Hastelloy C-276 Hot-Rolled Stainless Coil
Hastelloy C-276, a nickel-molybdenum-chromium superalloy with approximately 57% nickel, supplied as hot-rolled coil 5-9 mm thick and at least 600 mm wide for severe corrosive environments. This product is classified under tariff item 7219.12.00 as a flat-rolled stainless steel product, hot-rolled in coils, with thickness within the specified range.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If not in coil form
Hot-rolled stainless steel not in coils falls under a different subheading.
If in bar or rod form
Bars and rods of high-nickel stainless steel are classified under heading 7222.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the chromium content meets the 10.5% threshold for stainless steel classification
• Provide detailed documentation on the alloy composition to avoid misclassification
• Check if the product requires any special import permits due to its use in corrosive environments
Related Products under Tariff item 7219.12.00
17-4 PH Hot-Rolled Stainless Coil 6.5mm Thick
Precipitation-hardening 17-4 PH (630) stainless steel hot-rolled coil, 6.5 mm thick and wide format, supplied without annealing or pickling. Classified under tariff item 7219.12.00 as a flat-rolled stainless steel product, hot-rolled in coils, with thickness within the 4.75 mm to 10 mm range.
321 Austenitic Stainless Steel Hot Coil 9.5mm
Austenitic grade 321 stainless steel flat-rolled coil, hot-rolled to 9.5 mm thickness with width exceeding 600 mm, supplied in coil without additional surface treatments. This product falls under tariff item 7219.12.00 as it is a flat-rolled product of stainless steel, of a width of 600 mm or more, not further worked than hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
321 Hot-Rolled Stainless Steel Coil 4.8mm Thick
Titanium-stabilized 321 stainless steel hot-rolled coil, 4.8 mm thick, wound in wide coils, not subjected to annealing or pickling. This product is classified under tariff item 7219.12.00 as a flat-rolled stainless steel product, hot-rolled in coils, with a thickness between 4.75 mm and 10 mm.
409 Hot-Rolled Stainless Steel Coil 5.5mm Thick
Ferritic 409 stainless (11Cr) hot-rolled coil 5.5mm thick for automotive mufflers, not annealed/pickled, wide coils. This product falls under tariff item 7219.12.00 as a flat-rolled product of stainless steel, of a width of 600 mm or more, not further worked than hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
430 Hot-Rolled Stainless Steel Coil 7mm Thick
Ferritic 430 stainless steel hot-rolled in coils, 7mm thickness, wide format without annealing or pickling treatment. Used for automotive exhaust components. This product meets tariff item 7219.12.00 as a flat-rolled product of stainless steel, of a width of 600 mm or more, not further worked than hot-rolled, in coils, with a thickness of 4.75 mm or more but not exceeding 10 mm.
AL-6XN Hot-Rolled High-Nickel Stainless Coil
AL-6XN super-austenitic stainless steel with high nickel content (~24% Ni), hot-rolled coil 5.5 mm thick and 650 mm wide, intended for desalination plants. Classified under tariff item 7219.12.00 as a flat-rolled stainless steel product, hot-rolled in coils, with thickness between 4.75 mm and 10 mm.