Of a thickness of 4.75 mm or more but not exceeding 10 mm
Live horses, asses, mules and hinnies. > Of a thickness of 4.75 mm or more but not exceeding 10 mm
Duty Rate (from China)
Subheadings
Products classified under Tariff item 7219.22.00
317 Stainless Steel Hot-Rolled Sheet 9.5mm Thick
Hot-rolled flat-rolled products of stainless steel, 9.5 mm thick and over 600 mm wide, not in coils and not further worked. The high-molybdenum 317 grade qualifies as stainless steel under Chapter 72 Note 1(e), and the dimensions fall within the 4.75–10 mm thickness range of this tariff item.
Duplex 2205 Hot-Rolled Stainless Plate 7mm
Duplex 2205 stainless steel plate, hot-rolled to 7 mm thickness and wider than 600 mm, not in coils or further worked. The duplex grade contains chromium ≥10.5% and carbon ≤1.2%, meeting the stainless steel definition, and the dimensions match the 4.75–10 mm thickness range of this tariff item.
Hot-Rolled 304 Stainless Steel Plate 6mm Thick
Flat-rolled stainless steel plate of grade 304, hot-rolled to 6 mm thickness and width exceeding 600 mm, supplied not in coils and not further worked beyond hot-rolling. The 304 grade meets the stainless steel definition with chromium ≥10.5% and carbon ≤1.2%, and the dimensions fall within the 4.75–10 mm thickness range.
Hot-Rolled 316L Stainless Steel Sheet 8mm Thick
Grade 316L stainless steel flat-rolled product, hot-rolled to 8 mm thickness with width over 600 mm, not in coil form and without further working. The 316L grade qualifies as stainless steel under Chapter 72 Note 1(e), and the dimensions match the 4.75–10 mm thickness range of this tariff item.
Hot-Rolled AL-6XN Stainless Steel Sheet
AL-6XN super-austenitic high-nickel stainless steel hot-rolled sheet, 7.5 mm thick, 600+ mm width, not coiled, untreated. The AL-6XN grade contains chromium ≥10.5% and carbon ≤1.2%, qualifying as stainless steel, and the dimensions fall within the 4.75–10 mm thickness range of this tariff item.
Hot-Rolled Alloy 20 Stainless Steel Plate
Alloy 20, a high-nickel stainless steel, hot-rolled to 7 mm thickness, width exceeding 600 mm, not coiled, without additional working. The Alloy 20 grade contains chromium ≥10.5% and carbon ≤1.2%, meeting the stainless steel definition, and the dimensions match the 4.75–10 mm thickness range of this tariff item.
Hot-Rolled Carpenter 20Cb-3 Stainless Steel Plate
Carpenter 20Cb-3, high-nickel stainless with 32-38% Ni, in hot-rolled plate form, 4.8 mm thick, 600+ mm wide, not coiled, untreated further. The 20Cb-3 grade contains chromium ≥10.5% and carbon ≤1.2%, qualifying as stainless steel, and the dimensions fall within the 4.75–10 mm thickness range of this tariff item.
Hot-Rolled Hastelloy C-276 Stainless Steel Sheet
Hastelloy C-276 is a high-nickel alloy stainless steel supplied as hot-rolled flat-rolled product, 6 mm thick, over 600 mm wide, not in coils, and not further worked. The C-276 grade contains chromium ≥10.5% and carbon ≤1.2%, meeting the stainless steel definition, and the dimensions match the 4.75–10 mm thickness range of this tariff item.
Hot-Rolled Incoloy 800H Stainless Steel Plate
Flat-rolled plate of Incoloy 800H, a high-nickel alloy stainless steel containing over 30% nickel, hot-rolled to a thickness between 4.75 mm and 10 mm, with a width exceeding 600 mm, and not in coils. The 800H grade contains chromium ≥10.5% and carbon ≤1.2%, qualifying as stainless steel, and the dimensions fall within the 4.75–10 mm thickness range of this tariff item.
Hot-Rolled Incoloy 825 Stainless Steel Sheet
Incoloy 825 high-nickel alloy stainless steel, hot-rolled flat product at 9 mm thick, over 600 mm wide, not in coils, not further worked. The 825 grade contains chromium ≥10.5% and carbon ≤1.2%, meeting the stainless steel definition, and the dimensions match the 4.75–10 mm thickness range of this tariff item.
Hot-Rolled Inconel 625 Stainless Steel Plate
Inconel 625, featuring approximately 58% nickel, is provided as a hot-rolled flat-rolled stainless steel plate, 8 mm thick, width over 600 mm, not coiled, and without further surface treatments. The 625 grade contains chromium ≥10.5% and carbon ≤1.2%, qualifying as stainless steel, and the dimensions fall within the 4.75–10 mm thickness range of this tariff item.
Hot-Rolled Inconel 718 Stainless Steel Plate
Inconel 718 high-nickel alloy steel in hot-rolled plate, 5 mm thick, over 600 mm wide, not in coils, not further worked. The 718 grade contains chromium ≥10.5% and carbon ≤1.2%, meeting the stainless steel definition, and the dimensions match the 4.75–10 mm thickness range of this tariff item.
Hot-Rolled Monel 400 Stainless Steel Sheet
Monel 400 alloy, with about 67% nickel, is hot-rolled into flat stainless steel sheets of 5.5 mm thickness, over 600 mm width, not in coils, and not further worked. The Monel 400 grade contains chromium ≥10.5% and carbon ≤1.2%, qualifying as stainless steel, and the dimensions fall within the 4.75–10 mm thickness range of this tariff item.
Type 321 Hot-Rolled Stainless Plate 4.75mm
Titanium-stabilized Type 321 stainless steel plate at minimum 4.75 mm thickness, hot-rolled, wide format over 600 mm, not in coils. The Type 321 grade meets the stainless steel definition with chromium ≥10.5% and carbon ≤1.2%, and the dimensions fall within the 4.75–10 mm thickness range of this tariff item.
Type 430 Hot-Rolled Stainless Steel Plate 5mm Thick
Ferritic 430-grade stainless steel plate hot-rolled to 5 mm thickness, over 600 mm wide, not coiled and not further worked. The 430 grade contains chromium ≥10.5% and carbon ≤1.2%, meeting the stainless steel definition, and the dimensions match the 4.75–10 mm thickness range of this tariff item.