Cold-Rolled Low Carbon Steel for Lock Washers
> Cold-rolled low-carbon non-alloy steel strip for lock washers, under 300 mm wide and over 0.25 mm thick, supplied before stamping. It is not further worked than cold-rolled, so it falls under tariff item 7211.29.00.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
PGA flags (1)Show detailsHide detailsGACSteelRequired
- GAC
Steel · Required
Global Affairs Canada: GAC Steel (Carbon Steel) requires review / declaration data. CBSA's Single Window matching criteria match this classification number (Within Range 7206000000–7217999999).
CBSA Single Window matching criteria, unknown
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the strip is coated or plated
Coated or plated products are classified under 7211.90.00.
If the washers are already stamped and finished
Finished lock washers are articles of iron or steel, not flat-rolled products.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• > Verify the product is not further worked (e.g
• not stamped or cut) at import time
• Ensure the width is under 600 mm and thickness exceeds 0.25 mm
• Keep records of the steel's chemical composition for CBSA verification
Related Products under Tariff item 7211.29.00
Cold-Reduced Carbon Steel Banding Strap
> Cold-reduced carbon steel banding strap, a non-alloy steel strip under 300 mm wide and thicker than 0.25 mm, used for industrial packaging and securing cargo. It is not further worked than cold-rolled, making it a flat-rolled product of heading 72.11.
Cold-Reduced Steel Coil for Precision Springs
> Cold-reduced steel coil for precision springs, 38 mm wide and 0.4 mm thick, used for small mechanical springs. It is not further worked than cold-rolled, fitting tariff item 7211.29.00.
Cold-Reduced Steel Edge Strip for Furniture
Narrow cold-rolled nonalloy steel strip, less than 300 mm wide, for furniture edging before final forming. The product is not further worked than cold-rolled, not clad, plated or coated, and falls under tariff item 7211.29.00 as 'Other' flat-rolled products of iron or nonalloy steel, width less than 600 mm.
Cold-Reduced Steel for Saw Blades
> Cold-reduced high-carbon non-alloy steel strip for saw blades, under 300 mm wide and thicker than 0.25 mm, supplied uncoated and unpolished. It is not further worked than cold-rolled, fitting the scope of tariff item 7211.29.00.
Cold-Reduced Steel for Shelf Brackets
Cold-rolled nonalloy strip, less than 300 mm wide, for shelf bracket fabrication. The product is not further worked than cold-rolled, not clad, plated or coated, and is classified under tariff item 7211.29.00 as 'Other' flat-rolled products of iron or nonalloy steel, width less than 600 mm.
Cold-Reduced Steel Shim Stock 0.5 mm Thick
Precision cold-rolled nonalloy steel strip, under 300 mm width and 0.5 mm thickness, supplied in coils for shim manufacturing in machinery. The product is not further worked than cold-rolled, not clad, plated or coated, and falls under tariff item 7211.29.00 as 'Other' flat-rolled products of iron or nonalloy steel, width less than 600 mm.