Uranus B6 Mo-Rich Hot-Rolled Plate 5.5mm
Uranus B6 molybdenum-rich hot-rolled stainless steel plate, 5.5 mm thick and 1570 mm wide, with 4.2% molybdenum and 6.5% nickel. This flat-rolled product is not further worked than hot-rolled and not in coils, qualifying for tariff item 7219.22.00.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the plate is further processed after hot-rolling
Additional processing such as cold-rolling would change the classification.
If the width is less than 600 mm
Narrower stainless steel plates are classified under heading 7220.
If the plate is in coil form
Hot-rolled stainless steel in coils is classified under a different subheading.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Verify the plate thickness is between 4.75 mm and 10 mm to fall under this tariff item
• Provide documentation of the alloy composition, including molybdenum and nickel content, for customs inspection
• Ensure the product is not further worked than hot-rolled and is not in coils
Related Products under Tariff item 7219.22.00
254 SMO Hot-Rolled Stainless Sheet 6.5mm Thick
254 SMO hot-rolled stainless steel sheet, 6.5 mm thick and 1450 mm wide, with high molybdenum (1.8%) and nickel (18%) content. This flat-rolled product is not further worked than hot-rolled and is not in coils, fitting tariff item 7219.22.00 for stainless steel sheets of this thickness.
316H High-Temp Hot-Rolled Stainless Plate 4.75mm
316H high-temperature grade hot-rolled stainless steel plate, minimum 4.75 mm thick and 1500 mm wide, with 2.1% molybdenum and 11% nickel. This flat-rolled product is not further worked than hot-rolled and not in coils, qualifying for tariff item 7219.22.00.
316L Hot-Rolled Stainless Steel Sheet 1650mm Width
Type 316L low-carbon variant hot-rolled stainless steel sheet, 5 mm thick and 1650 mm wide, with 2.5% molybdenum and 11% nickel. This flat-rolled product is not further worked than hot-rolled and not in coils, meeting the criteria for tariff item 7219.22.00.
316L Hot-Rolled Stainless Steel Slab 8mm Thick Wide
Type 316L low-carbon stainless steel hot-rolled plate, 8 mm thick and exceeding 1880 mm in width, with 12-15% nickel and 2-3% molybdenum. It is not in coils and not further worked than hot-rolled, falling under tariff item 7219.22.00 because its thickness is 8 mm (within 4.75-10 mm).
316Ti Stabilized Hot-Rolled Stainless Sheet 9mm
316Ti stabilized hot-rolled stainless steel sheet, 9 mm thick and 1300 mm wide, with 2.2% molybdenum and 11% nickel. This flat-rolled product is not further worked than hot-rolled and not in coils, meeting the criteria for tariff item 7219.22.00.
317 Stainless Steel Hot-Rolled Plate 1750mm Wide
Type 317 stainless steel hot-rolled plate with 3% molybdenum and 12% nickel, 6 mm thick and 1750 mm wide. This flat-rolled product is not further worked than hot-rolled and not in coils, fitting tariff item 7219.22.00 for stainless steel plates of this thickness.