New

Ask Wove anything about tariffs.

Try Tariff Assistant

Other

A live specimen of the mongoose family, including Galidia, Galidictis, Mungotictis, Salanoia, Suricata, Herpestes, Helogale, Donogale, Atilax, Mungos, Crossarchus, Liberiictics, Ichneumia, Bdeogale, Rhynchogale, Cynictis, Paracynictis and Cryptoprocta, unless the Minister of Public Safety and Emergency Preparedness is satisfied, in accordance with the written advice of the Canadian Wildlife Service, that the specimen is imported for breeding, study or exhibition purposes, in confinement, by zoological institutions approved by the Canadian Wildlife Service; A live bird of the Starling family (Sturnidae), other than (a) the European Starling (Sturnus vulgaris) and the Chinese Talking or Hill Mynah (Gracula religiosa), or (b) Rothschilds or Bali Mynah (Leucopsar rothschildi) for propagation purposes; Any other non-game bird, other than (a) a domestic bird of a kind kept for food purposes, (b) a bird intended solely for exhibition in a public zoological park, or (c) a bird intended solely to be kept in confinement in a cage or to be used for purposes of public entertainment; Aigrettes, egret plumes or so-called osprey plumes and the feathers, quills, heads, wings, tails, skins, or parts of skins of wild birds, either raw or manufactured, other than (a) the feathers or plumes of ostriches, the plumage of the English pheasant, the Indian peacock, birds imported alive, or of wild birds of groups recognized as game birds in an Act of Parliament or of the legislature of a province relating to game under which an open season is provided, or (b) specimens imported, in accordance with regulations made by the Minister of Public Safety and Emergency Preparedness, for any museum or for scientific or educational purposes; Base or counterfeit coins; Used or second-hand mattresses or materials therefrom, other than (a) mattresses imported under tariff item No. 9805.00.00, 9806.00.00, 9807.00.00, 9808.00.00 or 9810.00.00, or (b) materials from used or second hand mattresses, when imported after having been cleaned and fumigated, in accordance with regulations made by the Minister of Public Safety and Emergency Preparedness, accompanied by such certificates as are designated by the Minister of Public Safety and Emergency Preparedness; Reprints of Canadian copyrighted works and reprints of British copyrighted works that have been copyrighted in Canada; Goods manufactured or produced wholly or in part by prison labour; Goods mined, manufactured or produced wholly or in part by forced labour; Smoke screen apparatus for use on motor vehicles or on vessels of Chapter 89; Used or second-hand motor vehicles of all kinds, manufactured prior to the calendar year in which importation into Canada is sought to be made, other than motor vehicles (a) imported under tariff item No. 9801.10.10, 9801.10.20, 9801.10.30, 9807.00.00, 9808.00.00 or 9810.00.00, (b) imported by a settler on the settler's first arrival but not entitled to be classified under tariff item No. 9807.00.00, (c) forfeited or confiscated for any offence under the Customs laws, or the laws of any province of Canada, (d) left by bequest, (e) imported from the United States, (f) imported from Mexico (i) in the 2009 or 2010 calendar year, if the motor vehicles are not less than ten years old, (ii) in the 2011 or 2012 calendar year, if the motor vehicles are not less than eight years old, (iii) in the 2013 or 2014 calendar year, if the motor vehicles are not less than six years old, (iv) in the 2015 or 2016 calendar year, if the motor vehicles are not less than four years old, (v) in the 2017 or 2018 calendar year, if the motor vehicles are not less than two years old, or (vi) on or after January 1, 2019; Used or second-hand aircraft of all kinds, other than aircraft (a) classified under tariff item No. 9803.00.00 or 9810.00.00, civil aircraft of heading 88.01 or 88.02, or aircraft engaged solely in international traffic, (b) forfeited or confiscated for any offence under any Act of Parliament relating to customs, the Air Regulations or an Act of the legislature of any province, (c) imported by the Department of National Defence for military purposes, or (d) imported from the United States; White phosphorus matches; Any goods, in association with which there is used any description that is false in a material respect as to the geographical origin of the goods or the importation of which is prohibited by an order made under the Trade-marks Act. > Brakes, including coaster braking hubs, and hub brakes, and parts thereof > Pecans: > Other

Duty Rate (from China)

0%
MFN TariffFree
Total Effective Rate0%

Products classified under Tariff item 7222.30.00.90

7222.30.00

17-4 PH Stainless Steel Round Bar

17-4 PH stainless steel round bar is a precipitation-hardening martensitic stainless steel offering high strength and corrosion resistance. It is supplied as a hot-rolled or cold-finished bar with a solid uniform cross-section, fitting the definition of 'other bars and rods' of stainless steel in heading 72.22.

7222.30.00

304 Stainless Steel Angle Bar

304 stainless steel angle bar is an L-shaped section with equal legs, hot-rolled from austenitic stainless steel. It is used in structural framing and architectural applications, and its uniform cross-section along the length qualifies it as an angle, shape, or section under heading 72.22.

7222.30.00

310 Stainless Steel I-Beam Section

310 stainless steel I-beam section is a hot-rolled shape with an I-shaped cross-section, made from high-temperature-resistant austenitic stainless steel. It is used for furnace parts and load-bearing frameworks, and its uniform cross-section qualifies it as a shape or section under heading 72.22.

7222.30.00

316L Stainless Steel U-Channel Section

316L stainless steel U-channel section is a hot-rolled channel shape with a U-shaped cross-section, made from low-carbon molybdenum-bearing austenitic stainless steel. It is used in marine and corrosive environments, and its uniform cross-section qualifies it as a shape or section under heading 72.22.

7222.30.00

321 Stainless Steel Square Section Bar

321 stainless steel square section bar is a hot-rolled bar with a square cross-section, made from titanium-stabilized austenitic stainless steel for high-temperature applications. It is not hollow and has a uniform solid cross-section, fitting the definition of 'other bars and rods' under heading 72.22.

7222.30.00

409 Stainless Steel Flat Strip Bar

409 stainless steel flat strip bar is a hot-rolled flat bar with a rectangular cross-section, made from ferritic stainless steel for exhaust systems. Its thickness is greater than one-tenth of the width, qualifying it as a bar rather than a flat-rolled product, and it fits under heading 72.22.

7222.30.00

430 Stainless Steel L-Profile Rod

430 stainless steel L-profile rod is a hot-rolled angle shape with an L-shaped cross-section, made from ferritic stainless steel for automotive trim. It has a uniform cross-section along its length, qualifying it as an angle, shape, or section under heading 72.22.

7222.30.00

904L Stainless Steel Hexagonal Bar

904L stainless steel hexagonal bar is a hot-rolled bar with a hexagonal cross-section, made from super-austenitic stainless steel with high nickel and molybdenum content for chemical processing. It has a uniform solid cross-section, fitting the definition of 'other bars and rods' under heading 72.22.

7222.30.00

Duplex 2205 Stainless Steel Flat Bar

Duplex 2205 stainless steel flat bar is a hot-rolled flat bar with a rectangular cross-section, made from duplex stainless steel with high strength for offshore platforms. Its thickness exceeds one-tenth of the width, qualifying it as a bar, and it fits under heading 72.22.

7222.30.00

Stainless Steel C-Channel 100x50mm

Stainless steel C-channel section 100x50mm is a hot-rolled channel shape with a C-shaped cross-section, made from stainless steel for conveyor frames. It has a uniform cross-section along its length, qualifying it as a shape or section under heading 72.22.

7222.30.00

Stainless Steel Equal Angle 50x50x5mm

Stainless steel equal angle 50x50x5mm is a hot-rolled angle shape with equal legs, made from stainless steel for machinery frames. It has a uniform cross-section along its length, qualifying it as an angle, shape, or section under heading 72.22.

7222.30.00

Stainless Steel H-Beam Section 100x100mm

Stainless steel H-beam section 100x100mm is a hot-rolled shape with an H-shaped cross-section, made from stainless steel for load-bearing frameworks. It has a uniform cross-section along its length, qualifying it as a shape or section under heading 72.22.

7222.30.00

Stainless Steel T-Section Bar 75x75x6mm

Stainless steel T-section bar 75x75x6mm is a hot-rolled shape with a T-shaped cross-section, made from stainless steel for framing and supports. It has a uniform cross-section along its length, qualifying it as a shape or section under heading 72.22.

7222.30.00

Stainless Steel Unequal Angle 75x50x6mm

Stainless steel unequal angle 75x50x6mm is a hot-rolled angle shape with unequal legs, made from stainless steel for stair stringers. It has a uniform cross-section along its length, qualifying it as an angle, shape, or section under heading 72.22.

7222.30.00

Stainless Steel Z-Section Purlin

Stainless steel Z-section purlin is a hot-rolled shape with a Z-shaped cross-section, made from stainless steel for roofing supports. It has a uniform cross-section along its length, qualifying it as a shape or section under heading 72.22.