Other
Other bars and rods of stainless steel; angles, shapes and sections of stainless steel. > Bars and rods, not further worked than hot-rolled, hot-drawn or extruded: > Other
Duty Rate (from China)
Products classified under Tariff item 7222.1
15-5 PH Stainless Steel Bar Stock
15-5 PH precipitation hardening stainless steel round bar stock, hot-rolled with a nickel content of 15%. This product is used in aerospace landing gear components and is classified as a stainless steel bar not further worked than hot-rolled, with a nickel content between 8% and 24%.
7222.11.0017-4 PH Hot-Rolled Stainless Round Bar 25mm
A 25mm diameter precipitation hardening 17-4 PH stainless steel round bar, hot-rolled to a circular cross-section and not further worked. This product falls under tariff item 7222.11.00 as a bar or rod of stainless steel, of circular cross-section, not further worked than hot-rolled, hot-drawn or extruded. Its high strength and corrosion resistance make it suitable for fasteners and gears.
7222.11.0017-4PH Precipitation Hardening Round Rod
>- 17-4PH precipitation hardening stainless steel round rod, hot-rolled, 120mm diameter circular section, with less than 4% nickel. This rod is not further worked than hot-rolling and is classified under tariff item 7222.11.00. It is used in aerospace and valve stem applications due to its high strength and corrosion resistance.
7222.11.0017-4 PH Stainless Steel Hot-Rolled Bar
17-4 PH precipitation hardening stainless steel hot-rolled round bar with a nickel content of 11% and a diameter of 40 mm. This product is used for valve stems and is classified as a stainless steel bar not further worked than hot-rolled, with a nickel content between 8% and 24%.
7222.11.00304L Hot-Extruded Stainless Steel Rod 38mm Dia
A 38mm diameter low-carbon 304L stainless steel rod, hot-extruded with a circular cross-section and not further worked. It is classified under tariff item 7222.11.00 as a stainless steel bar or rod of circular cross-section, not further worked than hot-rolled, hot-drawn or extruded. The low carbon content enhances weldability, making it common in food processing equipment.
7222.11.00310 Stainless Steel Round Rod
310 stainless steel round rod, hot-drawn with a nickel content of 19-22% and a diameter of 80 mm. This product is used for high-temperature furnace parts and is classified as a stainless steel bar not further worked than hot-drawn, with a nickel content between 8% and 24%.
7222.11.00316 Hot-Drawn Stainless Round Bar 50mm
A 50mm diameter 316 stainless steel bar, hot-drawn to a circular cross-section and not further worked. This product is classified under tariff item 7222.11.00 as a stainless steel bar or rod of circular cross-section, not further worked than hot-rolled, hot-drawn or extruded. Its corrosion resistance makes it a standard choice in the chemical industry.
7222.11.00316L Low-Nickel Hot-Rolled Stainless Round Rod
>- 316L low-nickel stainless steel round rod, hot-drawn, circular cross-section with maximum 100mm diameter, containing less than 8% nickel. This rod is not further worked than hot-drawing and falls under tariff item 7222.11.00. It is used in marine hardware and chemical processing equipment.
7222.11.00316L Stainless Steel Extruded Rod
316L stainless steel hot-extruded round rod with a nickel content of 10% and a diameter of 50 mm. This low-carbon product is used for pharmaceutical equipment shafts and is classified as a stainless steel bar not further worked than hot-extruded, with a nickel content between 8% and 24%.
7222.11.00321 Stainless Steel Hot-Extruded Rod
321 stainless steel hot-extruded round rod with a nickel content of 9-12% and a diameter of 25 mm. This product is used for aircraft exhaust components and is classified as a stainless steel bar not further worked than hot-extruded, with a nickel content between 8% and 24%.
7222.11.00321 Stainless Steel Hot-Rolled Round Rod 12mm
A 12mm diameter hot-rolled 321 stabilized stainless steel rod, with a circular cross-section and not further worked. It is classified under tariff item 7222.11.00 as a stainless steel bar or rod of circular cross-section, not further worked than hot-rolled, hot-drawn or extruded. The titanium stabilization provides excellent weldability, suitable for aerospace and exhaust applications.
7222.11.00409 Hot-Rolled Stainless Exhaust Tubing Rod
Grade 409 ferritic stainless steel round bar, hot-rolled to a 90 mm diameter, with a nickel content below 1%. This product is used in the fabrication of automotive exhaust systems and qualifies as a stainless steel bar not further worked than hot-rolled.
7222.11.00430 Hot-Rolled Stainless Rod 10mm Diameter
A 10mm diameter ferritic 430 stainless steel rod, hot-rolled with a circular cross-section and not further worked. This product is classified under tariff item 7222.11.00 as a stainless steel bar or rod of circular cross-section, not further worked than hot-rolled, hot-drawn or extruded. Its corrosion resistance and formability make it suitable for automotive trim applications.
7222.11.00AISI 304 Hot-Rolled Stainless Steel Round Bar
AISI 304 stainless steel round bar, hot-rolled with a circular cross-section under 152.4 mm diameter and a nickel content certified below 8%. This product is used in structural applications and is classified as a stainless steel bar not further worked than hot-rolled.
7222.11.00AISI 410 Hot-Rolled Stainless Round Bar 3/4 Inch
A 3/4 inch diameter hot-rolled round bar made from martensitic 410 stainless steel, with a circular cross-section and not further worked. It is classified under tariff item 7222.11.00 as a stainless steel bar or rod of circular cross-section, not further worked than hot-rolled, hot-drawn or extruded. This grade is commonly used in valve stems and pump shafts due to its hardness and wear resistance.
7222.11.00AL-6XN Hot-Rolled Round Rod
>- AL-6XN super-austenitic stainless steel hot-rolled rod, circular 22mm diameter, containing 23.5-25.5% nickel. This high-nickel stainless steel rod is not further worked than hot-rolling and is classified under tariff item 7222.11.00. It is used in seawater desalination due to its excellent resistance to chloride corrosion.
7222.11.00Alloy 20 Hot-Rolled Stainless Rod
>- Alloy 20 (Carpenter 20Cb3, UNS N08020) hot-rolled round rod, 50mm diameter, with 32-38% nickel. This high-nickel stainless steel rod is not further worked than hot-rolling and falls under tariff item 7222.11.00. It is used in sulfuric acid handling due to its exceptional corrosion resistance.
7222.11.00Duplex 2205 Hot-Drawn Stainless Steel Bar 1 Inch Dia
A 1-inch diameter hot-drawn duplex 2205 stainless steel bar, with a circular cross-section and not further worked. This product is classified under tariff item 7222.11.00 as a stainless steel bar or rod of circular cross-section, not further worked than hot-rolled, hot-drawn or extruded. Its high strength and corrosion resistance make it ideal for offshore oil platforms.
7222.11.00Electroslag Remelted 304 Stainless Steel Hot-Rolled Bar
A 25mm diameter standard 304 austenitic stainless steel bar, electroslag remelted and hot-rolled only, with a circular cross-section and not further worked. It is classified under tariff item 7222.11.00 as a stainless steel bar or rod of circular cross-section, not further worked than hot-rolled, hot-drawn or extruded. The electroslag remelting process refines the microstructure for superior cleanliness, making it ideal for corrosion-resistant structural parts.
7222.11.00Electroslag Remelted 316L Stainless Steel Round Bar
A 316L stainless steel bar produced via electroslag remelting with a circular cross-section, not further worked beyond hot-rolling. It is classified under tariff item 7222.11.00 as a stainless steel bar or rod of circular cross-section, not further worked than hot-rolled, hot-drawn or extruded. The remelting process refines the microstructure for superior cleanliness, enhancing corrosion resistance for demanding applications.
7222.11.00Electroslag Remelted Custom 321 Stainless Steel Bar
A 321 stabilized austenitic stainless steel bar, electroslag remelted for weldability in exhaust systems, with a circular hot-drawn section and not further worked. It is classified under tariff item 7222.11.00 as a stainless steel bar or rod of circular cross-section, not further worked than hot-rolled, hot-drawn or extruded. The titanium stabilization and remelting process enhance weldability and corrosion resistance.
7222.11.00Electroslag Remelted Inconel 718 Equivalent Stainless Bar
A high-performance stainless steel bar akin to Inconel 718, electroslag remelted with a circular cross-section for turbine blades, not further worked than hot-rolled. It is classified under tariff item 7222.11.00 as a stainless steel bar or rod of circular cross-section, not further worked than hot-rolled, hot-drawn or extruded, provided it meets the stainless steel definition with at least 10.5% chromium. The remelting process improves cleanliness for high-temperature applications.
7222.11.00Ferritic 430 Hot-Extruded Stainless Steel Bar
Ferritic 430 grade stainless steel round bar, hot-extruded with a diameter of 80 mm and a nickel content below 0.5%. This product is commonly used in automotive exhaust components and qualifies as a stainless steel bar not further worked than hot-extruded.
7222.11.00Hastelloy C-276 Hot-Rolled Bar
>- Hastelloy C-276 hot-rolled circular bar, 38mm diameter, with 57% nickel, 16% molybdenum, and 15-17% chromium. This high-nickel alloy steel bar is not further worked than hot-rolling and is classified under tariff item 7222.11.00. It is used for extreme corrosion resistance in chemical processing.
7222.11.00Hastelloy X Hot-Extruded Bar
>- Hastelloy X hot-extruded circular bar, 45mm diameter, with 47% nickel superalloy composition. This high-nickel alloy steel bar is not further worked than hot-extrusion and falls under tariff item 7222.11.00. It is used in gas turbine combustion zones due to its high-temperature strength.
7222.11.00Hot-Extruded 316L Stainless Steel Rod 20mm Diameter
A 20mm diameter rod of 316L stainless steel produced by hot extrusion, featuring a smooth circular cross-section and not further worked. It is classified under tariff item 7222.11.00 as a stainless steel bar or rod of circular cross-section, not further worked than hot-rolled, hot-drawn or extruded. The low carbon content improves weldability, making it suitable for pharmaceutical equipment.
7222.11.00Hot-Rolled 304 Stainless Steel Round Bar 1/2 Inch Diameter
A 1/2 inch diameter round bar made from 304 stainless steel, hot-rolled to achieve its final shape with a circular cross-section and not further worked. This product is classified under tariff item 7222.11.00 as a stainless steel bar or rod of circular cross-section, not further worked than hot-rolled, hot-drawn or extruded. It is widely used in structural applications due to its corrosion resistance and strength.
7222.11.00Incoloy 800 Hot-Rolled Round Bar
>- Incoloy 800 hot-rolled round bar, 25mm diameter, containing over 30% nickel and 20% chromium. This high-nickel alloy steel bar is not further worked than hot-rolling and is classified under tariff item 7222.11.00. It is used in high-temperature applications such as furnace components.
7222.11.00Incoloy 825 Extruded Round Bar
>- Incoloy 825 hot-extruded bar, 30mm circular cross-section, with 38-46% nickel and titanium stabilization. This high-nickel alloy steel bar is not further worked than hot-extrusion and falls under tariff item 7222.11.00. It is used for oil and gas downhole tools due to its resistance to sulfide stress cracking.
7222.11.00Inconel 600 Hot-Rolled Bar
>- Inconel 600 hot-rolled round bar, 35mm diameter, with 72% minimum nickel and 14-17% chromium. This high-nickel alloy steel bar is not further worked than hot-rolling and is classified under tariff item 7222.11.00. It is used in nitration plants due to its resistance to caustic and chloride environments.
7222.11.00Inconel 625 Hot-Extruded Rod
>- Inconel 625 hot-extruded round rod, 19mm diameter, with 58% minimum nickel, 20-23% chromium, and molybdenum. This high-nickel superalloy rod is not further worked than hot-extrusion and falls under tariff item 7222.11.00. It is used for pitting resistance in marine and chemical applications.
7222.11.00Inconel 718 Hot-Rolled Rod
>- Inconel 718 hot-rolled round rod, 19mm diameter, with 52.5% minimum nickel and niobium. This age-hardenable high-nickel alloy steel rod is not further worked than hot-rolling and is classified under tariff item 7222.11.00. It is used for jet engine shafts due to its high strength at elevated temperatures.
7222.11.00Low-Nickel 439 Stainless Steel Round Bar
439 ferritic stainless steel round bar, hot-drawn to a 50 mm diameter with a nickel content below 0.5%. This corrosion-resistant product is used in appliance trim and qualifies as a stainless steel bar not further worked than hot-drawn.
7222.11.00Martensitic 410 Hot-Rolled Round Rod
410 martensitic stainless steel round rod, hot-rolled with a maximum dimension of 140 mm and a nickel content below 0.5%. This heat-treatable grade is used for cutlery blanks and fasteners, and qualifies as a stainless steel bar not further worked than hot-rolled.
7222.11.00Monel 400 Equivalent Hot-Rolled Round Bar 15mm
A 15mm diameter hot-rolled bar made from a nickel-copper alloy similar to Monel 400, with a circular cross-section and not further worked. It is classified under tariff item 7222.11.00 as a stainless steel bar or rod of circular cross-section, not further worked than hot-rolled, hot-drawn or extruded, provided it meets the definition of stainless steel with at least 10.5% chromium. This material is used in marine propeller shafts due to its corrosion resistance.
7222.11.00Monel 400 Hot-Drawn Round Rod
>- Monel 400 hot-drawn round rod, 12mm diameter, with 63% minimum nickel and 28-34% copper. This high-nickel alloy steel rod is not further worked than hot-drawing and falls under tariff item 7222.11.00. It is used in marine applications due to its excellent corrosion resistance in seawater.
7222.11.00Vacuum Arc Remelted 15-5 PH Stainless Steel Round Rod
A 20mm diameter 15-5 PH martensitic precipitation hardening stainless rod, vacuum arc remelted, with a circular cross-section and hot-extruded, not further worked. It is classified under tariff item 7222.11.00 as a stainless steel bar or rod of circular cross-section, not further worked than hot-rolled, hot-drawn or extruded. This material is used in aerospace landing gear due to its high strength and toughness.
7222.11.00Vacuum Arc Remelted 17-4 PH Stainless Steel Rod
>- Vacuum arc remelted 17-4 PH precipitation hardening stainless steel rod of circular cross-section, hot-drawn. This rod is not further worked after hot-drawing, making it a bar or rod of stainless steel under heading 72.22. Its high strength and corrosion resistance suit turbine components.
7222.11.00Vacuum Arc Remelted Duplex 2205 Stainless Rod
>- Duplex 2205 (S31803) stainless steel rod, vacuum arc remelted, 1-inch circular cross-section, extruded or hot-drawn. This rod is not further worked after hot-forming and is classified as a stainless steel bar or rod of circular cross-section. Its duplex structure offers high strength and corrosion resistance for offshore applications.
7222.11.00Vacuum Arc Remelted Nitronic 60 Stainless Rod
>- Nitronic 60 high-manganese austenitic stainless steel rod, vacuum arc remelted, 38mm circular cross-section. This rod is not further worked than hot-drawn or extruded, and its circular cross-section places it under tariff item 7222.11.00. It is used for wear-resistant valves due to its high strength and galling resistance.
7222.19.0015-5 PH Stainless Square Rod
15-5 PH stainless steel square rod, hot-rolled, is a precipitation-hardening martensitic stainless steel with high strength and corrosion resistance. It is not further worked beyond hot-rolling, making it a bar of stainless steel under heading 72.22. This product is used in aerospace and other demanding applications.
7222.19.00304L Low Carbon Hot-Rolled Flat Bar
304L low-carbon stainless steel flat bar, hot-rolled, is a bar of stainless steel with a rectangular cross-section. It is not further worked beyond hot-rolling, making it classifiable under heading 72.22. This product is used in welding applications due to its low carbon content.
7222.19.00310 Hot-Rolled Stainless Steel Bar
310 hot-rolled stainless steel bar is an austenitic stainless steel with high chromium and nickel content, designed for high-temperature applications like furnace parts. It is not further worked beyond hot-rolling, making it a bar of stainless steel under heading 72.22. This product is classifiable under tariff item 7222.19.00 as other stainless steel bars.
7222.19.00316Ti Stabilised Hot-Extruded Rod
316Ti stabilized stainless steel rod, hot-extruded, is a bar of stainless steel with titanium stabilization for improved corrosion resistance in welded structures. It is not further worked beyond hot-extrusion, making it classifiable under heading 72.22. This product is used in applications requiring high strength and corrosion resistance.
7222.19.00321 Hot-Rolled Stainless Steel Angle Bar
321 hot-rolled stainless steel angle bar is a stabilized stainless steel with titanium, produced by hot-rolling and not further worked. While heading 72.22 includes angles, shapes and sections, this product is classifiable under tariff item 7222.19.00 as other bars and rods of stainless steel. It is used in frameworks where titanium stabilization resists intergranular corrosion.
7222.19.00347 Hot-Drawn Stainless Rod
347 hot-drawn stainless rod is a niobium-stabilized stainless steel rod, hot-drawn and not further worked. It is classifiable under heading 72.22 as a bar or rod of stainless steel. This product is used in piping applications requiring high-temperature corrosion resistance.
7222.19.00409 Hot-Drawn Stainless Steel Rod
409 hot-drawn stainless steel rod is a ferritic stainless steel rod, hot-drawn and not further worked. It is classifiable under heading 72.22 as a bar or rod of stainless steel. This product is used in automotive exhaust systems due to its corrosion resistance without nickel.
7222.19.00409 Hot-Rolled Stainless Steel Billet Stock
409 hot-rolled stainless steel billet stock is a square billet of 409 stainless steel, hot-rolled for use as feedstock in automotive exhaust production. It is not further worked beyond hot-rolling, making it classifiable under heading 72.22 as a bar or rod of stainless steel. This product has low nickel content, fitting the 'other' category.
7222.19.00430 Ferritic Stainless Steel Hot-Rolled Channel Section
430 ferritic stainless steel hot-rolled channel section is a 2x0.75x0.125 inch channel used for conveyor frames. It is classified under tariff item 7222.19.00 as 'other' bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded. The product retains a rough hot-rolled surface with no further processing, and its low nickel content (<0.5%) fits the 'other' category.
7222.19.00439 Ferritic Hot-Rolled Bar
439 ferritic stainless steel bar, hot-rolled, is a bar of stainless steel with low nickel content, used for exhaust and decorative applications. It is not further worked beyond hot-rolling, making it classifiable under heading 72.22. This product is used in automotive and architectural applications.
7222.19.00Alloy 20 Hot-Rolled Round Rod
A hot-rolled round rod of Alloy 20, a nickel-chromium alloy with copper and molybdenum, designed for sulfuric acid handling. It is not further worked than hot-rolling, and with a high nickel content, it falls under tariff item 7222.19.00 for other stainless steel bars and rods.
7222.19.00Custom 625 High-Nickel Hot-Rolled Rod
A hot-rolled rod of Custom 625, a high-nickel alloy steel variant for nuclear applications, with enhanced radiation-resistant properties. It is not further worked than hot-rolling, falling under tariff item 7222.19.00 for other stainless steel bars and rods.
7222.19.00Duplex 2205 Hot-Extruded Stainless Steel Bar
Duplex 2205 stainless steel bar, hot-extruded, is a bar of stainless steel with a duplex microstructure offering superior corrosion resistance and strength. It is not further worked beyond hot-extrusion, making it classifiable under heading 72.22. This product is used in oil and gas applications.
7222.19.00Electroslag Remelted 316L Stainless Steel Round Bar
A round bar of 316L stainless steel produced by electroslag remelting (ESR) and hot-rolled to precise dimensions for high-purity applications. It is not further worked than hot-rolled, meeting the definition of other bars and rods of stainless steel under tariff item 7222.19.00.
7222.19.00Electroslag Remelted 410 Stainless Square Bar
A square bar of 410 martensitic stainless steel produced by electroslag remelting and hot-drawn for valve stems and pump shafts. It is not further worked than hot-drawn, qualifying as other bars and rods of stainless steel under tariff item 7222.19.00.
7222.19.00ESR 15-5 PH Stainless Steel Bar for Aerospace Landing Gear
A 15-5 PH stainless steel bar produced by electroslag remelting and hot-forged or rolled for aircraft landing gear components. It is not further worked than hot-rolling or hot-forging, falling under tariff item 7222.19.00 for other stainless steel bars and rods.
7222.19.00ESR 304 Stainless Steel Flat Bar for Reactor Vessels
A flat bar of 304 stainless steel produced by electroslag remelting and hot-rolled for nuclear reactor vessel fabrication requiring ultra-low inclusion levels. It is not further worked than hot-rolled, qualifying as other bars and rods of stainless steel under tariff item 7222.19.00.
7222.19.00Extruded 439 Stainless Steel Angle Bar
Extruded 439 stainless steel angle bar is a 1x1x1/8 inch angle made from ferritic stainless steel (<1% Ni), hot-extruded for architectural framing. It is classified under tariff item 7222.19.00 as 'other' bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded. The product is not further worked beyond the extrusion process, and its low nickel content places it in the 'other' category.
7222.19.00Hastelloy C-276 Hot-Rolled Flat Bar
A flat bar of Hastelloy C-276, a high-nickel alloy steel with 57% nickel, 16% chromium, and 16% molybdenum, hot-rolled for superior resistance to pitting and stress corrosion. It is not further worked than hot-rolling, falling under tariff item 7222.19.00 for other stainless steel bars and rods.
7222.19.00Hot-Drawn 409 Stainless Steel Square Rod
Hot-drawn 409 stainless steel square rod is a half-inch square rod made from 409 grade stainless steel (under 1% nickel), used for exhaust system components and muffler parts. It is classified under tariff item 7222.19.00 as 'other' bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded. The product remains in its hot-worked state without polishing or coating.