Narrow High-Strength Cold-Rolled Steel for Appliance Chassis
High-strength cold-rolled steel strip, 1.8 mm thick and 290 mm wide, with a yield strength of 355 MPa and carbon content below 0.25%. It is used for washing machine chassis components and is not coated or further worked.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the strip is coated or plated
Coated products are excluded from this tariff item.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Verify the strip is not clad, plated, or coated, as such treatments may change classification
• Confirm the carbon content is below 0.25% with a mill certificate
• Ensure the width is less than 600 mm and thickness exceeds 1.25 mm
Related Products under Tariff item 7211.23.00
Appliance Cold-Rolled Steel Bracket Strip 1.75mm
Narrow cold-reduced non-alloy steel strip, 260 mm wide and 1.75 mm thick, with carbon content below 0.25%. It is used for appliance mounting brackets and is not further worked after cold rolling.
Cold-Reduced Steel Banding Strap 2mm Thick
Narrow cold-rolled non-alloy steel strip, 280 mm wide and 2 mm thick, with carbon content below 0.25%. It is used for industrial packaging banding and is not further worked after cold reduction.
Cold-Rolled Low-Carbon Steel for Lock Washer Blanks
Cold-reduced non-alloy steel strip, 250 mm wide and 1.8 mm thick, with carbon content below 0.25%. It is supplied as blanks for stamped lock washers and is not further worked beyond cold rolling.
Cold-Rolled Low-Carbon Steel Strip for Automotive Trim
Flat-rolled non-alloy steel strip, 250 mm wide and 1.5 mm thick, with carbon content below 0.25%. It is cold-rolled without further surface treatments and is used for automotive trim.
Furniture Cold-Rolled Steel Frame Stock 2.0mm
Cold-rolled low-carbon steel strip, 285 mm wide and 2.0 mm thick, with carbon content below 0.25%. It is used for metal furniture frames and is not further worked after cold reduction.
High-Strength Cold-Rolled Steel for Agricultural Implements
Cold-rolled high-strength steel sheet, 1.7 mm thick and 292 mm wide, with a yield strength of 355 MPa and carbon content below 0.25%. It is used for plow blade supports in agricultural implements and is not further worked after cold reduction.