Hot-Rolled Nicrofer 3620 Nb Stainless Steel Sheet
Hot-rolled Nicrofer 3620 Nb stainless steel sheet, also known as Alloy 20, with a thickness of 6.5 mm and a width exceeding 600 mm. This flat-rolled product is not further worked than hot-rolled and is not in coils, meeting the specifications of tariff item 7219.22.00 for stainless steel sheets of this thickness range.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the sheet is further worked after hot-rolling (e.g., pickled or cold-rolled)
This heading covers flat-rolled stainless steel products that have undergone additional processing beyond hot-rolling.
If the width is less than 600 mm
Narrower stainless steel flat-rolled products fall under heading 7220, which covers widths below 600 mm.
If the product is supplied in coils
Hot-rolled stainless steel in coils is classified separately from flat-rolled products not in coils.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the product is not further worked beyond hot-rolling and is not in coils to qualify for this tariff item
• Provide a mill certificate showing the alloy composition (e.g
• nickel and molybdenum content) to support classification
• Verify the thickness and width measurements are accurately declared on the commercial invoice
Related Products under Tariff item 7219.22.00
254 SMO Hot-Rolled Stainless Sheet 6.5mm Thick
254 SMO hot-rolled stainless steel sheet, 6.5 mm thick and 1450 mm wide, with high molybdenum (1.8%) and nickel (18%) content. This flat-rolled product is not further worked than hot-rolled and is not in coils, fitting tariff item 7219.22.00 for stainless steel sheets of this thickness.
316H High-Temp Hot-Rolled Stainless Plate 4.75mm
316H high-temperature grade hot-rolled stainless steel plate, minimum 4.75 mm thick and 1500 mm wide, with 2.1% molybdenum and 11% nickel. This flat-rolled product is not further worked than hot-rolled and not in coils, qualifying for tariff item 7219.22.00.
316L Hot-Rolled Stainless Steel Sheet 1650mm Width
Type 316L low-carbon variant hot-rolled stainless steel sheet, 5 mm thick and 1650 mm wide, with 2.5% molybdenum and 11% nickel. This flat-rolled product is not further worked than hot-rolled and not in coils, meeting the criteria for tariff item 7219.22.00.
316L Hot-Rolled Stainless Steel Slab 8mm Thick Wide
Type 316L low-carbon stainless steel hot-rolled plate, 8 mm thick and exceeding 1880 mm in width, with 12-15% nickel and 2-3% molybdenum. It is not in coils and not further worked than hot-rolled, falling under tariff item 7219.22.00 because its thickness is 8 mm (within 4.75-10 mm).
316Ti Stabilized Hot-Rolled Stainless Sheet 9mm
316Ti stabilized hot-rolled stainless steel sheet, 9 mm thick and 1300 mm wide, with 2.2% molybdenum and 11% nickel. This flat-rolled product is not further worked than hot-rolled and not in coils, meeting the criteria for tariff item 7219.22.00.
317 Stainless Steel Hot-Rolled Plate 1750mm Wide
Type 317 stainless steel hot-rolled plate with 3% molybdenum and 12% nickel, 6 mm thick and 1750 mm wide. This flat-rolled product is not further worked than hot-rolled and not in coils, fitting tariff item 7219.22.00 for stainless steel plates of this thickness.