Chapter 7222 — Customs Tariff Headings

7222.20.00Bars and rods, not further worked than cold-formed or cold-finished

7222.30.00Other bars and rods

7222.40.00Angles, shapes and sections

Calculate exact duty for your shipment Not sure about classification? Ask the Tariff Assistant

Products classified under Tariff item 72.22

17-4 PH Hot-Rolled Stainless Round Bar 25mm

This is a 25mm diameter hot-rolled round bar made of 17-4 PH precipitation hardening stainless steel. It has a circular cross-section and has not been further worked after hot rolling, making it a bar of stainless steel under heading 72.22.

304L Hot-Extruded Stainless Steel Rod 38mm Dia

This is a 38mm diameter hot-extruded rod of 304L low-carbon stainless steel with a circular cross-section. It has not been further worked after hot extrusion, qualifying as a bar of stainless steel under heading 72.22.

316 Hot-Drawn Stainless Round Bar 50mm

This is a 50mm diameter hot-drawn round bar of 316 stainless steel with a circular cross-section. It has not been further worked after hot drawing, making it a bar of stainless steel under heading 72.22.

321 Stainless Steel Hot-Rolled Round Rod 12mm

This is a 12mm diameter hot-rolled round rod of 321 stabilized stainless steel with a circular cross-section. It has not been further worked after hot rolling, qualifying as a bar of stainless steel under heading 72.22.

430 Hot-Rolled Stainless Rod 10mm Diameter

This is a 10mm diameter hot-rolled rod of 430 ferritic stainless steel with a circular cross-section. It has not been further worked after hot rolling, making it a bar of stainless steel under heading 72.22.

AISI 410 Hot-Rolled Stainless Round Bar 3/4 Inch

This is a 3/4 inch (19.05mm) diameter hot-rolled round bar of 410 martensitic stainless steel with a circular cross-section. It has not been further worked after hot rolling, qualifying as a bar of stainless steel under heading 72.22.

Duplex 2205 Hot-Drawn Stainless Steel Bar 1 Inch Dia

This is a 1-inch (25.4mm) diameter hot-drawn bar of duplex 2205 stainless steel with a circular cross-section. It has not been further worked after hot drawing, making it a bar of stainless steel under heading 72.22.

Electroslag Remelted 304 Stainless Steel Hot-Rolled Bar

This is a 25mm diameter hot-rolled bar of 304 stainless steel that has been electroslag remelted, with a circular cross-section. It has not been further worked after hot rolling, making it a bar of stainless steel under heading 72.22.

Electroslag Remelted 316L Stainless Steel Round Bar

This is a 316L stainless steel bar produced via electroslag remelting with a circular cross-section, not further worked beyond hot-rolling. The remelting process refines the microstructure for superior cleanliness, but it remains a bar of stainless steel under heading 72.22.

Electroslag Remelted Custom 321 Stainless Steel Bar

This is a 321 stabilized austenitic stainless steel bar, electroslag remelted with a circular hot-drawn section. It has not been further worked after hot drawing, qualifying as a bar of stainless steel under heading 72.22.

Hot-Extruded 316L Stainless Steel Rod 20mm Diameter

This is a 20mm diameter rod of 316L stainless steel produced by hot extrusion with a smooth circular cross-section. It has not been further worked after hot extrusion, qualifying as a bar of stainless steel under heading 72.22.

Hot-Rolled 304 Stainless Steel Round Bar 1/2 Inch Diameter

This is a 1/2 inch (12.7mm) diameter round bar made of 304 stainless steel, hot-rolled to achieve its final shape with a circular cross-section. It has not been further worked after hot rolling, making it a bar of stainless steel under heading 72.22.

Monel 400 Equivalent Hot-Rolled Round Bar 15mm

This is a 15mm diameter hot-rolled round bar of a nickel-copper alloy that is stainless steel equivalent, with a circular cross-section. It has not been further worked after hot rolling, qualifying as a bar of stainless steel under heading 72.22.

Vacuum Arc Remelted 15-5 PH Stainless Steel Round Rod

This is a 20mm diameter hot-extruded rod of 15-5 PH martensitic precipitation hardening stainless steel, vacuum arc remelted, with a circular cross-section. It has not been further worked after hot extrusion, making it a bar of stainless steel under heading 72.22.

Vacuum Arc Remelted 17-4 PH Stainless Steel Rod

This is a 17-4 PH precipitation hardening stainless steel rod of circular cross-section, vacuum arc remelted and hot-drawn. It has not been further worked after hot drawing, qualifying as a bar of stainless steel under heading 72.22.

15-5 PH Stainless Square Rod

15-5 PH stainless steel square rod, hot-rolled, in straight lengths. This precipitation-hardening martensitic stainless steel is supplied without further working, making it a bar of stainless steel under heading 72.22.

304L Low Carbon Hot-Rolled Flat Bar

304L low-carbon stainless steel flat bar, hot-rolled, for welding applications. The flat bar has a rectangular cross-section with a thickness not exceeding one-tenth of the width, qualifying as a bar of stainless steel.

310 Hot-Rolled Stainless Steel Bar

310 hot-rolled stainless steel bar, a high-temperature alloy (25Cr-20Ni) for furnace parts. Supplied as bars not further worked than hot-rolling, this product falls under the 'other' category for stainless steel bars and rods.

316Ti Stabilised Hot-Extruded Rod

316Ti stainless steel rod, hot-extruded, with titanium stabilization for welded structures. The rod is not further worked beyond hot extrusion, making it a bar or rod of stainless steel under heading 72.22.

321 Hot-Rolled Stainless Steel Angle Bar

321 hot-rolled stainless steel angle bar, L-shaped, stabilized with titanium. Although heading 72.22 includes angles, this product is classified under 'other bars and rods' as it is not further worked beyond hot-rolling.

347 Hot-Drawn Stainless Rod

347 hot-drawn stainless rod, niobium-stabilized, for piping applications. The rod is hot-drawn and not further worked, making it a bar or rod of stainless steel under heading 72.22.

409 Hot-Drawn Stainless Steel Rod

409 hot-drawn stainless steel rod, ferritic, for automotive exhaust systems. This corrosion-resistant rod contains no nickel and is not further worked beyond hot-drawing, qualifying as 'other' stainless steel bars and rods.

439 Ferritic Hot-Rolled Bar

439 ferritic stainless steel bar, hot-rolled, for exhaust and decorative applications. The bar is not further worked beyond hot-rolling, making it a stainless steel bar under heading 72.22.

Duplex 2205 Hot-Extruded Stainless Steel Bar

Duplex 2205 stainless steel bar, hot-extruded, offering superior corrosion resistance and strength for oil and gas applications. The bar is not further worked beyond hot extrusion, qualifying as 'other' stainless steel bars and rods.

Hot-Drawn 430 Stainless Steel Hexagonal Rod

Hot-drawn 430 stainless steel hexagonal rod, ferritic, without additional processing. The hexagonal cross-section is uniform along the length, and the rod is not further worked beyond hot-drawing, fitting the 'other' stainless steel bars and rods category.

Hot-Extruded 316L Stainless Steel Flat Bar

Hot-extruded 316L stainless steel flat bar, molybdenum-bearing, not further worked. The flat bar has a rectangular cross-section with a thickness not exceeding one-tenth of the width, qualifying as a stainless steel bar under heading 72.22.

Hot-Rolled 17-4 PH Stainless Steel Square Bar

Hot-rolled 17-4 PH stainless steel square bar, precipitation-hardening, supplied in straight lengths without further treatment. This bar is not further worked beyond hot-rolling, making it a stainless steel bar under heading 72.22.

Hot-Rolled 304 Stainless Steel Half-Round Bar

Hot-rolled 304 stainless steel half-round bar, semi-circular cross-section, for decorative trim. The bar is not further worked beyond hot-rolling, qualifying as 'other' stainless steel bars and rods.

Hot-Rolled 304 Stainless Steel Round Bar

Hot-rolled 304 stainless steel round bar, cylindrical, made from austenitic stainless steel. The bar is not further worked beyond hot-rolling, making it a stainless steel bar under heading 72.22.

Monel 400 Equivalent Stainless Rod

Hot-rolled 410 stainless steel hexagonal bar, martensitic, for pump shafts and valve stems. The bar is not further worked beyond hot-rolling, qualifying as 'other' stainless steel bars and rods.

Cold-Drawn 304L Stainless Steel Bright Round Bar

Cold-drawn 304L stainless steel bright round bar, a low-carbon variant of 304 stainless steel, processed by cold drawing to achieve precise dimensions and a smooth surface. It is not further worked beyond cold-forming, making it classifiable under tariff item 7222.20.00 as a cold-finished stainless steel bar or rod.

Cold-Drawn 304 Stainless Hex Rod

Cold-drawn 304 stainless steel hexagonal rod, produced by cold drawing to achieve a hexagonal cross-section and tight tolerances. It is used as stock for nuts and bolts and is not further worked beyond cold-finishing, qualifying for tariff item 7222.20.00.

Cold-Drawn 304 Stainless Steel Threaded Rod

Cold-drawn 304 stainless steel threaded rod, manufactured by cold drawing and then threading to create a continuous thread for construction fasteners. Although threading is a form of working, it is considered part of the cold-forming process for this tariff item, as the rod is not further worked beyond cold-finishing.

Cold-Drawn 316L Stainless Steel Flat Bar

Cold-drawn 316L stainless steel flat bar, processed by cold drawing to achieve a flat rectangular cross-section with tight tolerances and enhanced mechanical properties. It is suitable for marine and chemical environments and is not further worked beyond cold-finishing, qualifying for tariff item 7222.20.00.

Cold-Drawn Duplex 2205 Stainless Steel Round Rod

Cold-drawn Duplex 2205 stainless steel round rod, a high-strength duplex stainless steel processed by cold drawing for use in oil and gas piping supports. It is not further worked beyond cold-finishing and contains high chromium and molybdenum, qualifying for tariff item 7222.20.00.

Cold-Finished 17-4 PH Stainless Steel Hexagonal Rod

Cold-finished 17-4 PH stainless steel hexagonal rod, a precipitation-hardening stainless steel processed by cold finishing for high-strength aerospace applications. It is not further worked beyond cold-finishing, qualifying for tariff item 7222.20.00 as a cold-finished stainless steel rod.

Cold-Finished 304 Stainless Steel Round Bar

Cold-finished 304 stainless steel round bar, produced by cold-forming or cold-finishing processes to achieve a smooth surface and precise dimensions. It is a stainless steel bar not further worked beyond cold-finishing, qualifying for tariff item 7222.20.00.

Cold-Finished 310 Stainless Flat Bar

Cold-finished 310 stainless flat bar, a high-temperature stainless steel processed by cold finishing for furnace parts. It is not further worked beyond cold-finishing and is oxidation-resistant, qualifying for tariff item 7222.20.00.

Cold-Finished 316 Stainless Steel Hollow Bar

Cold-finished 316 stainless steel hollow bar, a hollow drill bar cold-finished for mining tools, not a true tube. It is classified under tariff item 7222.20.00 as a cold-formed stainless bar with a central hole from the process, without cladding. High molybdenum content provides corrosion resistance.

Cold-Finished 410 Stainless Steel Bright Bar

Cold-finished 410 stainless steel bright bar, a martensitic stainless steel processed by cold finishing for shafts and pump components. It is not further worked beyond cold-finishing, qualifying for tariff item 7222.20.00 as a cold-formed stainless bar.

Cold-Finished Nitronic 60 Stainless Rod

Cold-finished Nitronic 60 stainless rod, a high-strength stainless steel processed by cold finishing for wear-resistant valves. It is not further worked beyond cold-finishing, qualifying for tariff item 7222.20.00 as a cold-formed stainless rod.

Cold-Formed 304 Stainless Steel Square Bar

Cold-formed 304 stainless steel square bar, produced by cold forming to achieve a square cross-section for architectural and furniture framing. It is not further worked beyond cold-forming, qualifying for tariff item 7222.20.00 as a cold-finished stainless bar.

Cold-Formed 316Ti Stainless Square Rod

Cold-formed 316Ti stainless square rod, a titanium-stabilized stainless steel processed by cold forming for heat exchangers. It is not further worked beyond cold-forming, qualifying for tariff item 7222.20.00 as a cold-finished stainless rod.

Cold-Formed 321 Stainless Steel Angle Bar

Cold-formed 321 stainless steel angle bar, a stabilized stainless steel L-shaped angle bar processed by cold forming for exhaust systems. It is not further worked beyond cold-forming, qualifying for tariff item 7222.20.00 as a cold-finished stainless bar or rod in angle form.

Cold-Formed 430 Stainless Steel Flat Rod

Cold-formed 430 stainless steel flat rod, a ferritic stainless steel processed by cold forming for automotive trim. It is not further worked beyond cold-forming, qualifying for tariff item 7222.20.00 as a cold-finished stainless bar.

17-4 PH Stainless Steel Round Bar

17-4 PH stainless steel round bar is a precipitation-hardening martensitic stainless steel offering high strength and corrosion resistance. It is supplied as a hot-rolled or cold-finished bar with a solid uniform cross-section, fitting the definition of 'other bars and rods' of stainless steel in heading 72.22.

304 Stainless Steel Angle Bar

304 stainless steel angle bar is an L-shaped section with equal legs, hot-rolled from austenitic stainless steel. It is used in structural framing and architectural applications, and its uniform cross-section along the length qualifies it as an angle, shape, or section under heading 72.22.

310 Stainless Steel I-Beam Section

310 stainless steel I-beam section is a hot-rolled shape with an I-shaped cross-section, made from high-temperature-resistant austenitic stainless steel. It is used for furnace parts and load-bearing frameworks, and its uniform cross-section qualifies it as a shape or section under heading 72.22.

316L Stainless Steel U-Channel Section

316L stainless steel U-channel section is a hot-rolled channel shape with a U-shaped cross-section, made from low-carbon molybdenum-bearing austenitic stainless steel. It is used in marine and corrosive environments, and its uniform cross-section qualifies it as a shape or section under heading 72.22.

321 Stainless Steel Square Section Bar

321 stainless steel square section bar is a hot-rolled bar with a square cross-section, made from titanium-stabilized austenitic stainless steel for high-temperature applications. It is not hollow and has a uniform solid cross-section, fitting the definition of 'other bars and rods' under heading 72.22.

409 Stainless Steel Flat Strip Bar

409 stainless steel flat strip bar is a hot-rolled flat bar with a rectangular cross-section, made from ferritic stainless steel for exhaust systems. Its thickness is greater than one-tenth of the width, qualifying it as a bar rather than a flat-rolled product, and it fits under heading 72.22.

430 Stainless Steel L-Profile Rod

430 stainless steel L-profile rod is a hot-rolled angle shape with an L-shaped cross-section, made from ferritic stainless steel for automotive trim. It has a uniform cross-section along its length, qualifying it as an angle, shape, or section under heading 72.22.

904L Stainless Steel Hexagonal Bar

904L stainless steel hexagonal bar is a hot-rolled bar with a hexagonal cross-section, made from super-austenitic stainless steel with high nickel and molybdenum content for chemical processing. It has a uniform solid cross-section, fitting the definition of 'other bars and rods' under heading 72.22.

Duplex 2205 Stainless Steel Flat Bar

Duplex 2205 stainless steel flat bar is a hot-rolled flat bar with a rectangular cross-section, made from duplex stainless steel with high strength for offshore platforms. Its thickness exceeds one-tenth of the width, qualifying it as a bar, and it fits under heading 72.22.

Stainless Steel C-Channel 100x50mm

Stainless steel C-channel section 100x50mm is a hot-rolled channel shape with a C-shaped cross-section, made from stainless steel for conveyor frames. It has a uniform cross-section along its length, qualifying it as a shape or section under heading 72.22.

Stainless Steel Equal Angle 50x50x5mm

Stainless steel equal angle 50x50x5mm is a hot-rolled angle shape with equal legs, made from stainless steel for machinery frames. It has a uniform cross-section along its length, qualifying it as an angle, shape, or section under heading 72.22.

Stainless Steel H-Beam Section 100x100mm

Stainless steel H-beam section 100x100mm is a hot-rolled shape with an H-shaped cross-section, made from stainless steel for load-bearing frameworks. It has a uniform cross-section along its length, qualifying it as a shape or section under heading 72.22.