Bars and rods, not further worked than cold-formed or cold-finished
Other bars and rods of stainless steel; angles, shapes and sections of stainless steel. > Bars and rods, not further worked than cold-formed or cold-finished
Duty Rate (from China)
Subheadings
Products classified under Tariff item 7222.20.00
17-4 PH Stainless Steel Cold-Finished Bar 11mm
17-4 PH stainless steel is a precipitation-hardening alloy with less than 8% nickel, cold-finished into an 11 mm round bar for aerospace fasteners. It is classified under tariff item 7222.20.00 as a cold-finished stainless steel bar or rod, specifically for small-diameter products under 18 mm. The material offers superior strength and corrosion resistance after heat treatment.
301 Full Hard Cold-Rolled Bar 10.5mm
301 full hard stainless steel is cold-rolled into a 10.5 mm diameter bar with less than 8% nickel, designed for spring applications. It is classified under tariff item 7222.20.00 as a cold-finished stainless steel bar or rod, specifically for small-diameter products. The full hard condition provides high tensile strength and wear resistance.
316L Stainless Steel Cold-Drawn Rod 12mm Diameter
316L stainless steel is cold-drawn into a 12 mm diameter rod with less than 8% nickel, suitable for marine environments. It is classified under tariff item 7222.20.00 as a cold-finished stainless steel bar or rod, specifically for small-diameter products. The low carbon content enhances weldability and corrosion resistance.
420 Stainless Cold-Finished Dowel Rod 14mm
420 martensitic stainless steel is cold-finished into a 14 mm dowel rod with less than 8% nickel, used for hardened pins. It is classified under tariff item 7222.20.00 as a cold-finished stainless steel bar or rod, specifically for small-diameter products. The material provides corrosion resistance when hardened and tempered.
439LF Stainless Steel Cold Rod 17mm Diameter
439LF stainless steel is a low-ferrite grade cold-formed into a 17 mm round rod with less than 8% nickel, designed for exhaust manifolds. It is classified under tariff item 7222.20.00 as a cold-finished stainless steel bar or rod, specifically for small-diameter products. The material offers optimized weldability and corrosion resistance.
443 Stainless Cold Bar 12.8mm Circular
443 stainless steel is cold-formed into a 12.8 mm circular bar with less than 8% nickel, used for automotive trim. It is classified under tariff item 7222.20.00 as a cold-finished stainless steel bar or rod, specifically for small-diameter products. The ESR-refined material offers improved corrosion resistance and surface quality.
Alloy 20 Cold-Finished Angle Bar
L-shaped angle bar of Alloy 20 high-nickel stainless steel (35% nickel), cold-finished for pharmaceutical equipment frames. Classified under tariff item 7222.20.00 as a high-nickel alloy steel bar cold-formed only. The angle shape meets the definition of bars and rods in Chapter 72.
Cold-Drawn 304L Stainless Steel Bright Round Bar
Cold-drawn 304L stainless steel bright round bar, a low-carbon variant of 304 stainless steel, processed by cold drawing to achieve a smooth bright finish and precise dimensions. This product is not further worked beyond cold-forming, making it classifiable under tariff item 7222.20.00 as a bar of stainless steel.
Cold-Drawn 304 Stainless Hex Rod
Cold-drawn 304 stainless steel hexagonal rod, produced by cold drawing to achieve a hexagonal cross-section with tight tolerances. This rod is not further worked beyond cold-forming, qualifying for tariff item 7222.20.00 as a stainless steel bar or rod.
Cold-Drawn 304 Stainless Steel Threaded Rod
Cold-drawn 304 stainless steel threaded rod, a stainless steel rod that has been cold-drawn and then threaded for use in construction fasteners. The threading is considered part of the cold-forming process, so the rod is not further worked beyond cold-forming, fitting tariff item 7222.20.00.
Cold-Drawn 304 Stainless Tie Bar 16.9mm
304 stainless steel is cold-drawn into a 16.9 mm tie bar with less than 8% nickel, used for concrete forms. It is classified under tariff item 7222.20.00 as a cold-finished stainless steel bar or rod, specifically for small-diameter products. The material offers general corrosion resistance and good formability.
Cold-Drawn 316L Stainless Steel Flat Bar
Cold-drawn 316L stainless steel flat bar, processed by cold drawing to achieve tight tolerances and enhanced mechanical strength for marine and chemical environments. This flat bar is not further worked beyond cold-forming, making it classifiable under tariff item 7222.20.00.
Cold-Drawn Duplex 2205 Stainless Steel Round Rod
Cold-drawn duplex 2205 stainless steel round rod, a high-strength stainless steel rod processed by cold drawing for use in oil and gas piping supports. This rod is not further worked beyond cold-forming, qualifying for tariff item 7222.20.00 as a stainless steel rod.
Cold-Finished 17-4 PH Stainless Steel Hexagonal Rod
Cold-finished 17-4 PH stainless steel hexagonal rod, a precipitation-hardening stainless steel rod processed by cold-finishing for high-strength aerospace applications. This rod is not further worked beyond cold-finishing, fitting tariff item 7222.20.00.
Cold-Finished 304 Stainless Steel Round Bar
Cold-finished 304 stainless steel round bar, produced by cold-forming or cold-finishing processes to achieve a smooth surface and precise dimensions. This round bar is not further worked beyond cold-finishing, making it classifiable under tariff item 7222.20.00.
Cold-Finished 304 Stainless Steel Round Bar 10mm
304 stainless steel is cold-finished into a 10 mm round bar with less than 8% nickel, not further worked beyond cold-forming. It is classified under tariff item 7222.20.00 as a cold-finished stainless steel bar or rod, specifically for small-diameter products under 18 mm. The material provides good corrosion resistance and mechanical properties.
Cold-Finished 310 Stainless Flat Bar
Cold-finished 310 stainless flat bar, a high-temperature stainless steel flat bar processed by cold-finishing for use in furnace parts. This flat bar is not further worked beyond cold-finishing, qualifying for tariff item 7222.20.00.
Cold-Finished 316 Stainless Steel Hollow Bar
Cold-finished 316 stainless steel hollow bar, a hollow drill bar cold-finished for mining tools, with a central hole produced during the cold-forming process. This hollow bar is not further worked beyond cold-finishing, fitting tariff item 7222.20.00 as a stainless steel bar.
Cold-Finished 410 Stainless Steel Bright Bar
Cold-finished 410 stainless steel bright bar, a martensitic stainless steel bar processed by cold-finishing for shafts and pump components. This bright bar is not further worked beyond cold-finishing, making it classifiable under tariff item 7222.20.00.
Cold-Finished Nitronic 60 Stainless Rod
Cold-finished Nitronic 60 stainless rod, a high-strength stainless steel rod processed by cold-finishing for wear-resistant valves. This rod is not further worked beyond cold-finishing, qualifying for tariff item 7222.20.00.
Cold-Formed 304 Stainless Steel Square Bar
Cold-formed 304 stainless steel square bar, a square cross-section stainless steel bar processed by cold-forming for architectural and furniture framing. This square bar is not further worked beyond cold-forming, fitting tariff item 7222.20.00.
Cold-Formed 316Ti Stainless Square Rod
Cold-formed 316Ti stainless square rod, a titanium-stabilized stainless steel rod processed by cold-forming for heat exchangers. This square rod is not further worked beyond cold-forming, making it classifiable under tariff item 7222.20.00.
Cold-Formed 321 Stainless Steel Angle Bar
Cold-formed 321 stainless steel angle bar, a stabilized stainless steel L-shaped angle bar processed by cold-forming for exhaust systems. This angle bar is not further worked beyond cold-forming, fitting tariff item 7222.20.00.
Cold-Formed 430 Stainless Steel Flat Rod
Cold-formed 430 stainless steel flat rod, a ferritic stainless steel rod processed by cold-forming for automotive trim. This flat rod is not further worked beyond cold-forming, making it classifiable under tariff item 7222.20.00.
Electroslag Remelted 15-5 PH Stainless Steel Rod
Electroslag remelted 15-5 PH stainless steel rod, cold-formed only, for aerospace landing gear applications. The electroslag remelting process enhances purity and uniformity, providing high strength-to-weight ratio. Classified under tariff item 7222.20.00 as a stainless steel bar or rod not further worked than cold-formed or cold-finished.
Electroslag Remelted 304 Stainless Steel Hexagonal Rod
High-purity 304 stainless steel hexagonal rod produced by electroslag remelting and cold-finished for precision dimensions. The hexagonal cross-section and cold-finished state qualify it as a bar under tariff item 7222.20.00. Not further worked beyond cold-forming, it maintains the required uniform solid cross-section.
Electroslag Remelted 316 Stainless Steel Round Bar
316 stainless steel round bar produced via electroslag remelting, featuring enhanced purity and uniformity for critical applications. Cold-finished and not further worked, it qualifies under tariff item 7222.20.00 as a stainless steel bar. The round cross-section and uniform dimensions meet the definition of bars and rods.
Electroslag Remelted Custom 465 Stainless Bar
Custom 465 martensitic stainless bar electroslag remelted for landing gear and driveshafts, offering premium cleanliness and high tensile strength over 260 ksi. Cold-finished and not further worked, it falls under tariff item 7222.20.00. The bar's composition meets the stainless steel definition with at least 10.5% chromium.
Electroslag Remelted Nitronic 60 Stainless Round Rod
Nitronic 60 high-manganese stainless round rod electroslag remelted for galling-resistant fasteners. Cold-formed per tariff item 7222.20.00 requirements, with no further working. The rod excels in severe wear environments due to its high manganese content.
Hastelloy C-276 Cold-Finished Flat Bar
Flat bar from Hastelloy C-276 (high-nickel ~57%, molybdenum alloy steel) cold-finished for chemical reactors and flue gas desulfurization. Classified under tariff item 7222.20.00 as a high-nickel stainless bar cold-formed only. The flat cross-section meets the bar definition in Chapter 72.
Hastelloy X Cold-Finished Round Bar
Cold-finished round bar of Hastelloy X (47% nickel superalloy steel) for gas turbine components. Classified under tariff item 7222.20.00 as a high-nickel stainless steel bar not further worked beyond cold-forming. Offers high-temperature strength up to 2200°F.
Incoloy 800 Cold-Finished Round Bar
A high-nickel alloy steel bar (Incoloy 800 with over 30% nickel) cold-finished to precise dimensions for corrosion resistance in high-temperature environments. Classified under tariff item 7222.20.00 as a bar not further worked beyond cold-forming. The round cross-section meets the bar definition.
Incoloy 825 Cold-Formed Shaft Rod
Precision cold-formed rod of Incoloy 825 (42% nickel high-nickel alloy steel) for oil & gas downhole shafts. Classified under tariff item 7222.20.00 as a stainless bar cold-finished, high-nickel per notes. Handles sour gas corrosion environments effectively.
Inconel 625 Cold-Formed Hexagonal Rod
Hexagonal rod of Inconel 625 high-nickel alloy steel (58% nickel minimum), cold-formed for aerospace fasteners and marine hardware. Fits tariff item 7222.20.00 as a stainless steel bar cold-finished, high-nickel alloy. The hexagonal cross-section meets the bar definition in Chapter 72.
Inconel 718 Cold-Formed Bar Stock
Inconel 718 is a precipitation-hardening high-nickel alloy steel containing 52% nickel, cold-formed into bar stock for aircraft engine bolts. It is classified under tariff item 7222.20.00 as a cold-finished stainless steel bar or rod, specifically as a high-nickel alloy product. The material is age-hardenable, providing high strength and corrosion resistance for demanding aerospace applications.
Monel 400 Cold-Formed Square Rod
Monel 400 is a high-nickel copper alloy steel containing 67% nickel, cold-formed into square rods for valve stems and pump shafts in seawater applications. It is classified under tariff item 7222.20.00 as a cold-finished stainless steel bar or rod, specifically as a high-nickel alloy product. The material offers excellent corrosion resistance in marine environments.
Vacuum Arc Remelted 17-4 PH Stainless Steel Flat Bar
17-4 PH precipitation hardening stainless steel flat bar made by vacuum arc remelting for superior cleanliness and fatigue resistance. Cold-finished and not further worked, it fits tariff item 7222.20.00. The flat bar's rectangular cross-section meets the definition of bars and rods in Chapter 72.
Vacuum Arc Remelted 321 Stainless Steel Flat Rod
Stabilized 321 stainless flat rod vacuum arc remelted for high-temperature exhaust systems, cold-finished. Classified under tariff item 7222.20.00 as a remelted stainless bar not further worked. The titanium addition prevents carbide precipitation, enhancing high-temperature performance.
Vacuum Arc Remelted 410 Stainless Steel Bar
Martensitic 410 stainless steel bar vacuum arc remelted for cutlery and valve parts, with a cold-finished surface. Classified under tariff item 7222.20.00 as a remelted stainless bar not further worked. Balances hardness and corrosion resistance for demanding applications.
Vacuum Arc Remelted Duplex 2205 Stainless Steel Square Bar
Duplex 2205 stainless steel square bar via vacuum arc remelting, offering corrosion resistance and strength for offshore use. Cold-finished and not further worked, it falls under tariff item 7222.20.00. The square cross-section meets the definition of bars and rods in Chapter 72.