Hot-Rolled 316L Stainless Steel Coil 7.5mm Thick 1520mm Wide
A 316L stainless steel hot-rolled coil, 7.5 mm thick and 1520 mm wide, supplied in coil form without further working. This product is classified under tariff item 7219.12.00 for stainless flat-rolled products ≥600 mm wide, 4.75-10 mm thick.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the thickness exceeds 10 mm
Thicker flat-rolled stainless steel products fall under a different tariff item.
If the thickness is less than 3 mm
Thinner flat-rolled stainless steel products are classified under a different tariff item.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the coil is not further worked beyond hot-rolling, as additional processing may change classification
• Verify the thickness and width measurements are accurately documented on the commercial invoice
• Consult the CBSA tariff classification advice service for binding rulings if uncertain
Related Products under Tariff item 7219.12.00
17-4 PH Hot-Rolled Stainless Coil 6.5mm Thick
Precipitation-hardening 17-4 PH (630) stainless steel hot-rolled coil, 6.5 mm thick, wide format without annealing or pickling. This aerospace-grade material falls under tariff item 7219.12.00 due to its stainless steel composition and hot-rolled coil specifications within the 4.75-10 mm thickness range.
321 Austenitic Stainless Steel Hot Coil 9.5mm
Austenitic 321 stainless steel flat-rolled coil, hot-rolled to 9.5 mm thickness with width exceeding 600 mm, supplied in coil form without additional surface treatments. This product meets the definition of flat-rolled products of stainless steel under heading 72.19, specifically within the thickness range of 4.75 mm to 10 mm.
409 Hot-Rolled Stainless Steel Coil 5.5mm Thick
Ferritic 409 stainless (11Cr) hot-rolled coil 5.5 mm thick for automotive mufflers, not annealed or pickled, supplied in wide coils. This product is classified under tariff item 7219.12.00 as stainless steel flat-rolled product within the specified thickness range.
430 Hot-Rolled Stainless Steel Coil 7mm Thick
Ferritic 430 stainless steel hot-rolled in coils, 7 mm thickness, wide format without annealing or pickling treatment. Used for automotive exhaust components, this product meets tariff item 7219.12.00 as not further worked hot-rolled stainless steel flat-rolled product within the specified thickness range.
Duplex 2205 Hot-Rolled Stainless Coil 5mm Thick
Duplex 2205 (UNS S31803) stainless steel hot-rolled coil, 5 mm thick, over 600 mm wide, supplied not annealed or pickled for offshore platform fabrication. This product falls under tariff item 7219.12.00 as stainless steel flat-rolled product within the specified thickness range.
Duplex 2205 Hot-Rolled Stainless Coil 7mm Thick
Duplex 2205 (UNS S31803) stainless steel hot-rolled coil at 7 mm thickness, width 600 mm or more, not subjected to further working treatments. This high-strength corrosion-resistant material is classified under tariff item 7219.12.00 as flat-rolled stainless steel within the specified thickness range.