Cold-Rolled Razor Blade Steel Strip
Thin flat-rolled non-alloy steel strip under 0.25 mm thick and less than 300 mm wide, with low carbon content below 0.25% by weight, specifically certified for razor blade production. It is cold-rolled, not clad, plated or coated, and not further worked, qualifying under tariff item 7211.23.00.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the carbon content is 0.25% or more by weight
This heading covers flat-rolled non-alloy steel products under 600 mm wide, not further worked than cold-rolled, with higher carbon content.
If the strip is clad, plated or coated
This heading covers flat-rolled non-alloy steel products under 600 mm wide that have been clad, plated or coated.
If the strip is cut into razor blades
Razors and razor blades are classified in this heading, not as flat-rolled steel products.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the strip is under 600 mm wide and has a carbon content below 0.25% by weight to meet the tariff item conditions
• Provide a certificate of analysis showing the steel is non-alloy and uncoated
• Check if the strip is considered a 'part of general use' under Section Note 2, which could affect classification
Related Products under Tariff item 7211.23.00
Appliance Cold-Rolled Steel Bracket Strip 1.75mm
Narrow cold-reduced non-alloy steel strip, 260 mm wide and 1.75 mm thick, with carbon content below 0.25%. It is not further worked than cold-reduction and is used for appliance mounting brackets. This product falls under tariff item 7211.23.00 as a flat-rolled non-alloy steel product, not clad, plated, or coated, with less than 0.25% carbon.
Cold-Reduced Low-Carbon Steel for Electrical Laminations
Cold-reduced low-carbon steel strip for electrical laminations, 250 mm wide and 0.35 mm thick, made of non-alloy steel with carbon content below 0.25%. It is not further worked than cold-rolled and has no cladding, plating or coating, providing precise gauge control for stamping motor laminations. This product falls under tariff item 7211.23.00 as a flat-rolled product of iron or non-alloy steel, width less than 600 mm.
Cold-Reduced Steel Banding Strap 0.75mm Thick
Cold-reduced steel banding strap, 250 mm wide and 0.75 mm thick, made of non-alloy steel with carbon content below 0.25%. It is not further worked than cold-rolled and has no cladding, plating or coating, making it suitable for packaging and securing cargo. This product is classified under tariff item 7211.23.00 as a flat-rolled product of iron or non-alloy steel, width less than 600 mm.
Cold-Reduced Steel Banding Strap 2mm Thick
Narrow cold-rolled non-alloy steel strip, 280 mm wide and 2 mm thick, with carbon content below 0.25%. It is not further worked than cold-rolling and is used for industrial packaging banding. This product falls under tariff item 7211.23.00 as a flat-rolled non-alloy steel product, not clad, plated, or coated, with less than 0.25% carbon.
Cold-Reduced Steel for Battery Casings
Thin cold-rolled low-carbon steel sheets under 600 mm wide, used for small battery enclosures and cans. They are not further worked than cold-rolled, uncoated, and non-alloy, with a carbon content below 0.25% by weight, qualifying under tariff item 7211.23.00.
Cold-Reduced Steel Sheet for Automotive Trim
Cold-rolled non-alloy steel sheet less than 600 mm wide, with a carbon content below 0.25% by weight, used for interior automotive trim panels. It is not clad, plated or coated, and is not further worked than cold-rolled, matching tariff item 7211.23.00.