Chapter 7211 — Customs Tariff Headings

A36 Universal Mill Plate

Hot-rolled A36 structural steel universal mill plate, measuring 500 mm wide by 10 mm thick, produced on four faces or in a closed box pass without patterns in relief. It falls under tariff item 7211.13.00 as a flat-rolled product of non-alloy steel, of a width of less than 600 mm, not further worked than hot-rolled, and not clad, plated or coated.

ASTM A283 Grade C Universal Mill Plate

Low-carbon ASTM A283 Grade C universal mill plate, hot-rolled to 8 mm thickness and 450 mm width, not in coils and without relief patterns. It is a flat-rolled product of non-alloy steel, width less than 600 mm, not further worked than hot-rolled, and not clad, plated or coated, fitting tariff item 7211.13.00.

ASTM A36 6mm Universal Mill Plate

6 mm thick ASTM A36 universal mill plate of non-alloy steel, 400 mm width, hot-rolled on four faces, not in coils. It is a flat-rolled product of non-alloy steel, width less than 600 mm, not further worked than hot-rolled, and without patterns in relief, qualifying for tariff item 7211.13.00.

ASTM A570 Grade 36 Universal Mill Plate

Hot-rolled ASTM A570 Grade 36 universal mill plate, 450 mm wide x 5 mm thick, four-face rolled, not coiled. It is a flat-rolled product of non-alloy steel, width less than 600 mm, not further worked than hot-rolled, and without patterns in relief, fitting tariff item 7211.13.00.

EN S235JR Universal Mill Plate

S235JR structural universal mill plate per EN 10025, hot-rolled 15 mm thick x 520 mm wide, non-alloy, no patterns. It is a flat-rolled product of non-alloy steel, width less than 600 mm, not further worked than hot-rolled, and not clad, plated or coated, qualifying for tariff item 7211.13.00.

S275JR Universal Mill Plate

EN 10025 S275JR universal mill plate, hot-rolled non-alloy steel, 12 mm thick by 550 mm wide, produced without coils or patterns. It is a flat-rolled product of non-alloy steel, width less than 600 mm, not further worked than hot-rolled, and without patterns in relief, fitting tariff item 7211.13.00.

SS400 Universal Mill Plate

JIS G3101 SS400 hot-rolled universal mill plate, 10 mm x 580 mm, non-alloy steel without relief patterns or coatings. It is a flat-rolled product of non-alloy steel, width less than 600 mm, not further worked than hot-rolled, and not clad, plated or coated, qualifying for tariff item 7211.13.00.

AH36 High-Strength Structural Steel Sheet 5mm Thick

Hot-rolled flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated, not further worked than hot-rolled, of a thickness of 4.75 mm or more. This high-strength steel sheet is used for shipbuilding and structural applications.

Carbon Steel Flat Bar Hot-Rolled 7mm x 520mm

Hot-rolled flat bar of carbon (non-alloy) steel, 7 mm thick and 520 mm wide, not in coils and free from cladding or further processing. It is used in general fabrication and construction. This product is classified under tariff item 7211.14.00 as a flat-rolled product of iron or non-alloy steel, of a width less than 600 mm, not further worked than hot-rolled, and of a thickness of 4.75 mm or more.

Carbon Steel Hot Band 8mm x 400mm

Flat-rolled carbon steel hot band, 8 mm thickness and 400 mm width, hot-rolled only without additional processing, not plated or coated. It is used in construction and manufacturing. This product falls under tariff item 7211.14.00 as a flat-rolled product of iron or non-alloy steel, of a width less than 600 mm, not further worked than hot-rolled, and of a thickness of 4.75 mm or more.

Construction Hot-Rolled Steel Flitch 4.8mm x 500mm

Hot-rolled non-alloy steel flitch for construction reinforcement base, exactly 4.8 mm thick (just over 4.75 mm threshold) and 500 mm wide, with no coatings. It is supplied flat and not further worked. This product is classified under tariff item 7211.14.00 as a flat-rolled product of iron or non-alloy steel, of a width less than 600 mm, not further worked than hot-rolled, and of a thickness of 4.75 mm or more.

High-Strength Steel Blank 9mm x 200mm for Machining

Hot-rolled flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated, not further worked than hot-rolled, of a thickness of 4.75 mm or more. These blanks are supplied rough for machining into parts.

High-Strength Steel for Crane Boom Fabrication 5.5mm Thick

High-strength steel plate, 5.5 mm thick and 590 mm wide, hot-rolled from non-alloy steel with a minimum yield strength of 355 MPa. It is supplied in as-rolled condition without cladding, plating, or coating, and is intended for crane boom fabrication. This product falls under tariff item 7211.14.00 as a flat-rolled product of iron or non-alloy steel, of a width less than 600 mm, not further worked than hot-rolled, and of a thickness of 4.75 mm or more.

High-Strength Steel Sheet for Pressure Vessels 4.8mm Thick

Hot-rolled high-strength steel sheet, 4.8 mm thick and 500 mm wide, made of non-alloy steel with a minimum yield strength of 355 MPa. It is intended for pressure vessel fabrication and is supplied without coatings, cladding, or further working. This product is classified under tariff item 7211.14.00 as a flat-rolled product of iron or non-alloy steel, width less than 600 mm, not further worked than hot-rolled, and thickness of 4.75 mm or more.

High-Strength Steel Strip 6mm Thick 450mm Wide

Hot-rolled high-strength steel strip, 6 mm thick and 450 mm wide, with a yield strength exceeding 355 MPa. It is made of non-alloy steel, not further worked than hot-rolling, and free from cladding, plating, or coating. This product falls under tariff item 7211.14.00 as a flat-rolled product of iron or non-alloy steel, of a width less than 600 mm, not further worked than hot-rolled, and of a thickness of 4.75 mm or more.

Hot-Rolled Agricultural Machinery Steel Blank 9mm Thick

Hot-rolled flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated, not further worked than hot-rolled, of a thickness of 4.75 mm or more. These blanks are used for agricultural machinery parts such as plow shares and harrow components.

Hot-Rolled Automotive Press Blank Steel 5.5mm Thick

Hot-Rolled Carbon Steel Strip 6mm Thick

Hot-rolled flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated, not further worked than hot-rolled, of a thickness of 4.75 mm or more. This strip is produced via hot-rolling without further surface treatments.

Hot-Rolled Construction Shoring Steel Plate Strip 12mm Thick

Hot-rolled flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated, not further worked than hot-rolled, of a thickness of 4.75 mm or more. This strip is used for temporary shoring in construction.

Hot-Rolled Heat Exchanger Baffle Strip 6.5mm Thick

Hot-Rolled High-Strength Steel Band 7mm x 580mm

High-strength steel band, 7 mm thick and 580 mm wide, supplied in straight lengths and hot-rolled only. It is made of non-alloy steel with a yield strength of 355 MPa or more, and is used for strapping and reinforcement. This product is classified under tariff item 7211.14.00 as a flat-rolled product of iron or non-alloy steel, of a width less than 600 mm, not further worked than hot-rolled, and of a thickness of 4.75 mm or more.

Hot-Rolled Low Carbon Steel Pickling Line Strip 5mm Thick

Hot-Rolled Mild Steel Banding Strap 8mm Thick

Hot-rolled flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated, not further worked than hot-rolled, of a thickness of 4.75 mm or more. This strap is used for cargo securing and industrial packaging.

Hot-Rolled Mild Steel Slab 6mm Thick 450mm Wide

Mild steel flat-rolled product, hot-rolled to 6 mm thickness and 450 mm width, supplied not further worked, without cladding or coatings. It is used in general fabrication and construction. This product falls under tariff item 7211.14.00 as a flat-rolled product of iron or non-alloy steel, of a width less than 600 mm, not further worked than hot-rolled, and of a thickness of 4.75 mm or more.

Hot-Rolled Mild Steel Slab 8mm Thick 550mm Wide

Mild steel flat-rolled product, hot-rolled to 8 mm thickness and 550 mm width, supplied flat and not in coils. It is free of further working, cladding, or coatings, and is used in general engineering applications. This product falls under tariff item 7211.14.00 as a flat-rolled product of iron or non-alloy steel, of a width less than 600 mm, not further worked than hot-rolled, and of a thickness of 4.75 mm or more.

Hot-Rolled Nonalloy Steel Tool Blank Strip 10mm Thick

Hot-Rolled Shipbuilding Grade Steel Band 7mm Thick

Hot-Rolled Steel Plate 10mm Thick 500mm Wide

Hot-rolled steel plate, 10 mm thick and 500 mm wide, made of non-alloy steel without surface treatments such as coating or cladding. It is supplied flat and not in coils, suitable for structural and general fabrication. This product is classified under tariff item 7211.14.00 as a flat-rolled product of iron or non-alloy steel, of a width less than 600 mm, not further worked than hot-rolled, and of a thickness of 4.75 mm or more.

Hot-Rolled Steel Press Brake Shim Stock 4.8mm Thick

Hot-Rolled Steel Sheet 4.8mm Thick 300mm Wide

Non-alloy steel sheet, hot-rolled to 4.8 mm thickness and 300 mm width, supplied flat and not coiled, without coatings or further working. It is used in light fabrication and manufacturing. This product falls under tariff item 7211.14.00 as a flat-rolled product of iron or non-alloy steel, of a width less than 600 mm, not further worked than hot-rolled, and of a thickness of 4.75 mm or more.

HRPO Steel Blank 6mm x 450mm

Hot-rolled steel blank of non-alloy steel, 6 mm thick and 450 mm wide, not in coil form and without cladding, plating, or coatings. It is intended for further machining or fabrication. This product is classified under tariff item 7211.14.00 as a flat-rolled product of iron or non-alloy steel, of a width less than 600 mm, not further worked than hot-rolled, and of a thickness of 4.75 mm or more.

HRPO Steel Sheet 5mm Thick 550mm Wide

Hot-rolled pickled and oiled (HRPO) non-alloy steel sheet, 5 mm thick and 550 mm wide. The pickling and oiling are minimal surface treatments that do not constitute further working, so it remains a flat-rolled product of iron or non-alloy steel, not clad, plated or coated, of a width less than 600 mm and a thickness of 4.75 mm or more.

Industrial Hot-Rolled Steel Blank 7mm Thick 300mm Wide

Industrial hot-rolled steel blanks, 7 mm thick and 300 mm wide, made of non-alloy steel with no cladding or coatings. These blanks are flat-rolled products of iron or non-alloy steel, of a width less than 600 mm, not further worked than hot-rolled, and have a thickness of 4.75 mm or more.

Industrial Hot-Rolled Steel Panel 12mm x 580mm

Heavy-duty hot-rolled panel of non-alloy steel for industrial fabrication, 12 mm thick by 580 mm wide, supplied flat without coils or surface treatments. It is used in heavy machinery and structural applications. This product falls under tariff item 7211.14.00 as a flat-rolled product of iron or non-alloy steel, of a width less than 600 mm, not further worked than hot-rolled, and of a thickness of 4.75 mm or more.

Nonalloy Steel Hot Band 5.5mm x 400mm

Flat hot-rolled band of non-alloy steel, 5.5 mm thick by 400 mm wide, not coiled and without plating, cladding, or surface treatments beyond hot-rolling. It is used in general metalworking. This product is classified under tariff item 7211.14.00 as a flat-rolled product of iron or non-alloy steel, of a width less than 600 mm, not further worked than hot-rolled, and of a thickness of 4.75 mm or more.

S355 High-Strength Steel Flat 8mm x 400mm

S355 structural grade high-strength steel flat-rolled product, hot-rolled to 8 mm thickness and 400 mm width. It is made of non-alloy steel with a minimum yield strength of 355 MPa, supplied as-rolled without cladding or plating. This product falls under tariff item 7211.14.00 as a flat-rolled product of iron or non-alloy steel, of a width less than 600 mm, not further worked than hot-rolled, and of a thickness of 4.75 mm or more.

Shipbuilding Steel Plate 9mm x 580mm Hot-Rolled

Non-alloy hot-rolled steel plate for shipbuilding, 9 mm thick and 580 mm wide, supplied as-rolled without further treatments. This is a flat-rolled product of iron or non-alloy steel, of a width less than 600 mm, not further worked than hot-rolled, and has a thickness of 4.75 mm or more.

Fabrication Hot-Rolled Steel Panel Strip 195mm Wide

Hot-rolled steel strip, 195 mm wide, for metal panel fabrication, made of non-alloy steel and not clad. It is a flat-rolled product of iron or non-alloy steel, under 600 mm in width, not further worked than hot-rolling and without any cladding, plating or coating.

High-Strength Hot-Rolled Steel for Agricultural Equipment Frames

High-strength hot-rolled steel sheets, less than 300 mm wide and 2.5 mm thick, with a minimum yield strength of 275 MPa, used for structural frames in agricultural equipment. These are flat-rolled products of non-alloy steel, not further worked than hot-rolling, and not clad, plated or coated, falling under tariff item 7211.19.00 as 'Other'.

High-Strength Hot-Rolled Steel for Heavy Duty Shelving Posts

High-strength hot-rolled steel, under 300 mm wide and 2.8 mm thick, with a yield strength of 280 MPa, used for industrial shelving uprights. This is a flat-rolled non-alloy steel product, not further worked than hot-rolling, and not clad, plated or coated, classified under tariff item 7211.19.00 as 'Other'.

High-Strength Hot-Rolled Steel Shim Stock

Precision narrow high-strength steel, less than 300 mm wide and 1.8 mm thick, with a yield strength of 290 MPa, hot-rolled for machinery shimming and alignment. This is a flat-rolled non-alloy steel product, not further worked than hot-rolling, and not clad, plated or coated, falling under tariff item 7211.19.00 as 'Other'.

High-Strength Hot-Rolled Steel Strip for Automotive Suspension

High-strength hot-rolled steel strip, less than 300 mm wide and under 3 mm thick, with a minimum yield point of 275 MPa, used for automotive suspension components. This is a flat-rolled non-alloy steel product, not further worked than hot-rolling, and not clad, plated or coated, classified under tariff item 7211.19.00 as 'Other'.

High-Strength Steel Band 2.2mm x 300mm

Narrow hot-rolled band of high-strength steel (<3mm thick, ≥275 MPa yield), 300mm wide, not further worked, used for strapping in industrial packaging. It is a flat-rolled product of non-alloy steel, under 600 mm in width, not further worked than hot-rolling and without any cladding, plating or coating.

High-Strength Steel Banding for Heavy Cargo Securing

High-strength hot-rolled steel flat products, under 300 mm wide and less than 3 mm thick, with a yield strength of at least 275 MPa, used for industrial strapping. This is a flat-rolled non-alloy steel product, not further worked than hot-rolling, and not clad, plated or coated, falling under tariff item 7211.19.00 as 'Other'.

High-Strength Steel Flat 1.8mm x 500mm

Hot-rolled flat product of high-strength non-alloy steel, 1.8mm thickness with 275 MPa minimum yield, 500mm width under 600mm, no cladding or plating. It is a flat-rolled product of iron or non-alloy steel, under 600 mm in width, not further worked than hot-rolling and without any cladding, plating or coating.

High-Strength Steel Flat for Mining Equipment Reinforcement

Narrow hot-rolled high-strength steel flats, less than 300 mm wide and 2.2 mm thick, with a minimum yield of 275 MPa, used for reinforcing mining drill rig components. This is a flat-rolled non-alloy steel product, not further worked than hot-rolling, and not clad, plated or coated, classified under tariff item 7211.19.00 as 'Other'.

High-Strength Steel for Wind Turbine Tower Bracing

Hot-rolled high-strength steel flats, under 300 mm wide and 2.9 mm thick, with a yield strength of 355 MPa, used in wind turbine structural bracing. This is a flat-rolled non-alloy steel product, not further worked than hot-rolling, and not clad, plated or coated, classified under tariff item 7211.19.00 as 'Other'.

High-Strength Steel Hot-Rolled Blank 2.9mm x 580mm

High-strength steel hot-rolled blank, 2.9mm thick and 580mm wide, cut from strip and supplied flat without further processing. Its yield strength of at least 275 MPa qualifies it as high-strength non-alloy steel under Chapter 72.

High-Strength Steel Hot-Rolled Sheet 2.8mm x 550mm

Hot-rolled sheet of high-strength non-alloy steel, 2.8mm thick and 550mm wide, supplied flat without coils or further working. The yield strength of at least 275 MPa and width under 600mm place it in this tariff item.

High-Strength Steel Hot-Rolled Slit Coil Cut Flat 2.5mm x 450mm

Slit and cut-to-length from hot-rolled coil, this high-strength steel strip is 2.5mm thick and 450mm wide, presented flat rather than in coils. With a yield strength of at least 275 MPa and no further working, it fits this tariff item.

High-Strength Steel Hot-Rolled Strip 1.5mm x 400mm

Flat-rolled hot-rolled strip of non-alloy high-strength steel, 1.5mm thick and 400mm wide, with a minimum yield point of 275 MPa. It is not further worked beyond hot-rolling and is not clad or coated.

High-Strength Steel Narrow Hot-Rolled Strip 1.2mm x 200mm

Narrow high-strength steel hot-rolled strip, 1.2mm thick and 200mm wide, with a minimum yield point of 275 MPa. It is not clad or coated and has not been further worked beyond hot-rolling.

High-Strength Steel Slit Strip for Construction Scaffolding

Hot-rolled high-strength steel slit into widths under 300 mm, less than 3 mm thick, with a yield point of 275 MPa minimum, used for scaffolding braces. This is a flat-rolled non-alloy steel product, not further worked than hot-rolling, and not clad, plated or coated, falling under tariff item 7211.19.00 as 'Other'.

Hot-Rolled Black Steel Strip 200mm Wide

Black hot-rolled non-alloy steel strip, 200 mm wide, retaining mill scale and not further processed. It is a flat-rolled product of iron or non-alloy steel, under 600 mm in width, not further worked than hot-rolling and without any cladding, plating or coating.

Hot-Rolled Carbon Steel Banding Strap

Heavy-duty hot-rolled non-alloy steel strip, 25-50 mm wide and 2-4 mm thick, used for securing cargo pallets and heavy machinery. This is a flat-rolled product of iron or non-alloy steel, not further worked than hot-rolling, and not clad, plated or coated, falling under tariff item 7211.19.00 as 'Other'.

Hot-Rolled Low Carbon Steel Ribbon 240mm Wide

Thin low-carbon non-alloy steel ribbon, hot-rolled to 240 mm width for binding applications. It is a flat-rolled product of iron or non-alloy steel, under 600 mm in width, not further worked than hot-rolling and without any cladding, plating or coating.