High-Strength Steel Cold-Reduced Sheet for Bicycle Frames
Cold-reduced steel sheet, 2.0 mm thick and 280 mm wide, with a yield strength of 355 MPa and carbon content below 0.25%. It is used in bicycle frame manufacturing and is not further worked after cold reduction.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the sheet is further worked, such as cut to shape
Cutting or shaping beyond cold rolling may change the classification.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the steel is non-alloy and has a carbon content below 0.25%, supported by a mill certificate
• Confirm the product is not clad, plated, or coated
• Verify the width is under 600 mm to maintain classification under this item
Related Products under Tariff item 7211.23.00
Appliance Cold-Rolled Steel Bracket Strip 1.75mm
Narrow cold-reduced non-alloy steel strip, 260 mm wide and 1.75 mm thick, with carbon content below 0.25%. It is used for appliance mounting brackets and is not further worked after cold rolling.
Cold-Reduced Steel Banding Strap 2mm Thick
Narrow cold-rolled non-alloy steel strip, 280 mm wide and 2 mm thick, with carbon content below 0.25%. It is used for industrial packaging banding and is not further worked after cold reduction.
Cold-Rolled Low-Carbon Steel for Lock Washer Blanks
Cold-reduced non-alloy steel strip, 250 mm wide and 1.8 mm thick, with carbon content below 0.25%. It is supplied as blanks for stamped lock washers and is not further worked beyond cold rolling.
Cold-Rolled Low-Carbon Steel Strip for Automotive Trim
Flat-rolled non-alloy steel strip, 250 mm wide and 1.5 mm thick, with carbon content below 0.25%. It is cold-rolled without further surface treatments and is used for automotive trim.
Furniture Cold-Rolled Steel Frame Stock 2.0mm
Cold-rolled low-carbon steel strip, 285 mm wide and 2.0 mm thick, with carbon content below 0.25%. It is used for metal furniture frames and is not further worked after cold reduction.
High-Strength Cold-Rolled Steel for Agricultural Implements
Cold-rolled high-strength steel sheet, 1.7 mm thick and 292 mm wide, with a yield strength of 355 MPa and carbon content below 0.25%. It is used for plow blade supports in agricultural implements and is not further worked after cold reduction.