Hot-Rolled Stainless Steel Coil 12mm Thick 304 Grade
A coil of 304 stainless steel, hot-rolled to a thickness of 12 mm and width over 600 mm, not further worked beyond hot-rolling. The 304 grade meets the stainless steel definition, and the thickness exceeding 10 mm qualifies it for tariff item 7219.11.00.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the thickness is between 4.75 mm and 10 mm
Thinner hot-rolled stainless coils are classified under a different item.
If the coil is pickled, annealed, or otherwise worked after hot-rolling
Additional processing changes the tariff classification.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Provide a mill certificate confirming the 304 grade and stainless steel composition
• Ensure the coil is in as-rolled condition with no additional processing
• Verify the width exceeds 600 mm to meet flat-rolled product criteria
Related Products under Tariff item 7219.11.00
17-4 PH Precipitation Hardening Stainless Coil 11mm
A 17-4 PH stainless steel hot-rolled coil for aerospace applications, 11 mm thick and 1000 mm wide, not further worked. The precipitation-hardening grade meets the stainless steel definition, and the thickness exceeding 10 mm places it under tariff item 7219.11.00.
17-4 PH Precipitation Hardening Stainless Coil 13mm x 1700mm
A 17-4 PH precipitation-hardening stainless steel hot-rolled coil, 13 mm thick and 1700 mm wide, used in aerospace and high-strength applications. The grade meets the stainless steel definition, and the thickness exceeding 10 mm qualifies it for tariff item 7219.11.00.
17-4 PH Stainless Steel Coil 16mm Hot-Rolled
A precipitation-hardening stainless steel coil, hot-rolled to a thickness of 16 mm and a width exceeding 600 mm, supplied in coil form without further working. Its composition (17-4 PH) qualifies as stainless steel under Chapter 72 Note 1(e), and its thickness exceeds 10 mm, placing it under tariff item 7219.11.00.
310 Hot-Rolled Stainless Steel Heavy Coil 20mm Thick
A high-temperature 310 stainless steel hot-rolled coil, 20 mm thick by 1550 mm wide, ideal for furnace parts. The 310 grade meets the stainless steel definition, and the thickness exceeding 10 mm qualifies it for tariff item 7219.11.00.
310 Stainless Steel Hot-Rolled Coil 13mm Thick
A heat-resistant 310 stainless steel coil, hot-rolled to 13 mm thickness and over 600 mm wide, uncoated and unpolished. The high chromium and nickel content meets the stainless steel definition, and the thickness over 10 mm qualifies it for tariff item 7219.11.00.
321 Stainless Steel Hot-Rolled Coil 14mm Thick
A stabilized 321 stainless steel flat coil, hot-rolled to 14 mm thickness and over 600 mm wide, with no treatment beyond rolling. The titanium stabilization and chromium content classify it as stainless steel, and the thickness over 10 mm places it under tariff item 7219.11.00.