Chapter 7219 — Customs Tariff Headings

7219.2Not further worked than hot-rolled, not in coils:

7219.3Not further worked than cold-rolled (cold-reduced):

7219.90.00Other

Calculate exact duty for your shipment Not sure about classification? Ask the Tariff Assistant

Products classified under Tariff item 72.19

17-4 PH Precipitation Hardening Stainless Coil 11mm

A 17-4 PH stainless steel hot-rolled coil for aerospace applications, 11 mm thick, 1000 mm wide, not further worked. It qualifies as a flat-rolled stainless steel product in coils with a thickness exceeding 10 mm.

17-4 PH Precipitation Hardening Stainless Coil 13mm x 1700mm

A 17-4 PH (precipitation hardening) stainless steel hot-rolled coil, 13 mm thick and 1700 mm wide, used in aerospace and high-strength applications. It fits this tariff item as a flat-rolled stainless steel product, hot-rolled, not further worked, with thickness exceeding 10 mm.

17-4 PH Stainless Steel Coil 16mm Hot-Rolled

A precipitation-hardening 17-4 PH stainless steel hot-rolled coil, 16 mm thick and over 600 mm wide, not further worked beyond hot rolling. This product meets the definition of flat-rolled stainless steel in coils of heading 7219, with a thickness exceeding 10 mm.

310 Hot-Rolled Stainless Steel Heavy Coil 20mm Thick

A high-temperature 310 stainless steel hot-rolled coil, 20 mm thick by 1550 mm wide, ideal for furnace parts. It is a flat-rolled stainless steel product in coils, not further worked, with a thickness exceeding 10 mm.

310 Stainless Steel Hot-Rolled Coil 13mm Thick

A heat-resistant 310 stainless steel grade coil, hot-rolled at 13 mm thickness, over 600 mm wide, uncoated and unpolished. It is a flat-rolled stainless steel product in coils, not further worked, with a thickness exceeding 10 mm.

310 Stainless Steel Hot-Rolled Heavy Coil 14mm x 1900mm

A hot-rolled coil of 310 stainless steel, 14 mm thick and 1900 mm wide, not further worked than hot-rolling. It is used in high-temperature furnace and heat exchanger components due to its heat resistance. It falls under tariff item 7219.11.00 as a flat-rolled stainless steel product over 600 mm wide, over 10 mm thick, in coils.

321 Stabilized Stainless Hot Coil 12.5mm x 1750mm Width

A titanium-stabilized 321 stainless steel hot-rolled coil, 12.5 mm thick and 1750 mm wide, not further worked than hot-rolling. It resists carbide precipitation in weld zones, making it suitable for high-temperature service. It is classified under 7219.11.00 as a flat-rolled stainless product over 600 mm wide and over 10 mm thick, in coils.

321 Stainless Steel Hot-Rolled Coil 14mm Thick

A stabilized 321 stainless steel flat coil, hot-rolled to 14 mm thickness, over 600 mm wide, untreated beyond rolling. It qualifies as flat-rolled stainless steel in coils, not further worked, with a thickness exceeding 10 mm.

430 Ferritic Hot-Rolled Stainless Coil 11.5mm x 1850mm

A 430 ferritic stainless steel hot-rolled coil, 11.5 mm thick and 1850 mm wide, not further worked than hot-rolling. It is used in automotive exhaust and decorative applications due to its corrosion resistance and cost-effectiveness. It falls under 7219.11.00 as a flat-rolled stainless product over 600 mm wide and over 10 mm thick, in coils.

430 Stainless Steel Hot-Rolled Coil 11mm Thick

A ferritic 430 grade stainless steel flat-rolled coil, hot-rolled to 11 mm thickness and over 600 mm wide, not subjected to further working. It meets the criteria for hot-rolled stainless steel in coils exceeding 10 mm thickness.

Duplex 2205 Hot-Rolled Stainless Coil 11mm Thick 2000mm Wide

A duplex 2205 (UNS S31803) stainless steel hot-rolled coil, 11 mm thick and 2000 mm wide, not further worked than hot-rolling. It offers high strength and corrosion resistance for offshore structures. It is classified under 7219.11.00 as a flat-rolled stainless product over 600 mm wide and over 10 mm thick, in coils.

Duplex 2205 Hot-Rolled Stainless Steel Coil 13mm

A duplex 2205 stainless steel hot-rolled coil, 13 mm thickness, 1400 mm width, featuring high strength and corrosion resistance. It meets the criteria for flat-rolled stainless steel in coils exceeding 10 mm thickness.

Duplex 2205 Stainless Steel Coil 20mm Thick Hot-Rolled

A high-strength duplex 2205 stainless steel coil, hot-rolled to 20 mm thickness with width over 600 mm, in coil form without additional treatments. It is a flat-rolled stainless steel product in coils, not further worked, with a thickness exceeding 10 mm.

Hot-Rolled 304L Stainless Steel Slab Coil 10.5mm x 1600mm

A low-carbon 304L stainless steel hot-rolled slab coil, 10.5 mm thick and 1600 mm wide, not further worked than hot-rolling. It is intended as feedstock for heavy plate production. It falls under 7219.11.00 as a flat-rolled stainless product over 600 mm wide and over 10 mm thick, in coils.

Hot-Rolled 304 Stainless Steel Coil 12mm Thick

A coil of hot-rolled 304 stainless steel measuring 12 mm thick and 1500 mm wide, not further worked beyond hot-rolling. It falls under this tariff item as a flat-rolled stainless steel product of thickness exceeding 10 mm.

Hot-Rolled 304 Stainless Steel Coil 12mm Thick 1800mm Wide

A hot-rolled coil of 304 austenitic stainless steel, 12 mm thick and 1800 mm wide, not further worked than hot-rolling. It is supplied in coil form without additional surface treatment. It is classified under 7219.11.00 as a flat-rolled stainless product over 600 mm wide and over 10 mm thick, in coils.

Hot-Rolled 304 Stainless Steel Coil 25mm Thick

An extra-thick 304 stainless steel coil hot-rolled to 25 mm, over 600 mm wide, in as-rolled condition without further surface treatments. It directly matches the tariff item for thick hot-rolled stainless coils.

Hot-Rolled 304 Stainless Steel Mill Edge Coil 14mm

A mill edge hot-rolled 304 stainless steel coil, 14 mm thickness, 1300 mm width, with as-rolled edges. It meets all criteria for this tariff item: stainless steel, thickness exceeding 10 mm, in coils, not further worked.

Hot-Rolled 316L Stainless Steel Coil 15mm Thick

An industrial-grade 316L stainless steel coil, hot-rolled to 15 mm thickness with width exceeding 600 mm, supplied in coil form without further processing. It is classified under this tariff item for its stainless steel composition and thickness.

Hot-Rolled 316L Stainless Steel Plate Coil 15mm Thick

A heavy-gauge 316L stainless steel coil, 15 mm thick and 1200 mm wide, hot-rolled only with no further surface working. It is classified under this tariff item due to its thickness exceeding 10 mm, stainless steel composition, and coil form.

Hot-Rolled 316Ti Stabilized Stainless Coil 13.2mm x 1620mm

A 316Ti titanium-stabilized stainless steel hot-rolled coil, 13.2 mm thick and 1620 mm wide, not further worked than hot-rolling. It is used as feedstock for heat exchanger tubing. It falls under 7219.11.00 as a flat-rolled stainless product over 600 mm wide and over 10 mm thick, in coils.

Hot-Rolled Stainless Steel Coil 12mm Thick 304 Grade

A coil of 304 stainless steel, hot-rolled to a thickness of 12 mm and width over 600 mm, not further worked beyond hot-rolling. It falls under this tariff item as flat-rolled stainless steel in coils, exceeding 10 mm thick.

Martensitic 410 Hot-Rolled Coil 10.8mm x 1780mm Wide

A hardenable 410 martensitic stainless steel hot-rolled coil, 10.8 mm thick and 1780 mm wide, not further worked than hot-rolling. It is used for pump shafts and valve components. It is classified under 7219.11.00 as a flat-rolled stainless product over 600 mm wide and over 10 mm thick, in coils.

Type 316L Hot-Rolled Stainless Steel Coil 15mm x 1650mm

A heavy-gauge Type 316L stainless steel hot-rolled coil, 15 mm thick and 1650 mm wide, not further worked than hot-rolling. It is ideal for marine and chemical processing applications. It falls under 7219.11.00 as a flat-rolled stainless product over 600 mm wide and over 10 mm thick, in coils.

17-4 PH Hot-Rolled Stainless Coil 6.5mm Thick

Precipitation-hardening 17-4 PH (630) stainless steel hot-rolled coil, 6.5 mm thick and wide format, supplied without annealing or pickling. Classified under tariff item 7219.12.00 as a flat-rolled stainless steel product, hot-rolled in coils, with thickness within the 4.75 mm to 10 mm range.

321 Austenitic Stainless Steel Hot Coil 9.5mm

Austenitic grade 321 stainless steel flat-rolled coil, hot-rolled to 9.5 mm thickness with width exceeding 600 mm, supplied in coil without additional surface treatments. This product falls under tariff item 7219.12.00 as it is a flat-rolled product of stainless steel, of a width of 600 mm or more, not further worked than hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.

321 Hot-Rolled Stainless Steel Coil 4.8mm Thick

Titanium-stabilized 321 stainless steel hot-rolled coil, 4.8 mm thick, wound in wide coils, not subjected to annealing or pickling. This product is classified under tariff item 7219.12.00 as a flat-rolled stainless steel product, hot-rolled in coils, with a thickness between 4.75 mm and 10 mm.

409 Hot-Rolled Stainless Steel Coil 5.5mm Thick

Ferritic 409 stainless (11Cr) hot-rolled coil 5.5mm thick for automotive mufflers, not annealed/pickled, wide coils. This product falls under tariff item 7219.12.00 as a flat-rolled product of stainless steel, of a width of 600 mm or more, not further worked than hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.

430 Hot-Rolled Stainless Steel Coil 7mm Thick

Ferritic 430 stainless steel hot-rolled in coils, 7mm thickness, wide format without annealing or pickling treatment. Used for automotive exhaust components. This product meets tariff item 7219.12.00 as a flat-rolled product of stainless steel, of a width of 600 mm or more, not further worked than hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.

AL-6XN Hot-Rolled High-Nickel Stainless Coil

AL-6XN super-austenitic stainless steel with high nickel content (~24% Ni), hot-rolled coil 5.5 mm thick and 650 mm wide, intended for desalination plants. Classified under tariff item 7219.12.00 as a flat-rolled stainless steel product, hot-rolled in coils, with thickness between 4.75 mm and 10 mm.

Alloy 20Cb-3 Hot-Rolled High-Nickel Coil

Alloy 20Cb-3 stainless steel coil with high nickel content (~35% Ni), hot-rolled 6 mm thick and 700 mm wide, for sulfuric acid handling applications. This product falls under tariff item 7219.12.00 as a flat-rolled stainless steel product, hot-rolled in coils, with thickness within the 4.75 mm to 10 mm range.

Custom 625 (Inconel 625) Hot-Rolled Coil

Inconel 625 (Alloy 625) high-nickel superalloy steel coil (~58% Ni), hot-rolled 8 mm thick and at least 600 mm wide, for aerospace and nuclear applications. Classified under tariff item 7219.12.00 as a flat-rolled stainless steel product, hot-rolled in coils, with thickness between 4.75 mm and 10 mm.

Duplex 2205 Hot-Rolled Stainless Coil 5mm Thick

Duplex 2205 (UNS S31803) stainless steel hot-rolled coil, 5mm thick, over 600mm wide, supplied not annealed or pickled for offshore platform fabrication. This product applies to tariff item 7219.12.00 as a flat-rolled product of stainless steel, of a width of 600 mm or more, not further worked than hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.

Duplex 2205 Hot-Rolled Stainless Coil 7mm Thick

Duplex 2205 (UNS S31803) stainless steel hot-rolled coil at 7 mm thickness, width 600 mm or more, not subjected to further working treatments. This high-strength corrosion-resistant material is classified under tariff item 7219.12.00 as a flat-rolled stainless steel product, hot-rolled in coils, with a thickness within the specified range.

Hastelloy C-276 Hot-Rolled Stainless Coil

Hastelloy C-276, a nickel-molybdenum-chromium superalloy with approximately 57% nickel, supplied as hot-rolled coil 5-9 mm thick and at least 600 mm wide for severe corrosive environments. This product is classified under tariff item 7219.12.00 as a flat-rolled stainless steel product, hot-rolled in coils, with thickness within the specified range.

Hot-Rolled 17-4 PH Stainless Steel Coil 10mm Thick 1420mm Wide

Hot-rolled coil of precipitation-hardening 17-4 PH stainless steel, 10 mm thick and 1420 mm wide, supplied in coil form without further working. This flat-rolled product falls under tariff item 7219.12.00 as it is stainless steel of a width exceeding 600 mm, hot-rolled in coils, with a thickness between 4.75 mm and 10 mm.

Hot-Rolled 304H Stainless Steel Coil 6.5mm Thick 1490mm Wide

Hot-rolled coil of high-carbon 304H stainless steel, 6.5 mm thick and 1490 mm wide, supplied in coil form without surface treatments. This product is classified under tariff item 7219.12.00 because it is a flat-rolled stainless steel product of a width exceeding 600 mm, hot-rolled in coils, with a thickness within the 4.75 mm to 10 mm range.

Hot-Rolled 304 Stainless Steel Coil 6mm Thick

A flat-rolled stainless steel coil made from grade 304 alloy, hot-rolled to a thickness of 6 mm and width exceeding 600 mm, supplied in coil form without further surface treatments like polishing or coating. This product falls under tariff item 7219.12.00 as a flat-rolled product of stainless steel, of a width of 600 mm or more, not further worked than hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.

Hot-Rolled 304 Stainless Steel Coil 6mm Thick 1500mm Wide

Hot-rolled stainless steel coil made from grade 304 alloy, 6 mm thick and 1500 mm wide, not further worked beyond hot-rolling and supplied in coil form. This product falls under tariff item 7219.12.00 as it is a flat-rolled stainless steel product of a width exceeding 600 mm, hot-rolled in coils, with a thickness between 4.75 mm and 10 mm.

Hot-Rolled 304 Stainless Steel Coil 8mm Thick 1500mm Wide

This is a hot-rolled coil of 304 grade stainless steel measuring 8 mm thick and 1500 mm wide, not further worked beyond hot-rolling. It falls under tariff item 7219.12.00 as a flat-rolled product of stainless steel, of a width of 600 mm or more, not further worked than hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.

Hot-Rolled 304 Stainless Steel Coil 8mm Thick 1600mm Wide

This is a hot-rolled coil of 304 austenitic stainless steel, measuring 8 mm in thickness and 1600 mm in width, not further worked beyond hot-rolling. This product falls under tariff item 7219.12.00 as a flat-rolled product of stainless steel, of a width of 600 mm or more, not further worked than hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.

Hot-Rolled 304 Stainless Steel Heavy Coil 10mm Thick 1570mm Wide

Maximum thickness 304 stainless steel hot-rolled coil at 10 mm x 1570 mm wide for structural applications, not further worked. This product precisely matches tariff item 7219.12.00 as a flat-rolled product of stainless steel, of a width of 600 mm or more, not further worked than hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.

Hot-Rolled 310 Stainless Steel Coil 4.8mm Thick

Hot-rolled stainless steel coil in grade 310, measuring 4.8 mm in thickness and 700 mm in width, supplied in coil form without any further working. This product falls under tariff item 7219.12.00 as a flat-rolled stainless steel product, hot-rolled in coils, with a thickness between 4.75 mm and 10 mm.

Hot-Rolled 310 Stainless Steel Coil 6.9mm Thick 1580mm Wide

High-temperature 310 stainless steel hot-rolled in coils, 6.9 mm thick and 1580 mm wide, not further worked. Classified under tariff item 7219.12.00 as a flat-rolled stainless steel product, hot-rolled in coils, with thickness between 4.75 mm and 10 mm and width exceeding 600 mm.

Hot-Rolled 310 Stainless Steel Coil 9.5mm Thick

High-temperature 310 stainless steel (25Cr-20Ni) hot-rolled into 9.5mm thick coils, over 600mm wide, delivered not annealed or pickled. Used in furnace parts. This product precisely matches tariff item 7219.12.00 as a flat-rolled product of stainless steel, of a width of 600 mm or more, not further worked than hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.

Hot-Rolled 310 Stainless Steel Coil 9.5mm Thick 1480mm Wide

Hot-rolled coil of high-temperature 310 stainless steel, 9.5 mm thick and 1480 mm wide, supplied in coil form without further treatments. This product is classified under tariff item 7219.12.00 because it is a flat-rolled stainless steel product of a width exceeding 600 mm, hot-rolled in coils, with a thickness within the 4.75 mm to 10 mm range.

Hot-Rolled 310 Stainless Steel Coil 9mm Thick 1550mm Wide

High-temperature resistant 310 grade stainless steel hot-rolled into coils of 9 mm thickness and 1550 mm width, not further worked. This product meets tariff item 7219.12.00 criteria as a flat-rolled product of stainless steel, of a width of 600 mm or more, not further worked than hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.

Hot-Rolled 316L Stainless Steel Coil 7.5mm Thick 1520mm Wide

A 316L stainless steel hot-rolled coil, 7.5 mm thick and 1520 mm wide, supplied in coil form without further working. This product is classified under tariff item 7219.12.00 as a flat-rolled product of stainless steel, of a width of 600 mm or more, not further worked than hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.

Hot-Rolled 316L Stainless Steel Coil 7.5mm Thick 1650mm Wide

Hot-rolled 316L low-carbon stainless steel coil, 7.5 mm thick and 1650 mm wide, supplied in coil form without further processing. This product falls under tariff item 7219.12.00 as a flat-rolled stainless steel product, hot-rolled in coils, with thickness within the 4.75 mm to 10 mm range.

Hot-Rolled 316L Stainless Steel Coil 8mm Thick

Grade 316L stainless steel flat-rolled product, hot-rolled to 8 mm thickness with width over 600 mm, wound into coils directly after rolling without additional processing. This product is classified under tariff item 7219.12.00 as a flat-rolled product of stainless steel, of a width of 600 mm or more, not further worked than hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.

Hot-Rolled 316L Stainless Steel Coil 8mm Thick 1520mm Wide

Grade 316L hot-rolled stainless steel coil, 8 mm thick and 1520 mm wide, in coil form without further working such as polishing or coating. This product falls under tariff item 7219.12.00 as it is a flat-rolled stainless steel product of a width exceeding 600 mm, hot-rolled in coils, with a thickness between 4.75 mm and 10 mm.

Hot-Rolled 316Ti Stainless Steel Coil 5.5mm Thick 1510mm Wide

Stabilized 316Ti stainless steel hot-rolled into 5.5 mm thick, 1510 mm wide coils, not further processed. This product is classified under tariff item 7219.12.00 because it is a flat-rolled stainless steel product of a width exceeding 600 mm, hot-rolled in coils, with a thickness within the 4.75 mm to 10 mm range.

Hot-Rolled 321 Stainless Steel Coil 4.8mm Thick 1530mm Wide

Titanium-stabilized 321 stainless steel coil hot-rolled to 4.8 mm thickness and 1530 mm width, uncoated and unpolished in coil. This product falls under tariff item 7219.12.00 as it is a flat-rolled stainless steel product of a width exceeding 600 mm, hot-rolled in coils, with a thickness between 4.75 mm and 10 mm.

Hot-Rolled 409 Stainless Steel Coil 10mm Thick 1800mm Wide

Ferritic 409 stainless steel hot-rolled coil at maximum 10 mm thickness and 1800 mm width for heavy plate applications, not further worked. Classified under tariff item 7219.12.00 as a flat-rolled stainless steel product, hot-rolled in coils, with thickness between 4.75 mm and 10 mm.

Hot-Rolled 409 Stainless Steel Coil 9mm Thick 1450mm Wide

Ferritic 409 automotive-grade stainless coil hot-rolled to 9 mm by 1450 mm, supplied coiled without further working. This product is classified under tariff item 7219.12.00 because it is a flat-rolled stainless steel product of a width exceeding 600 mm, hot-rolled in coils, with a thickness within the 4.75 mm to 10 mm range.

Hot-Rolled 430 Stainless Steel Coil 7mm Thick 1550mm Wide

Ferritic 430 grade stainless steel coil, hot-rolled to 7 mm thickness and 1550 mm width, not subjected to further working. This product falls under tariff item 7219.12.00 as it is a flat-rolled stainless steel product of a width exceeding 600 mm, hot-rolled in coils, with a thickness between 4.75 mm and 10 mm.

Hot-Rolled Duplex 2205 Stainless Coil 7mm Thick 1480mm Wide

Duplex 2205 (S31803) stainless steel hot-rolled coil at 7 mm thickness and 1480 mm width, not further worked beyond rolling. This product fits tariff item 7219.12.00 as a flat-rolled product of stainless steel, of a width of 600 mm or more, not further worked than hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.

Hot-Rolled Duplex 2205 Stainless Steel Coil 5mm Thick 1400mm Wide

Duplex 2205 stainless steel hot-rolled coil measuring 5 mm thick by 1400 mm wide, supplied in coiled form without additional processing. This product is classified under tariff item 7219.12.00 because it is a flat-rolled stainless steel product of a width exceeding 600 mm, hot-rolled in coils, with a thickness within the 4.75 mm to 10 mm range.

Hot-Rolled Duplex 2205 Stainless Steel Coil 9mm Thick 1700mm Wide

Duplex 2205 (UNS S31803) stainless steel hot-rolled coil at 9 mm thickness and 1700 mm width, not further worked. This product is classified under tariff item 7219.12.00 as a flat-rolled stainless steel product, hot-rolled in coils, with thickness between 4.75 mm and 10 mm.