Other
Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. > Not further worked than cold-rolled (cold-reduced): > Other > Other
Duty Rate (from China)
Products classified under Tariff item 7211.2
Appliance Cold-Rolled Steel Bracket Strip 1.75mm
Narrow cold-reduced non-alloy steel strip, 260 mm wide and 1.75 mm thick, with carbon content below 0.25%. It is not further worked than cold-reduction and is used for appliance mounting brackets. This product falls under tariff item 7211.23.00 as a flat-rolled non-alloy steel product, not clad, plated, or coated, with less than 0.25% carbon.
7211.23.00Cold-Reduced Low-Carbon Steel for Electrical Laminations
Cold-reduced low-carbon steel strip for electrical laminations, 250 mm wide and 0.35 mm thick, made of non-alloy steel with carbon content below 0.25%. It is not further worked than cold-rolled and has no cladding, plating or coating, providing precise gauge control for stamping motor laminations. This product falls under tariff item 7211.23.00 as a flat-rolled product of iron or non-alloy steel, width less than 600 mm.
7211.23.00Cold-Reduced Steel Banding Strap 0.75mm Thick
Cold-reduced steel banding strap, 250 mm wide and 0.75 mm thick, made of non-alloy steel with carbon content below 0.25%. It is not further worked than cold-rolled and has no cladding, plating or coating, making it suitable for packaging and securing cargo. This product is classified under tariff item 7211.23.00 as a flat-rolled product of iron or non-alloy steel, width less than 600 mm.
7211.23.00Cold-Reduced Steel Banding Strap 2mm Thick
Narrow cold-rolled non-alloy steel strip, 280 mm wide and 2 mm thick, with carbon content below 0.25%. It is not further worked than cold-rolling and is used for industrial packaging banding. This product falls under tariff item 7211.23.00 as a flat-rolled non-alloy steel product, not clad, plated, or coated, with less than 0.25% carbon.
7211.23.00Cold-Reduced Steel for Battery Casings
Thin cold-rolled low-carbon steel sheets under 600 mm wide, used for small battery enclosures and cans. They are not further worked than cold-rolled, uncoated, and non-alloy, with a carbon content below 0.25% by weight, qualifying under tariff item 7211.23.00.
7211.23.00Cold-Reduced Steel Sheet for Automotive Trim
Cold-rolled non-alloy steel sheet less than 600 mm wide, with a carbon content below 0.25% by weight, used for interior automotive trim panels. It is not clad, plated or coated, and is not further worked than cold-rolled, matching tariff item 7211.23.00.
7211.23.00Cold-Rolled Burr Tool Steel Blank
Cold-rolled burr tool steel blank, made of thin low-carbon non-alloy steel strip with carbon content below 0.25% and width less than 600 mm. It is not further worked than cold-rolled and has no cladding, plating or coating, serving as blank stock for forming rotary dental and jeweler's burrs. This product is classified under tariff item 7211.23.00 as a flat-rolled product of iron or non-alloy steel, width less than 600 mm.
7211.23.00Cold-Rolled Low Carbon Feeler Gauge Strip
Cold-rolled low carbon feeler gauge strip, made of narrow, thin non-alloy steel with carbon content below 0.25% and width less than 600 mm. It is not further worked than cold-rolled and has no cladding, plating or coating, making it suitable for manufacturing precision feeler gauges for engine building and alignment. This product falls under tariff item 7211.23.00 as a flat-rolled product of iron or non-alloy steel, width less than 600 mm.
7211.23.00Cold-Rolled Low-Carbon Steel Banding Strap
Narrow cold-rolled steel strapping under 600 mm wide, with a carbon content below 0.25% by weight, used for securing cargo pallets. It is uncoated and not further worked than cold-rolled, being a flat-rolled non-alloy steel product, qualifying under tariff item 7211.23.00.
7211.23.00Cold-Rolled Low-Carbon Steel for Lock Washer Blanks
Cold-reduced non-alloy steel strip, 250 mm wide and 1.8 mm thick, with carbon content below 0.25%. It is not further worked than cold-reduction and is supplied as blanks for stamped lock washers. This product falls under tariff item 7211.23.00 as a flat-rolled non-alloy steel product, not clad, plated, or coated, with less than 0.25% carbon.
7211.23.00Cold-Rolled Low-Carbon Steel for Lock Washer Production
Cold-rolled low-carbon steel strip for lock washer production, 250 mm wide and 1.2 mm thick, made of non-alloy steel with carbon content below 0.25%. It is not further worked than cold-rolled and has no cladding, plating or coating, serving as flat input material for punching split lock washers. This product falls under tariff item 7211.23.00 as a flat-rolled product of iron or non-alloy steel, width less than 600 mm.
7211.23.00Cold-Rolled Low-Carbon Steel Strip for Appliances
Narrow cold-rolled steel strip under 600 mm wide, with a carbon content below 0.25% by weight, not further worked beyond cold-reduction, used in manufacturing household appliances like washers and refrigerators. It is a flat-rolled non-alloy steel product, not clad, plated or coated, matching tariff item 7211.23.00.
7211.23.00Cold-Rolled Low-Carbon Steel Strip for Automotive Trim
Flat-rolled non-alloy steel strip, 250 mm wide and 1.5 mm thick, with carbon content below 0.25%. It is cold-rolled without further surface treatments and is used for automotive trim. This product falls under tariff item 7211.23.00 as a flat-rolled non-alloy steel product, not clad, plated, or coated, with less than 0.25% carbon.
7211.23.00Cold-Rolled Low-C Steel for Tool Handles
Narrow cold-rolled non-alloy steel strip under 600 mm wide, with a carbon content below 0.25% by weight, used for reinforcing hand tool handles. It is not clad, plated or coated, and is not further worked than cold-rolled, qualifying under tariff item 7211.23.00.
7211.23.00Cold-Rolled Medical Blade Steel Strip
Cold-rolled medical blade steel strip, made of thin precision low-carbon non-alloy steel with carbon content below 0.25% and width less than 600 mm. It is not further worked than cold-rolled and has no cladding, plating or coating, serving as a substrate for disposable surgical scalpel and biopsy blades. This product is classified under tariff item 7211.23.00 as a flat-rolled product of iron or non-alloy steel, width less than 600 mm.
7211.23.00Cold-Rolled Model Maker Steel Shim
Cold-rolled model maker steel shim, made of narrow non-alloy steel with carbon content below 0.25% and width less than 600 mm. It is not further worked than cold-rolled and has no cladding, plating or coating, providing precision alignment for prototype and model building. This product falls under tariff item 7211.23.00 as a flat-rolled product of iron or non-alloy steel, width less than 600 mm.
7211.23.00Cold-Rolled Narrow Electronics Shunt Strip
Precision cold-rolled low-carbon steel strip, under 0.25 mm thick and less than 300 mm wide, used for current shunt resistors in electronic circuit boards. It is a flat-rolled product of non-alloy steel, not clad, plated or coated, and not further worked than cold-rolled, with a carbon content below 0.25% by weight, meeting the definition of tariff item 7211.23.00.
7211.23.00Cold-Rolled Precision Shim Stock
Ultra-thin cold-rolled non-alloy steel sheets under 0.25 mm thick and less than 300 mm wide, used for machinery shimming and gapping. These flat-rolled products are not clad, plated or coated, and are not further worked than cold-rolled, with a carbon content below 0.25% by weight, matching tariff item 7211.23.00.
7211.23.00Cold-Rolled Razor Blade Steel Strip
Thin flat-rolled non-alloy steel strip under 0.25 mm thick and less than 300 mm wide, with low carbon content below 0.25% by weight, specifically certified for razor blade production. It is cold-rolled, not clad, plated or coated, and not further worked, qualifying under tariff item 7211.23.00.
7211.23.00Cold-Rolled Steel Narrow Strip for Spring Clips
Cold-rolled steel narrow strip for spring clips, 280 mm wide and 0.6 mm thick, made of high-precision non-alloy steel with low carbon content below 0.25%. It is not further worked than cold-rolled and has no cladding, plating or coating, making it suitable for forming spring clips in electronics. This product is classified under tariff item 7211.23.00 as a flat-rolled product of iron or non-alloy steel, width less than 600 mm.
7211.23.00Cold-Rolled Steel Strip for Office Staple Wire
Cold-rolled steel strip for office staple wire, 290 mm wide and 0.4 mm thick, made of precision low-carbon non-alloy steel with carbon content below 0.25%. It is not further worked than cold-rolled and has no cladding, plating or coating, providing high ductility for drawing into office staples. This product falls under tariff item 7211.23.00 as a flat-rolled product of iron or non-alloy steel, width less than 600 mm.
7211.23.00Cold-Rolled Stencil Steel Foil
Ultra-thin cold-rolled non-alloy steel foil under 0.25 mm thick in narrow widths, used for industrial stencil cutting and marking applications. It is not further worked than cold-rolled, with a carbon content below 0.25% by weight, and is not clad, plated or coated, fitting tariff item 7211.23.00.
7211.23.00Cold-Rolled Watch Spring Steel Blank
Thin flat-rolled non-alloy steel under 0.25 mm thick and less than 300 mm wide, cold-rolled for subsequent forming into watch balance springs and hairsprings. It has a carbon content below 0.25% by weight, is not clad, plated or coated, and is not further worked than cold-rolled, matching tariff item 7211.23.00.
7211.23.00Furniture Cold-Rolled Steel Frame Stock 2.0mm
Cold-rolled low-carbon steel strip, 285 mm wide and 2.0 mm thick, with carbon content below 0.25%. It is not further worked than cold-rolling and is used for metal furniture frames. This product falls under tariff item 7211.23.00 as a flat-rolled non-alloy steel product, not clad, plated, or coated, with less than 0.25% carbon.
7211.23.00High-Strength Cold-Rolled Steel for Agricultural Implements
Cold-rolled high-strength steel sheet, 1.7 mm thick and 292 mm wide, with a yield strength of 355 MPa and carbon content below 0.25%. It is not clad, plated, or coated and is used for plow blade supports in agricultural implements. This product falls under tariff item 7211.23.00 as a flat-rolled non-alloy steel product, not further worked than cold-rolled, with less than 0.25% carbon by weight.
7211.23.00High-Strength Cold-Rolled Steel Strip for Automotive Suspension
Cold-rolled flat-rolled steel strip, 250 mm wide and 1.5 mm thick, with a yield strength of 355 MPa and carbon content below 0.25%. It is not further worked than cold-rolling and is used for automotive suspension components. This product falls under tariff item 7211.23.00 as a flat-rolled non-alloy steel product, not clad, plated, or coated, with less than 0.25% carbon.
7211.23.00High-Strength Narrow Cold-Reduced Steel for Gym Equipment
Cold-reduced high-strength steel strip, 1.9 mm thick and 260 mm wide, with a minimum yield strength of 355 MPa and carbon content below 0.25%. It is not further worked than cold-reduction and is used for weight bench frames in gym equipment. This product falls under tariff item 7211.23.00 as a flat-rolled non-alloy steel product, not clad, plated, or coated, with less than 0.25% carbon.
7211.23.00High-Strength Steel Cold-Reduced Sheet for Bicycle Frames
Cold-reduced steel sheet, 2.0 mm thick and 280 mm wide, with a yield strength of 355 MPa and carbon content below 0.25%. It is not further worked than cold-reduction and is used in bicycle frame manufacturing. This product falls under tariff item 7211.23.00 as a flat-rolled non-alloy steel product, not clad, plated, or coated, with less than 0.25% carbon.
7211.23.00High-Strength Steel Cold Strip for Heavy Duty Shelving
Cold-rolled high-strength steel strip, 2.2 mm thick and 275 mm wide, with a minimum yield strength of 355 MPa and carbon content below 0.25%. It is not further worked than cold-rolling and is used for industrial shelving brackets. This product falls under tariff item 7211.23.00 as a flat-rolled non-alloy steel product, not clad, plated, or coated, with less than 0.25% carbon.
7211.23.00HVAC Cold-Rolled Steel Flange Stock 1.4mm
Cold-rolled low-carbon steel strip, 280 mm wide and 1.4 mm thick, with carbon content below 0.25%. It is not further worked than cold-rolling and is used for HVAC duct flanges. This product falls under tariff item 7211.23.00 as a flat-rolled non-alloy steel product, not clad, plated, or coated, with less than 0.25% carbon.
7211.23.00Industrial Cold-Rolled Steel for Gasket Blanks
Industrial cold-rolled steel for gasket blanks, 295 mm wide and 1.1 mm thick, made of low-carbon non-alloy steel with carbon content below 0.25%. It is not further worked than cold-rolled and has no cladding, plating or coating, making it suitable for blank stamping flat gaskets for machinery. This product is classified under tariff item 7211.23.00 as a flat-rolled product of iron or non-alloy steel, width less than 600 mm.
7211.23.00Industrial Cold-Rolled Steel Mounting Strip 2.2mm
Industrial cold-rolled steel mounting strip, 295 mm wide and 2.2 mm thick, made of non-alloy steel with less than 0.25% carbon by weight. It is not clad, plated or coated and has been cold-reduced only, making it suitable for equipment mounting brackets. This product falls under tariff item 7211.23.00 as a flat-rolled product of iron or non-alloy steel, width less than 600 mm, not further worked than cold-rolled.
7211.23.00Industrial High-Strength Cold Steel for Material Handling
High-strength cold-rolled steel, 2.5 mm thick and 285 mm wide, with a minimum yield strength of 355 MPa and carbon content below 0.25%. It is not further worked than cold-rolling and is used for conveyor components in material handling. This product falls under tariff item 7211.23.00 as a flat-rolled non-alloy steel product, not clad, plated, or coated, with less than 0.25% carbon.
7211.23.00Narrow Cold-Rolled Steel for Battery Terminal Shims
Narrow cold-rolled steel for battery terminal shims, 260 mm wide and 0.9 mm thick, made of cold-reduced non-alloy steel with carbon content below 0.25%. It is not further worked than cold-rolled and has no cladding, plating or coating, providing corrosion resistance from cold work for automotive applications. This product falls under tariff item 7211.23.00 as a flat-rolled product of iron or non-alloy steel, width less than 600 mm.
7211.23.00Narrow Cold-Rolled Steel for Razor Blade Blanks
Narrow cold-rolled steel for razor blade blanks, 290 mm wide and 1.0 mm thick, made of special low-carbon non-alloy steel with carbon content below 0.25%. It is not further worked than cold-rolled and has no cladding, plating or coating, serving as a substrate for razor blade production. This product is classified under tariff item 7211.23.00 as a flat-rolled product of iron or non-alloy steel, width less than 600 mm.
7211.23.00Narrow Cold-Rolled Steel Shim Stock 1.6mm
Narrow cold-rolled steel shim stock, 290 mm wide and 1.6 mm thick, made of low-carbon non-alloy steel with carbon content below 0.25%. It is not further worked than cold-rolled and has no cladding, plating or coating, making it ideal for precision machinery alignment. This product is classified under tariff item 7211.23.00 as a flat-rolled product of iron or non-alloy steel, width less than 600 mm.
7211.23.00Narrow High-Strength Cold-Rolled Steel for Appliance Chassis
High-strength cold-rolled steel strip, 1.8 mm thick and 290 mm wide, with a yield strength of 355 MPa and carbon content below 0.25%. It is not further worked than cold-rolling and is used for washing machine chassis components. This product falls under tariff item 7211.23.00 as a flat-rolled non-alloy steel product, not clad, plated, or coated, with less than 0.25% carbon.
7211.23.00Precision Cold-Rolled Steel Shim Stock 0.5mm
Precision cold-rolled steel shim stock, 280 mm wide and 0.5 mm thick, made of thin low-carbon non-alloy steel with carbon content below 0.25%. It is not further worked than cold-rolled and has no cladding, plating or coating, making it suitable for machinery alignment shims. This product falls under tariff item 7211.23.00 as a flat-rolled product of iron or non-alloy steel, width less than 600 mm.
7211.23.00Precision High-Strength Cold-Rolled Steel for Forklift Components
High-strength cold-rolled steel sheet, 1.6 mm thick and 295 mm wide, with a yield strength exceeding 355 MPa and carbon content below 0.25%. It is not further worked than cold-rolling and is used for forklift mast components. This product falls under tariff item 7211.23.00 as a flat-rolled non-alloy steel product, not clad, plated, or coated, with less than 0.25% carbon.
7211.23.00Structural High-Strength Cold Steel Narrow Strip
Narrow high-strength cold-rolled steel strip, 2.1 mm thick and 270 mm wide, with a minimum yield strength of 355 MPa and carbon content below 0.25%. It is not further worked than cold-rolling and is used for structural applications. This product falls under tariff item 7211.23.00 as a flat-rolled non-alloy steel product, not clad, plated, or coated, with less than 0.25% carbon.
7211.29.00Cold-Reduced Carbon Steel Banding Strap
> Cold-reduced carbon steel banding strap, a non-alloy steel strip under 300 mm wide and thicker than 0.25 mm, used for industrial packaging and securing cargo. It is not further worked than cold-rolled, making it a flat-rolled product of heading 72.11.
7211.29.00Cold-Reduced Steel Coil for Precision Springs
> Cold-reduced steel coil for precision springs, 38 mm wide and 0.4 mm thick, used for small mechanical springs. It is not further worked than cold-rolled, fitting tariff item 7211.29.00.
7211.29.00Cold-Reduced Steel Edge Strip for Furniture
Narrow cold-rolled nonalloy steel strip, less than 300 mm wide, for furniture edging before final forming. The product is not further worked than cold-rolled, not clad, plated or coated, and falls under tariff item 7211.29.00 as 'Other' flat-rolled products of iron or nonalloy steel, width less than 600 mm.
7211.29.00Cold-Reduced Steel for Saw Blades
> Cold-reduced high-carbon non-alloy steel strip for saw blades, under 300 mm wide and thicker than 0.25 mm, supplied uncoated and unpolished. It is not further worked than cold-rolled, fitting the scope of tariff item 7211.29.00.
7211.29.00Cold-Reduced Steel for Shelf Brackets
Cold-rolled nonalloy strip, less than 300 mm wide, for shelf bracket fabrication. The product is not further worked than cold-rolled, not clad, plated or coated, and is classified under tariff item 7211.29.00 as 'Other' flat-rolled products of iron or nonalloy steel, width less than 600 mm.
7211.29.00Cold-Reduced Steel Shim Stock 0.5 mm Thick
Precision cold-rolled nonalloy steel strip, under 300 mm width and 0.5 mm thickness, supplied in coils for shim manufacturing in machinery. The product is not further worked than cold-rolled, not clad, plated or coated, and falls under tariff item 7211.29.00 as 'Other' flat-rolled products of iron or nonalloy steel, width less than 600 mm.
7211.29.00Cold-Reduced Steel Shim Stock 0.5mm Thick
Precision cold-rolled nonalloy steel sheets used as shim stock for machinery alignment, with a width of 250 mm and thickness of 0.5 mm. The product is not further worked than cold-rolled, not clad, plated or coated, and falls under tariff item 7211.29.00 as 'Other' flat-rolled products of iron or nonalloy steel, width less than 600 mm.
7211.29.00Cold-Rolled Banding Steel Coil
> Cold-rolled banding steel coil, 50 mm wide and 0.30 mm thick, used for strapping and banding applications. It is not further worked than cold-rolled, so it falls under tariff item 7211.29.00.
7211.29.00Cold-Rolled Low Carbon Steel for Lock Washers
> Cold-rolled low-carbon non-alloy steel strip for lock washers, under 300 mm wide and over 0.25 mm thick, supplied before stamping. It is not further worked than cold-rolled, so it falls under tariff item 7211.29.00.
7211.29.00Cold-Rolled Mild Steel Strip for Automotive Trim
> Cold-rolled mild steel strip for automotive trim, under 300 mm wide and over 0.25 mm thick, used for decorative trim manufacturing. It is not further worked than cold-rolled, making it a flat-rolled product under tariff item 7211.29.00.
7211.29.00Cold-Rolled Narrow Steel Strip for Razor Blades
> Cold-rolled narrow steel strip for razor blades, 0.3 mm thick and 45 mm wide, supplied in coils. It is not further worked than cold-rolled and is non-alloy, fitting tariff item 7211.29.00.
7211.29.00Cold-Rolled Narrow Strip for Electrical Contacts
> Cold-rolled narrow strip for electrical contacts, 0.29 mm thick and 46 mm wide, used as base material before silver plating. It is not further worked than cold-rolled, so it falls under tariff item 7211.29.00.
7211.29.00Cold-Rolled Nonalloy Steel Banding Strap
Cold-reduced steel strapping, 200 mm wide and 0.4 mm thick, used for securing cargo pallets. The product is not further worked than cold-rolled, not clad, plated or coated, and is classified under tariff item 7211.29.00 as 'Other' flat-rolled products of iron or nonalloy steel, width less than 600 mm.
7211.29.00Cold-Rolled Nonalloy Steel for Clips and Brackets
> Cold-rolled non-alloy steel strip for clips and brackets, under 300 mm wide and over 0.25 mm thick, used for stamping in HVAC and other applications. It is not further worked than cold-rolled, fitting tariff item 7211.29.00.
7211.29.00Cold-Rolled Nonalloy Steel for Tool Blanks
Cold-rolled strip steel, under 300 mm wide, for machining into hand tool blanks. It is a non-alloy, flat-rolled product, not further worked than cold-reduced, and not clad, plated, or coated, distinguishing it from tool steel.
7211.29.00Cold-Rolled Nonalloy Steel Furniture Frame Stock
Narrow cold-rolled steel flats, 280 mm wide and 0.7 mm thick, for metal furniture frame fabrication. The product is not further worked than cold-rolled, not clad, plated or coated, and falls under tariff item 7211.29.00 as 'Other' flat-rolled products of iron or nonalloy steel, width less than 600 mm.
7211.29.00Cold-Rolled Nonalloy Steel Guard Rail Strip
Cold-rolled non-alloy steel strip, less than 300 mm wide, used for manufacturing safety guard rails. It is flat-rolled, not clad, plated or coated, and has not been further worked beyond cold reduction, making it classifiable under this tariff item.
7211.29.00Cold-Rolled Nonalloy Steel Mounting Strip
Thin, cold-reduced steel strip, less than 300 mm wide, intended for mounting brackets in consumer goods. It is a flat-rolled non-alloy steel product, not further worked beyond cold rolling, and not clad, plated, or coated.
7211.29.00Cold-Rolled Nonalloy Steel Strip for Automotive Trim
Flat-rolled nonalloy steel strip, cold-rolled, under 300 mm width and thickness over 0.25 mm, used for manufacturing automotive exterior trim panels. The product is not further worked than cold-rolled, not clad, plated or coated, and is classified under tariff item 7211.29.00 as 'Other' flat-rolled products of iron or nonalloy steel, width less than 600 mm.
7211.29.00Cold-Rolled Shim Stock Steel Coil
> Cold-rolled shim stock steel coil, 42 mm wide and 0.28 mm thick, used for shim stock and gaskets. It is not further worked than cold-rolled, fitting tariff item 7211.29.00.