High-Strength Steel Cold Strip for Heavy Duty Shelving
Cold-rolled high-strength steel strip, 2.2 mm thick and 275 mm wide, with a minimum yield strength of 355 MPa and carbon content below 0.25%. It is not further worked than cold-rolling and is used for industrial shelving brackets. This product falls under tariff item 7211.23.00 as a flat-rolled non-alloy steel product, not clad, plated, or coated, with less than 0.25% carbon.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the carbon content is 0.25% or more
Tariff item 7211.19.00 covers cold-rolled non-alloy steel with higher carbon content.
If the strip is clad, plated, or coated
Tariff item 7211.29.00 applies to clad, plated, or coated flat-rolled non-alloy steel.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the strip is not further worked than cold-rolling and is free of cladding, plating, or coating
• Provide a mill test certificate to the CBSA showing carbon content below 0.25% and yield strength above 355 MPa
• Classify under 7211.23.00 for non-alloy steel
Related Products under Tariff item 7211.23.00
Appliance Cold-Rolled Steel Bracket Strip 1.75mm
Narrow cold-reduced non-alloy steel strip, 260 mm wide and 1.75 mm thick, with carbon content below 0.25%. It is not further worked than cold-reduction and is used for appliance mounting brackets. This product falls under tariff item 7211.23.00 as a flat-rolled non-alloy steel product, not clad, plated, or coated, with less than 0.25% carbon.
Cold-Reduced Low-Carbon Steel for Electrical Laminations
Cold-reduced low-carbon steel strip for electrical laminations, 250 mm wide and 0.35 mm thick, made of non-alloy steel with carbon content below 0.25%. It is not further worked than cold-rolled and has no cladding, plating or coating, providing precise gauge control for stamping motor laminations. This product falls under tariff item 7211.23.00 as a flat-rolled product of iron or non-alloy steel, width less than 600 mm.
Cold-Reduced Steel Banding Strap 0.75mm Thick
Cold-reduced steel banding strap, 250 mm wide and 0.75 mm thick, made of non-alloy steel with carbon content below 0.25%. It is not further worked than cold-rolled and has no cladding, plating or coating, making it suitable for packaging and securing cargo. This product is classified under tariff item 7211.23.00 as a flat-rolled product of iron or non-alloy steel, width less than 600 mm.
Cold-Reduced Steel Banding Strap 2mm Thick
Narrow cold-rolled non-alloy steel strip, 280 mm wide and 2 mm thick, with carbon content below 0.25%. It is not further worked than cold-rolling and is used for industrial packaging banding. This product falls under tariff item 7211.23.00 as a flat-rolled non-alloy steel product, not clad, plated, or coated, with less than 0.25% carbon.
Cold-Reduced Steel for Battery Casings
Thin cold-rolled low-carbon steel sheets under 600 mm wide, used for small battery enclosures and cans. They are not further worked than cold-rolled, uncoated, and non-alloy, with a carbon content below 0.25% by weight, qualifying under tariff item 7211.23.00.
Cold-Reduced Steel Sheet for Automotive Trim
Cold-rolled non-alloy steel sheet less than 600 mm wide, with a carbon content below 0.25% by weight, used for interior automotive trim panels. It is not clad, plated or coated, and is not further worked than cold-rolled, matching tariff item 7211.23.00.