AL-6XN Hot-Rolled Stainless Steel Sheet 9mm Thick
AL-6XN super-austenitic stainless steel hot-rolled plate, 9 mm thick and exceeding 1880 mm in width, with 20-22% nickel and 2.5% molybdenum. It is not further worked than hot-rolled and not in coils, falling under tariff item 7219.22.00 due to its thickness of 9 mm (within 4.75-10 mm).
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the plate thickness exceeds 10 mm
This covers hot-rolled stainless flat products of thickness over 10 mm.
If the plate thickness is less than 4.75 mm
This covers hot-rolled stainless flat products of thickness under 4.75 mm.
If the plate is cold-rolled
This covers cold-rolled stainless flat products of thickness 4.75 mm or more.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the plate is not cold-worked or surface-treated—this tariff item covers only hot-rolled products
• Provide a material test report verifying the alloy composition (Ni, Mo, Cr)
• Ensure the width is at least 600 mm and thickness is 4.75-10 mm
Related Products under Tariff item 7219.22.00
254 SMO Hot-Rolled Stainless Sheet 6.5mm Thick
254 SMO hot-rolled stainless steel sheet, 6.5 mm thick and 1450 mm wide, with high molybdenum (1.8%) and nickel (18%) content. This flat-rolled product is not further worked than hot-rolled and is not in coils, fitting tariff item 7219.22.00 for stainless steel sheets of this thickness.
316H High-Temp Hot-Rolled Stainless Plate 4.75mm
316H high-temperature grade hot-rolled stainless steel plate, minimum 4.75 mm thick and 1500 mm wide, with 2.1% molybdenum and 11% nickel. This flat-rolled product is not further worked than hot-rolled and not in coils, qualifying for tariff item 7219.22.00.
316L Hot-Rolled Stainless Steel Sheet 1650mm Width
Type 316L low-carbon variant hot-rolled stainless steel sheet, 5 mm thick and 1650 mm wide, with 2.5% molybdenum and 11% nickel. This flat-rolled product is not further worked than hot-rolled and not in coils, meeting the criteria for tariff item 7219.22.00.
316L Hot-Rolled Stainless Steel Slab 8mm Thick Wide
Type 316L low-carbon stainless steel hot-rolled plate, 8 mm thick and exceeding 1880 mm in width, with 12-15% nickel and 2-3% molybdenum. It is not in coils and not further worked than hot-rolled, falling under tariff item 7219.22.00 because its thickness is 8 mm (within 4.75-10 mm).
316Ti Stabilized Hot-Rolled Stainless Sheet 9mm
316Ti stabilized hot-rolled stainless steel sheet, 9 mm thick and 1300 mm wide, with 2.2% molybdenum and 11% nickel. This flat-rolled product is not further worked than hot-rolled and not in coils, meeting the criteria for tariff item 7219.22.00.
317 Stainless Steel Hot-Rolled Plate 1750mm Wide
Type 317 stainless steel hot-rolled plate with 3% molybdenum and 12% nickel, 6 mm thick and 1750 mm wide. This flat-rolled product is not further worked than hot-rolled and not in coils, fitting tariff item 7219.22.00 for stainless steel plates of this thickness.