Duplex 2205 Hot-Rolled Stainless Coil 5mm Thick
Duplex 2205 (UNS S31803) stainless steel hot-rolled coil, 5mm thick, over 600mm wide, supplied not annealed or pickled for offshore platform fabrication. This product applies to tariff item 7219.12.00 as a flat-rolled product of stainless steel, of a width of 600 mm or more, not further worked than hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the thickness exceeds 10 mm
Hot-rolled stainless steel coils over 10 mm thick fall under a different tariff item.
If the thickness is less than 3 mm
Thinner hot-rolled stainless steel coils are classified under a separate item.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the duplex stainless steel meets the Chapter 72 stainless steel definition (chromium ≥10.5%)
• Provide mill test certificates showing chemical composition and mechanical properties to CBSA if requested
• Ensure the product is in coil form and not further worked beyond hot-rolling
Related Products under Tariff item 7219.12.00
17-4 PH Hot-Rolled Stainless Coil 6.5mm Thick
Precipitation-hardening 17-4 PH (630) stainless steel hot-rolled coil, 6.5 mm thick and wide format, supplied without annealing or pickling. Classified under tariff item 7219.12.00 as a flat-rolled stainless steel product, hot-rolled in coils, with thickness within the 4.75 mm to 10 mm range.
321 Austenitic Stainless Steel Hot Coil 9.5mm
Austenitic grade 321 stainless steel flat-rolled coil, hot-rolled to 9.5 mm thickness with width exceeding 600 mm, supplied in coil without additional surface treatments. This product falls under tariff item 7219.12.00 as it is a flat-rolled product of stainless steel, of a width of 600 mm or more, not further worked than hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
321 Hot-Rolled Stainless Steel Coil 4.8mm Thick
Titanium-stabilized 321 stainless steel hot-rolled coil, 4.8 mm thick, wound in wide coils, not subjected to annealing or pickling. This product is classified under tariff item 7219.12.00 as a flat-rolled stainless steel product, hot-rolled in coils, with a thickness between 4.75 mm and 10 mm.
409 Hot-Rolled Stainless Steel Coil 5.5mm Thick
Ferritic 409 stainless (11Cr) hot-rolled coil 5.5mm thick for automotive mufflers, not annealed/pickled, wide coils. This product falls under tariff item 7219.12.00 as a flat-rolled product of stainless steel, of a width of 600 mm or more, not further worked than hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
430 Hot-Rolled Stainless Steel Coil 7mm Thick
Ferritic 430 stainless steel hot-rolled in coils, 7mm thickness, wide format without annealing or pickling treatment. Used for automotive exhaust components. This product meets tariff item 7219.12.00 as a flat-rolled product of stainless steel, of a width of 600 mm or more, not further worked than hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
AL-6XN Hot-Rolled High-Nickel Stainless Coil
AL-6XN super-austenitic stainless steel with high nickel content (~24% Ni), hot-rolled coil 5.5 mm thick and 650 mm wide, intended for desalination plants. Classified under tariff item 7219.12.00 as a flat-rolled stainless steel product, hot-rolled in coils, with thickness between 4.75 mm and 10 mm.