Other
Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. > Not further worked than cold-rolled (cold-reduced): > Other > Other
Duty Rate (from China)
Subheadings
Products classified under Tariff item 7211.29.00
Cold-Reduced Carbon Steel Banding Strap
> Cold-reduced carbon steel banding strap, a non-alloy steel strip under 300 mm wide and thicker than 0.25 mm, used for industrial packaging and securing cargo. It is not further worked than cold-rolled, making it a flat-rolled product of heading 72.11.
Cold-Reduced Steel Coil for Precision Springs
> Cold-reduced steel coil for precision springs, 38 mm wide and 0.4 mm thick, used for small mechanical springs. It is not further worked than cold-rolled, fitting tariff item 7211.29.00.
Cold-Reduced Steel Edge Strip for Furniture
Narrow cold-rolled nonalloy steel strip, less than 300 mm wide, for furniture edging before final forming. The product is not further worked than cold-rolled, not clad, plated or coated, and falls under tariff item 7211.29.00 as 'Other' flat-rolled products of iron or nonalloy steel, width less than 600 mm.
Cold-Reduced Steel for Saw Blades
> Cold-reduced high-carbon non-alloy steel strip for saw blades, under 300 mm wide and thicker than 0.25 mm, supplied uncoated and unpolished. It is not further worked than cold-rolled, fitting the scope of tariff item 7211.29.00.
Cold-Reduced Steel for Shelf Brackets
Cold-rolled nonalloy strip, less than 300 mm wide, for shelf bracket fabrication. The product is not further worked than cold-rolled, not clad, plated or coated, and is classified under tariff item 7211.29.00 as 'Other' flat-rolled products of iron or nonalloy steel, width less than 600 mm.
Cold-Reduced Steel Shim Stock 0.5 mm Thick
Precision cold-rolled nonalloy steel strip, under 300 mm width and 0.5 mm thickness, supplied in coils for shim manufacturing in machinery. The product is not further worked than cold-rolled, not clad, plated or coated, and falls under tariff item 7211.29.00 as 'Other' flat-rolled products of iron or nonalloy steel, width less than 600 mm.
Cold-Reduced Steel Shim Stock 0.5mm Thick
Precision cold-rolled nonalloy steel sheets used as shim stock for machinery alignment, with a width of 250 mm and thickness of 0.5 mm. The product is not further worked than cold-rolled, not clad, plated or coated, and falls under tariff item 7211.29.00 as 'Other' flat-rolled products of iron or nonalloy steel, width less than 600 mm.
Cold-Rolled Banding Steel Coil
> Cold-rolled banding steel coil, 50 mm wide and 0.30 mm thick, used for strapping and banding applications. It is not further worked than cold-rolled, so it falls under tariff item 7211.29.00.
Cold-Rolled Low Carbon Steel for Lock Washers
> Cold-rolled low-carbon non-alloy steel strip for lock washers, under 300 mm wide and over 0.25 mm thick, supplied before stamping. It is not further worked than cold-rolled, so it falls under tariff item 7211.29.00.
Cold-Rolled Mild Steel Strip for Automotive Trim
> Cold-rolled mild steel strip for automotive trim, under 300 mm wide and over 0.25 mm thick, used for decorative trim manufacturing. It is not further worked than cold-rolled, making it a flat-rolled product under tariff item 7211.29.00.
Cold-Rolled Narrow Steel Strip for Razor Blades
> Cold-rolled narrow steel strip for razor blades, 0.3 mm thick and 45 mm wide, supplied in coils. It is not further worked than cold-rolled and is non-alloy, fitting tariff item 7211.29.00.
Cold-Rolled Narrow Strip for Electrical Contacts
> Cold-rolled narrow strip for electrical contacts, 0.29 mm thick and 46 mm wide, used as base material before silver plating. It is not further worked than cold-rolled, so it falls under tariff item 7211.29.00.
Cold-Rolled Nonalloy Steel Banding Strap
Cold-reduced steel strapping, 200 mm wide and 0.4 mm thick, used for securing cargo pallets. The product is not further worked than cold-rolled, not clad, plated or coated, and is classified under tariff item 7211.29.00 as 'Other' flat-rolled products of iron or nonalloy steel, width less than 600 mm.
Cold-Rolled Nonalloy Steel for Clips and Brackets
> Cold-rolled non-alloy steel strip for clips and brackets, under 300 mm wide and over 0.25 mm thick, used for stamping in HVAC and other applications. It is not further worked than cold-rolled, fitting tariff item 7211.29.00.
Cold-Rolled Nonalloy Steel for Tool Blanks
Cold-rolled strip steel, under 300 mm wide, for machining into hand tool blanks. It is a non-alloy, flat-rolled product, not further worked than cold-reduced, and not clad, plated, or coated, distinguishing it from tool steel.
Cold-Rolled Nonalloy Steel Furniture Frame Stock
Narrow cold-rolled steel flats, 280 mm wide and 0.7 mm thick, for metal furniture frame fabrication. The product is not further worked than cold-rolled, not clad, plated or coated, and falls under tariff item 7211.29.00 as 'Other' flat-rolled products of iron or nonalloy steel, width less than 600 mm.
Cold-Rolled Nonalloy Steel Guard Rail Strip
Cold-rolled non-alloy steel strip, less than 300 mm wide, used for manufacturing safety guard rails. It is flat-rolled, not clad, plated or coated, and has not been further worked beyond cold reduction, making it classifiable under this tariff item.
Cold-Rolled Nonalloy Steel Mounting Strip
Thin, cold-reduced steel strip, less than 300 mm wide, intended for mounting brackets in consumer goods. It is a flat-rolled non-alloy steel product, not further worked beyond cold rolling, and not clad, plated, or coated.
Cold-Rolled Nonalloy Steel Strip for Automotive Trim
Flat-rolled nonalloy steel strip, cold-rolled, under 300 mm width and thickness over 0.25 mm, used for manufacturing automotive exterior trim panels. The product is not further worked than cold-rolled, not clad, plated or coated, and is classified under tariff item 7211.29.00 as 'Other' flat-rolled products of iron or nonalloy steel, width less than 600 mm.
Cold-Rolled Shim Stock Steel Coil
> Cold-rolled shim stock steel coil, 42 mm wide and 0.28 mm thick, used for shim stock and gaskets. It is not further worked than cold-rolled, fitting tariff item 7211.29.00.
Cold-Rolled Steel Edging Strip
> Cold-rolled steel edging strip, under 300 mm wide and over 0.25 mm thick, used for protective edging on furniture and machinery. It is not further worked than cold-rolled, so it falls under tariff item 7211.29.00.
Cold-Rolled Steel Electrical Box Blanks
Cold-reduced nonalloy steel sheets, 295 mm wide and 0.5 mm thick, for stamping electrical outlet boxes. The product is not further worked than cold-rolled, not clad, plated or coated, and falls under tariff item 7211.29.00 as 'Other' flat-rolled products of iron or nonalloy steel, width less than 600 mm.
Cold-Rolled Steel for HVAC Duct Flanges
Cold-reduced nonalloy steel flats, 290 mm wide and 0.6 mm thick, for HVAC duct connector flanges. The product is not further worked than cold-rolled, not clad, plated or coated, and is classified under tariff item 7211.29.00 as 'Other' flat-rolled products of iron or nonalloy steel, width less than 600 mm.
Cold-Rolled Steel for Lock Washer Blanks
Cold-reduced steel strip, 260 mm wide and 0.38 mm thick, blanked into lock washer shapes. The product is not further worked than cold-rolled, not clad, plated or coated, and falls under tariff item 7211.29.00 as 'Other' flat-rolled products of iron or nonalloy steel, width less than 600 mm.
Cold-Rolled Steel Strip for HVAC Duct Flanges
Cold-rolled non-alloy steel flat strip, less than 300 mm wide, for HVAC duct connectors and flanges. It is not clad, plated, coated, or further worked beyond cold reduction, and does not qualify as specialty steel.
Narrow Cold-Reduced Steel for Clips and Fasteners
> Narrow cold-reduced steel for clips and fasteners, 0.32 mm thick and 49 mm wide, used for progressive die stamping. It is not further worked than cold-rolled, so it falls under tariff item 7211.29.00.
Narrow Cold-Rolled Spring Steel Strip
> Narrow cold-rolled spring steel strip, under 300 mm wide and over 0.25 mm thick, used for flat springs and clips. It is not further worked than cold-rolled, making it a flat-rolled product under tariff item 7211.29.00.
Narrow Cold-Rolled Steel Channel Liner
Cold-rolled flat strip, under 300 mm wide, for machinery channel liners. It is a non-alloy, cold-reduced product, not further worked, and not clad, plated, or coated, and does not qualify as razor or specialty steel.
Narrow Cold-Rolled Steel for Appliance Housings
Cold-rolled nonalloy steel coil stock, 280 mm wide and 0.8 mm thick, for forming refrigerator and washer exterior panels. The product is not further worked than cold-rolled, not clad, plated or coated, and is classified under tariff item 7211.29.00 as 'Other' flat-rolled products of iron or nonalloy steel, width less than 600 mm.
Narrow Cold-Rolled Steel for Appliance Panels
Cold-rolled flat non-alloy steel strip, less than 300 mm wide, for fabricating panels in household appliances like washers. It is not further worked, not clad, plated, or coated, and is classified as 'other' cold-reduced flat-rolled product.
Narrow Cold-Rolled Steel for Electrical Boxes
Cold-rolled flat non-alloy steel strip, under 300 mm wide, for stamping electrical junction boxes. It is classifiable as 'other' cold-rolled flat-rolled product, with no further working or coating, and is standard non-alloy steel per Chapter 72 notes.
Narrow Cold-Rolled Steel for Saw Blades
Narrow cold-rolled nonalloy steel strip, 48 mm wide and 0.35 mm thick, supplied in coils and used as backing material for circular saw blades. It is not further worked than cold-rolled, not clad, plated or coated, and falls under tariff item 7211.29.00 as 'Other' flat-rolled products of iron or nonalloy steel, width less than 600 mm.
Narrow Cold-Rolled Steel Shim Stock
> Narrow cold-rolled steel shim stock, under 300 mm wide and over 0.25 mm thick, sold in coils for machinery alignment shims. It is not further worked than cold-rolled, fitting tariff item 7211.29.00.
Narrow Gauge Cold-Rolled Steel Battery Plates
Cold-rolled nonalloy steel strip, 240 mm wide and 0.45 mm thick, for lead-acid battery grid stock. The product is not further worked than cold-rolled, not clad, plated or coated, and falls under tariff item 7211.29.00 as 'Other' flat-rolled products of iron or nonalloy steel, width less than 600 mm.
Narrow Gauge Cold-Rolled Steel for Battery Casings
Thin, cold-reduced non-alloy steel strip, less than 300 mm wide, for small battery enclosures in electronics. It is a flat-rolled product, not further worked, not clad, plated, or coated, and is not high-strength or specialty steel.
Precision Cold-Reduced Steel for Gaskets
> Precision cold-reduced steel for gaskets, under 300 mm wide and over 0.25 mm thick, used for gasket blanking. It is not further worked than cold-rolled, so it falls under tariff item 7211.29.00.
Precision Cold-Reduced Steel for Lock Components
Thin, cold-rolled non-alloy steel strip, under 300 mm wide, for stamping lock washers and springs. It is a cold-reduced flat product, not further worked, and not clad, plated, or coated, and excludes heat-resistant or specialty steels.
Precision Cold-Rolled Steel for Gear Blanks
Narrow, cold-rolled non-alloy steel strip, less than 300 mm wide, for gear stamping and machining. It is a cold-reduced flat product, classified as 'other', not coated or further worked, and excludes ball-bearing steel composition.
Precision Cold-Rolled Steel for Razor Blade Stock
High-precision cold-rolled nonalloy steel strip, 250 mm wide and 0.35 mm thick, certified for razor blade blanking. Although the end-use resembles razor blade steel, the non-stainless composition places it under tariff item 7211.29.00 as 'Other' flat-rolled products of iron or nonalloy steel, width less than 600 mm, not further worked than cold-rolled.
Precision Cold-Rolled Steel for Reed Valves
Ultra-flat cold-rolled nonalloy steel strip, 40 mm wide and 0.27 mm thick, in coils for manufacturing reed valves in compressors. The product is not further worked than cold-rolled, not clad, plated or coated, and is classified under tariff item 7211.29.00 as 'Other' flat-rolled products of iron or nonalloy steel, width less than 600 mm.