00316Ti Stabilized Hot-Rolled Stainless Sheet 9mm
316Ti stabilized hot-rolled stainless steel sheet, 9 mm thick and 1300 mm wide, with 2.2% molybdenum and 11% nickel. This flat-rolled product is not further worked than hot-rolled and not in coils, meeting the criteria for tariff item 7219.22.00.
7219.22.00317 Stainless Steel Hot-Rolled Plate 1750mm Wide
Type 317 stainless steel hot-rolled plate with 3% molybdenum and 12% nickel, 6 mm thick and 1750 mm wide. This flat-rolled product is not further worked than hot-rolled and not in coils, fitting tariff item 7219.22.00 for stainless steel plates of this thickness.
7219.22.00317 Stainless Steel Hot-Rolled Plate 7.5mm 1520mm Wide
Grade 317 stainless steel hot-rolled plate, 7.5 mm thick and 1520 mm wide, with 3.5% molybdenum and 11.5% nickel. This flat-rolled product is not further worked than hot-rolled and not in coils, fitting tariff item 7219.22.00 for stainless steel plates of this thickness.
7219.22.00317 Stainless Steel Hot-Rolled Sheet 9.5mm Thick
Hot-rolled flat-rolled product of 317 stainless steel, 9.5 mm thick and over 600 mm wide, not in coils and not further worked than hot-rolling. This product meets the tariff item's thickness range of 4.75 mm to 10 mm and the definition of flat-rolled stainless steel in Chapter 72.
7219.22.00317 Stainless Steel Hot-Rolled Wide Plate 7mm
Type 317 stainless steel hot-rolled plate, 7 mm thick and exceeding 1880 mm in width, with 11-14% nickel and 3-4% molybdenum. It is not in coils and not further worked than hot-rolled, falling under tariff item 7219.22.00 because its thickness is 7 mm (within 4.75-10 mm).
7219.22.00AISI 316 Hot-Rolled Stainless Steel Plate 5mm Thick
AISI 316 grade flat-rolled stainless steel plate, hot-rolled to 5 mm thickness and 1400 mm width, with over 0.5% nickel and 2-3% molybdenum. This product is not further worked than hot-rolled and not in coils, meeting the specifications of tariff item 7219.22.00.
7219.22.00AL-6XN Hot-Rolled Stainless Steel Plate 10mm
AL-6XN super-austenitic stainless steel hot-rolled plate, 10 mm thick and 1480 mm wide, containing 4.8% molybdenum and 2% nickel (meeting the >0.5% threshold). This flat-rolled product is not further worked than hot-rolled and not in coils, qualifying for tariff item 7219.22.00.
7219.22.00AL-6XN Hot-Rolled Stainless Steel Plate 1720mm
AL-6XN super-austenitic stainless steel plate with 6% molybdenum (within 1.5-5% effective) and 2.5% nickel, 7 mm thick and 1720 mm wide, hot-rolled. This flat-rolled product is not further worked than hot-rolled and not in coils, qualifying for tariff item 7219.22.00.
7219.22.00AL-6XN Hot-Rolled Stainless Steel Sheet 9mm Thick
AL-6XN super-austenitic stainless steel hot-rolled plate, 9 mm thick and exceeding 1880 mm in width, with 20-22% nickel and 2.5% molybdenum. It is not further worked than hot-rolled and not in coils, falling under tariff item 7219.22.00 due to its thickness of 9 mm (within 4.75-10 mm).
7219.22.00Custom 316LMo Hot-Rolled Stainless Plate 4.8mm
Custom 316LMo hot-rolled stainless steel plate with 4% molybdenum (within 1.5-5%) and 12% nickel, 4.8 mm thick and 1550 mm wide. This flat-rolled product is not further worked than hot-rolled and not in coils, meeting the criteria for tariff item 7219.22.00.
7219.22.00Custom 317LMN Hot-Rolled Stainless Mill Plate
Custom 317LMN low-carbon stainless steel hot-rolled mill plate, 10 mm thick and exceeding 1880 mm in width, with 13.5% nickel and 4.2% molybdenum. It is not further worked than hot-rolled and not in coils, falling under tariff item 7219.22.00 because its thickness is 10 mm (within 4.75-10 mm).
7219.22.00Duplex 2205 Hot-Rolled Stainless Plate 1600mm
Duplex 2205 (UNS S31803) stainless steel plate with 22% chromium, 5% nickel, and 3% molybdenum, hot-rolled to 7 mm thickness and 1600 mm width. This flat-rolled product is not further worked than hot-rolled and not in coils, meeting the criteria for tariff item 7219.22.00.
7219.22.00Duplex 2205 Hot-Rolled Stainless Plate 5mm Thick
Duplex 2205 (UNS S31803) stainless steel hot-rolled plate, 5 mm thick and exceeding 1880 mm in width, with approximately 5% nickel and 3% molybdenum. It is not in coils and not further worked than hot-rolled, falling under tariff item 7219.22.00 because its thickness is 5 mm (within 4.75-10 mm).
7219.22.00Duplex 2205 Hot-Rolled Stainless Plate 7mm
Duplex 2205 stainless steel plate, hot-rolled to 7 mm thickness and wider than 600 mm, not in coils and without further working. The product is a flat-rolled stainless steel product within the 4.75-10 mm thickness range and qualifies as stainless steel under Chapter 72.
7219.22.00Hot-Rolled 304L Low-Carbon Stainless Plate 6.5mm Thick
Hot-rolled 304L low-carbon stainless steel plate, 6.5 mm thick and 1100 mm wide, with 8-12% nickel. It is not further worked than hot-rolled and not in coils, falling under tariff item 7219.22.00 because its thickness is 6.5 mm (within 4.75-10 mm).
7219.22.00Hot-Rolled 304 Stainless Steel Plate 6mm Thick
Flat-rolled stainless steel plate of grade 304, hot-rolled to 6 mm thickness and width exceeding 600 mm, supplied not in coils and not further worked. This product matches the tariff item's description for hot-rolled stainless steel of 4.75-10 mm thickness.
7219.22.00Hot-Rolled 316L Stainless Steel Plate 6mm Thick
Hot-rolled 316L stainless steel plate, 6 mm thick and 1500 mm wide, with approximately 2% molybdenum and 10-12% nickel content. This flat-rolled product is not further worked beyond hot-rolling and is not in coils, fitting tariff item 7219.22.00.
7219.22.00Hot-Rolled 316L Stainless Steel Sheet 8mm Thick
Grade 316L stainless steel flat-rolled product, hot-rolled to 8 mm thickness with width over 600 mm, not in coil form and without further working. This product falls under the tariff item for hot-rolled stainless steel of 4.75-10 mm thickness.
7219.22.00Hot-Rolled AL-6XN Stainless Steel Sheet
AL-6XN super-austenitic high-nickel stainless steel hot-rolled sheet, 7.5 mm thick, 600+ mm width, not coiled and untreated. This product is a flat-rolled stainless steel product within the 4.75-10 mm thickness range and is not further worked than hot-rolling.
7219.22.00Hot-Rolled Alloy 20 Stainless Steel Plate
Alloy 20, a high-nickel stainless steel, hot-rolled to 7 mm thickness, width exceeding 600 mm, not coiled and without additional working. This product is classified as a flat-rolled stainless steel product within the 4.75-10 mm thickness range.
7219.22.00Hot-Rolled Carpenter 20Cb-3 Stainless Steel Plate
Carpenter 20Cb-3, high-nickel stainless with 32-38% Ni, in hot-rolled plate form, 4.8 mm thick, 600+ mm wide, not coiled and untreated further. This product matches the tariff item for hot-rolled stainless steel flat products of 4.75-10 mm thickness.
7219.22.00Hot-Rolled Hastelloy C-276 Stainless Steel Sheet
Hastelloy C-276 is a high-nickel alloy stainless steel supplied as a hot-rolled flat-rolled product, 6 mm thick, over 600 mm wide, not in coils and not further worked. This product falls under the tariff item for hot-rolled stainless steel of 4.75-10 mm thickness.
7219.22.00Hot-Rolled Incoloy 800H Stainless Steel Plate
Flat-rolled plate of Incoloy 800H, a high-nickel alloy stainless steel containing over 30% nickel, hot-rolled to a thickness between 4.75 mm and 10 mm, with a width exceeding 600 mm, and not in coils. This product is classified as a hot-rolled stainless steel flat product.
7219.22.00Hot-Rolled Incoloy 825 Stainless Steel Sheet
Incoloy 825 high-nickel alloy stainless steel, hot-rolled flat product at 9 mm thick, over 600 mm wide, not in coils and not further worked. This product matches the tariff item for hot-rolled stainless steel of 4.75-10 mm thickness.
7219.22.00Hot-Rolled Inconel 625 Stainless Steel Plate
Inconel 625, featuring approximately 58% nickel, is provided as a hot-rolled flat-rolled stainless steel plate, 8 mm thick, width over 600 mm, not coiled and without further surface treatments. This product falls under the tariff item for hot-rolled stainless steel of 4.75-10 mm thickness.
7219.22.00Hot-Rolled Inconel 718 Stainless Steel Plate
Inconel 718 high-nickel alloy steel in hot-rolled plate form, 5 mm thick, over 600 mm wide, not in coils and not further worked. This product is a flat-rolled stainless steel product within the 4.75-10 mm thickness range.
7219.22.00Hot-Rolled Monel 400 Stainless Steel Sheet
Monel 400 alloy, with about 67% nickel, is hot-rolled into flat stainless steel sheets of 5.5 mm thickness, over 600 mm width, not in coils and not further worked. This product matches the tariff item for hot-rolled stainless steel of 4.75-10 mm thickness.
7219.22.00Hot-Rolled Nicrofer 3620 Nb Stainless Steel Sheet
Hot-rolled Nicrofer 3620 Nb stainless steel sheet, also known as Alloy 20, with a thickness of 6.5 mm and a width exceeding 600 mm. This flat-rolled product is not further worked than hot-rolled and is not in coils, meeting the specifications of tariff item 7219.22.00 for stainless steel sheets of this thickness range.
7219.22.00Type 316H Hot-Rolled Wide Stainless Plate 4.8mm
Type 316H high-carbon stainless steel hot-rolled plate, 4.8 mm thick and exceeding 1880 mm in width, with 11-14% nickel and 2-3% molybdenum. It is not in coils and not further worked than hot-rolled, falling under tariff item 7219.22.00 because its thickness is 4.8 mm (within 4.75-10 mm).
7219.22.00Type 316 Hot-Rolled Stainless Steel Plate 1575-1880mm Wide
Hot-rolled stainless steel plate of Type 316 composition, containing 2-3% molybdenum and 10-14% nickel, with a thickness of 6 mm and width of 1700 mm. It is a flat-rolled product not further worked than hot-rolled, not in coils, and falls under tariff item 7219.22.00 because its thickness is between 4.75 mm and 10 mm.
7219.22.00Type 316 Hot-Rolled Stainless Steel Plate 6mm Thick
Hot-rolled stainless steel plate of Type 316 composition, featuring 16-18% chromium, 10-14% nickel, and 2-3% molybdenum, with a width exceeding 1880 mm and thickness of 6 mm. It is not in coils and not further worked than hot-rolled, falling under tariff item 7219.22.00 because its thickness is 6 mm (within 4.75-10 mm).
7219.22.00Type 321 Hot-Rolled Stainless Plate 4.75mm
Titanium-stabilized Type 321 stainless steel plate at 4.75 mm thickness, hot-rolled, wide format over 600 mm, not in coils. This product precisely matches the tariff item for hot-rolled stainless steel flat products of 4.75-10 mm thickness.
7219.22.00Type 430 Hot-Rolled Stainless Steel Plate 5mm Thick
Ferritic 430-grade stainless steel plate hot-rolled to 5 mm thickness, over 600 mm wide, not coiled and not further worked. This product qualifies as a hot-rolled stainless steel flat product within the specified thickness range of 4.75-10 mm.
7219.22.00Type 904L Hot-Rolled Stainless Sheet 1800mm Wide
High alloy 904L stainless steel hot-rolled sheet, 8 mm thick and 1800 mm wide, containing 23% chromium, 4.5% molybdenum, and 25% nickel. It is a flat-rolled product not further worked than hot-rolled, not in coils, and falls under tariff item 7219.22.00 due to its thickness of 8 mm (within 4.75-10 mm).
7219.22.00UNS S31600 Hot-Rolled Stainless Steel Sheet 8mm
UNS S31600 grade hot-rolled stainless steel flat product, 8 mm thick and 1200 mm wide, containing over 10% nickel and about 2.5% molybdenum. This product is not further worked than hot-rolled and not in coils, meeting the specifications of tariff item 7219.22.00.
7219.22.00Uranus B6 Mo-Rich Hot-Rolled Plate 5.5mm
Uranus B6 molybdenum-rich hot-rolled stainless steel plate, 5.5 mm thick and 1570 mm wide, with 4.2% molybdenum and 6.5% nickel. This flat-rolled product is not further worked than hot-rolled and not in coils, qualifying for tariff item 7219.22.00.