UNS S31600 Hot-Rolled Stainless Steel Sheet 8mm
UNS S31600 grade hot-rolled stainless steel flat product, 8 mm thick and 1200 mm wide, containing over 10% nickel and about 2.5% molybdenum. This product is not further worked than hot-rolled and not in coils, meeting the specifications of tariff item 7219.22.00.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the sheet is cold-rolled or otherwise further processed
Further processing would move the product to a different subheading.
If the width is less than 600 mm
Stainless steel flat-rolled products under 600 mm width fall under heading 7220.
If the sheet is in coils
Hot-rolled stainless steel in coil form is classified separately.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the product is not further worked beyond hot-rolling and is not in coils
• Keep a certificate of analysis confirming the alloy composition, particularly nickel and molybdenum, for customs verification
• Verify the thickness is within 4.75 mm to 10 mm and width exceeds 600 mm
Related Products under Tariff item 7219.22.00
254 SMO Hot-Rolled Stainless Sheet 6.5mm Thick
254 SMO hot-rolled stainless steel sheet, 6.5 mm thick and 1450 mm wide, with high molybdenum (1.8%) and nickel (18%) content. This flat-rolled product is not further worked than hot-rolled and is not in coils, fitting tariff item 7219.22.00 for stainless steel sheets of this thickness.
316H High-Temp Hot-Rolled Stainless Plate 4.75mm
316H high-temperature grade hot-rolled stainless steel plate, minimum 4.75 mm thick and 1500 mm wide, with 2.1% molybdenum and 11% nickel. This flat-rolled product is not further worked than hot-rolled and not in coils, qualifying for tariff item 7219.22.00.
316L Hot-Rolled Stainless Steel Sheet 1650mm Width
Type 316L low-carbon variant hot-rolled stainless steel sheet, 5 mm thick and 1650 mm wide, with 2.5% molybdenum and 11% nickel. This flat-rolled product is not further worked than hot-rolled and not in coils, meeting the criteria for tariff item 7219.22.00.
316L Hot-Rolled Stainless Steel Slab 8mm Thick Wide
Type 316L low-carbon stainless steel hot-rolled plate, 8 mm thick and exceeding 1880 mm in width, with 12-15% nickel and 2-3% molybdenum. It is not in coils and not further worked than hot-rolled, falling under tariff item 7219.22.00 because its thickness is 8 mm (within 4.75-10 mm).
316Ti Stabilized Hot-Rolled Stainless Sheet 9mm
316Ti stabilized hot-rolled stainless steel sheet, 9 mm thick and 1300 mm wide, with 2.2% molybdenum and 11% nickel. This flat-rolled product is not further worked than hot-rolled and not in coils, meeting the criteria for tariff item 7219.22.00.
317 Stainless Steel Hot-Rolled Plate 1750mm Wide
Type 317 stainless steel hot-rolled plate with 3% molybdenum and 12% nickel, 6 mm thick and 1750 mm wide. This flat-rolled product is not further worked than hot-rolled and not in coils, fitting tariff item 7219.22.00 for stainless steel plates of this thickness.