Inconel 625 Cold-Formed Hexagonal Rod
Hexagonal rod of Inconel 625 high-nickel alloy steel (58% nickel minimum), cold-formed for aerospace fasteners and marine hardware. Fits tariff item 7222.20.00 as a stainless steel bar cold-finished, high-nickel alloy. The hexagonal cross-section meets the bar definition in Chapter 72.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the rod is hot-rolled or hot-drawn
Hot-rolled stainless steel bars are classified separately.
If the rod is further worked, such as machined or surface-treated
Additional working beyond cold-forming changes the tariff classification.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Document the high-nickel content (over 24% nickel) and cold-forming process for CBSA
• Confirm the hexagonal rod is not further worked beyond cold-forming
• Verify the cross-section meets the bar definition in Chapter 72 notes
Related Products under Tariff item 7222.20.00
17-4 PH Stainless Steel Cold-Finished Bar 11mm
17-4 PH stainless steel is a precipitation-hardening alloy with less than 8% nickel, cold-finished into an 11 mm round bar for aerospace fasteners. It is classified under tariff item 7222.20.00 as a cold-finished stainless steel bar or rod, specifically for small-diameter products under 18 mm. The material offers superior strength and corrosion resistance after heat treatment.
301 Full Hard Cold-Rolled Bar 10.5mm
301 full hard stainless steel is cold-rolled into a 10.5 mm diameter bar with less than 8% nickel, designed for spring applications. It is classified under tariff item 7222.20.00 as a cold-finished stainless steel bar or rod, specifically for small-diameter products. The full hard condition provides high tensile strength and wear resistance.
316L Stainless Steel Cold-Drawn Rod 12mm Diameter
316L stainless steel is cold-drawn into a 12 mm diameter rod with less than 8% nickel, suitable for marine environments. It is classified under tariff item 7222.20.00 as a cold-finished stainless steel bar or rod, specifically for small-diameter products. The low carbon content enhances weldability and corrosion resistance.
420 Stainless Cold-Finished Dowel Rod 14mm
420 martensitic stainless steel is cold-finished into a 14 mm dowel rod with less than 8% nickel, used for hardened pins. It is classified under tariff item 7222.20.00 as a cold-finished stainless steel bar or rod, specifically for small-diameter products. The material provides corrosion resistance when hardened and tempered.
439LF Stainless Steel Cold Rod 17mm Diameter
439LF stainless steel is a low-ferrite grade cold-formed into a 17 mm round rod with less than 8% nickel, designed for exhaust manifolds. It is classified under tariff item 7222.20.00 as a cold-finished stainless steel bar or rod, specifically for small-diameter products. The material offers optimized weldability and corrosion resistance.
443 Stainless Cold Bar 12.8mm Circular
443 stainless steel is cold-formed into a 12.8 mm circular bar with less than 8% nickel, used for automotive trim. It is classified under tariff item 7222.20.00 as a cold-finished stainless steel bar or rod, specifically for small-diameter products. The ESR-refined material offers improved corrosion resistance and surface quality.