Hot-Rolled 17-4 PH Stainless Steel Coil 10mm Thick 1420mm Wide
Hot-rolled coil of precipitation-hardening 17-4 PH stainless steel, 10 mm thick and 1420 mm wide, supplied in coil form without further working. This flat-rolled product falls under tariff item 7219.12.00 as it is stainless steel of a width exceeding 600 mm, hot-rolled in coils, with a thickness between 4.75 mm and 10 mm.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the coil thickness exceeds 10 mm
Tariff item 7219.11.00 covers hot-rolled stainless steel coils of a thickness exceeding 10 mm.
If the coil is not further worked than hot-rolled but presented in straight lengths rather than coils
Flat-rolled stainless steel not in coils falls under heading 7219.21 and subsequent items.
If the width is less than 600 mm
Narrower flat-rolled stainless steel products are classified under heading 7220.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the coil's thickness and width are accurately documented on the commercial invoice, as CBSA may verify dimensions
• Verify the stainless steel grade (17-4 PH) meets the definition of stainless steel under Chapter 72 Note 1(e) — at least 10.5% chromium by weight
• Consider obtaining a Canadian Country of Origin Certificate if the steel originates from a free trade agreement partner to claim preferential duty treatment
Related Products under Tariff item 7219.12.00
17-4 PH Hot-Rolled Stainless Coil 6.5mm Thick
Precipitation-hardening 17-4 PH (630) stainless steel hot-rolled coil, 6.5 mm thick and wide format, supplied without annealing or pickling. Classified under tariff item 7219.12.00 as a flat-rolled stainless steel product, hot-rolled in coils, with thickness within the 4.75 mm to 10 mm range.
321 Austenitic Stainless Steel Hot Coil 9.5mm
Austenitic grade 321 stainless steel flat-rolled coil, hot-rolled to 9.5 mm thickness with width exceeding 600 mm, supplied in coil without additional surface treatments. This product falls under tariff item 7219.12.00 as it is a flat-rolled product of stainless steel, of a width of 600 mm or more, not further worked than hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
321 Hot-Rolled Stainless Steel Coil 4.8mm Thick
Titanium-stabilized 321 stainless steel hot-rolled coil, 4.8 mm thick, wound in wide coils, not subjected to annealing or pickling. This product is classified under tariff item 7219.12.00 as a flat-rolled stainless steel product, hot-rolled in coils, with a thickness between 4.75 mm and 10 mm.
409 Hot-Rolled Stainless Steel Coil 5.5mm Thick
Ferritic 409 stainless (11Cr) hot-rolled coil 5.5mm thick for automotive mufflers, not annealed/pickled, wide coils. This product falls under tariff item 7219.12.00 as a flat-rolled product of stainless steel, of a width of 600 mm or more, not further worked than hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
430 Hot-Rolled Stainless Steel Coil 7mm Thick
Ferritic 430 stainless steel hot-rolled in coils, 7mm thickness, wide format without annealing or pickling treatment. Used for automotive exhaust components. This product meets tariff item 7219.12.00 as a flat-rolled product of stainless steel, of a width of 600 mm or more, not further worked than hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
AL-6XN Hot-Rolled High-Nickel Stainless Coil
AL-6XN super-austenitic stainless steel with high nickel content (~24% Ni), hot-rolled coil 5.5 mm thick and 650 mm wide, intended for desalination plants. Classified under tariff item 7219.12.00 as a flat-rolled stainless steel product, hot-rolled in coils, with thickness between 4.75 mm and 10 mm.