Duplex 2205 Hot-Rolled Stainless Plate 1600mm
Duplex 2205 (UNS S31803) stainless steel plate with 22% chromium, 5% nickel, and 3% molybdenum, hot-rolled to 7 mm thickness and 1600 mm width. This flat-rolled product is not further worked than hot-rolled and not in coils, meeting the criteria for tariff item 7219.22.00.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the plate is cold-rolled or pickled after hot-rolling
Further processing would move the product to a different subheading.
If the width is less than 600 mm
Stainless steel flat-rolled products under 600 mm width fall under heading 7220.
If the plate is supplied in coils
Coiled hot-rolled stainless steel is classified separately.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the plate is not further worked beyond hot-rolling and is not in coils to qualify for this tariff item
• Maintain documentation of the alloy composition, including nickel and molybdenum content, for customs inspection
• Confirm the thickness is within 4.75 mm to 10 mm and width exceeds 600 mm
Related Products under Tariff item 7219.22.00
254 SMO Hot-Rolled Stainless Sheet 6.5mm Thick
254 SMO hot-rolled stainless steel sheet, 6.5 mm thick and 1450 mm wide, with high molybdenum (1.8%) and nickel (18%) content. This flat-rolled product is not further worked than hot-rolled and is not in coils, fitting tariff item 7219.22.00 for stainless steel sheets of this thickness.
316H High-Temp Hot-Rolled Stainless Plate 4.75mm
316H high-temperature grade hot-rolled stainless steel plate, minimum 4.75 mm thick and 1500 mm wide, with 2.1% molybdenum and 11% nickel. This flat-rolled product is not further worked than hot-rolled and not in coils, qualifying for tariff item 7219.22.00.
316L Hot-Rolled Stainless Steel Sheet 1650mm Width
Type 316L low-carbon variant hot-rolled stainless steel sheet, 5 mm thick and 1650 mm wide, with 2.5% molybdenum and 11% nickel. This flat-rolled product is not further worked than hot-rolled and not in coils, meeting the criteria for tariff item 7219.22.00.
316L Hot-Rolled Stainless Steel Slab 8mm Thick Wide
Type 316L low-carbon stainless steel hot-rolled plate, 8 mm thick and exceeding 1880 mm in width, with 12-15% nickel and 2-3% molybdenum. It is not in coils and not further worked than hot-rolled, falling under tariff item 7219.22.00 because its thickness is 8 mm (within 4.75-10 mm).
316Ti Stabilized Hot-Rolled Stainless Sheet 9mm
316Ti stabilized hot-rolled stainless steel sheet, 9 mm thick and 1300 mm wide, with 2.2% molybdenum and 11% nickel. This flat-rolled product is not further worked than hot-rolled and not in coils, meeting the criteria for tariff item 7219.22.00.
317 Stainless Steel Hot-Rolled Plate 1750mm Wide
Type 317 stainless steel hot-rolled plate with 3% molybdenum and 12% nickel, 6 mm thick and 1750 mm wide. This flat-rolled product is not further worked than hot-rolled and not in coils, fitting tariff item 7219.22.00 for stainless steel plates of this thickness.