17-4 PH Stainless Steel Round Bar
17-4 PH stainless steel round bar is a precipitation-hardening martensitic stainless steel offering high strength and corrosion resistance. It is supplied as a hot-rolled or cold-finished bar with a solid uniform cross-section, fitting the definition of 'other bars and rods' of stainless steel in heading 72.22.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the bar is of stainless steel with a nickel content of 24% or more by weight
High-nickel stainless steel bars are classified separately under this statistical subheading.
If the bar is of other stainless steel (not high-nickel) and not further worked
This covers other stainless steel bars and rods, excluding those with high nickel content.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the bar is not further worked beyond hot-rolling or cold-forming (e.g
• no machining or threading) to stay in this tariff item
• Provide a mill test certificate showing the chemical composition (e.g
• 15-17% Cr, 3-5% Ni, 3-5% Cu) to confirm it is stainless steel
• Verify the dimensions meet the definition of bars (solid cross-section, thickness > 1/10 width for rectangular shapes)
Related Products under Tariff item 7222.30.00
304 Stainless Steel Angle Bar
304 stainless steel angle bar is an L-shaped section with equal legs, hot-rolled from austenitic stainless steel. It is used in structural framing and architectural applications, and its uniform cross-section along the length qualifies it as an angle, shape, or section under heading 72.22.
310 Stainless Steel I-Beam Section
310 stainless steel I-beam section is a hot-rolled shape with an I-shaped cross-section, made from high-temperature-resistant austenitic stainless steel. It is used for furnace parts and load-bearing frameworks, and its uniform cross-section qualifies it as a shape or section under heading 72.22.
316L Stainless Steel U-Channel Section
316L stainless steel U-channel section is a hot-rolled channel shape with a U-shaped cross-section, made from low-carbon molybdenum-bearing austenitic stainless steel. It is used in marine and corrosive environments, and its uniform cross-section qualifies it as a shape or section under heading 72.22.
321 Stainless Steel Square Section Bar
321 stainless steel square section bar is a hot-rolled bar with a square cross-section, made from titanium-stabilized austenitic stainless steel for high-temperature applications. It is not hollow and has a uniform solid cross-section, fitting the definition of 'other bars and rods' under heading 72.22.
409 Stainless Steel Flat Strip Bar
409 stainless steel flat strip bar is a hot-rolled flat bar with a rectangular cross-section, made from ferritic stainless steel for exhaust systems. Its thickness is greater than one-tenth of the width, qualifying it as a bar rather than a flat-rolled product, and it fits under heading 72.22.
430 Stainless Steel L-Profile Rod
430 stainless steel L-profile rod is a hot-rolled angle shape with an L-shaped cross-section, made from ferritic stainless steel for automotive trim. It has a uniform cross-section along its length, qualifying it as an angle, shape, or section under heading 72.22.