New

Ask Wove anything about tariffs.

Try Tariff Assistant

Cold-Rolled Steel Strip for Office Staple Wire

Cold-rolled steel strip for office staple wire, 290 mm wide and 0.4 mm thick, made of precision low-carbon non-alloy steel with carbon content below 0.25%. It is not further worked than cold-rolled and has no cladding, plating or coating, providing high ductility for drawing into office staples. This product falls under tariff item 7211.23.00 as a flat-rolled product of iron or non-alloy steel, width less than 600 mm.

Import Duty Rates by Country of Origin

Origin CountryMFN TariffSurtaxesTotal Effective Rate
πŸ‡¨πŸ‡³ChinaFreeβ€”Free
πŸ‡²πŸ‡½MexicoFreeβ€”Free
πŸ‡ΊπŸ‡ΈUnited StatesFree+50.0%50%
πŸ‡©πŸ‡ͺGermanyFreeβ€”Free
πŸ‡―πŸ‡΅JapanFreeβ€”Free

More Specific Codes

This product may fall under a more specific subheading:

Alternative Classifications

This product could be classified differently depending on its characteristics or intended use.

7211.14.00Same rate: Free

If the strip is hot-rolled instead of cold-rolled

Hot-rolled narrow non-alloy steel products are classified under this heading.

7211.90.00Same rate: Free

If the strip is clad, plated or coated

Coated or plated narrow steel products fall under this tariff item.

7217.10.00Same rate: Free

If the product is already drawn into wire

Wire of non-alloy steel, not plated or coated, is classified under heading 7217.

Not sure which classification is right?

The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item β€” and can price the duty on it in the same conversation.

Import Tips & Compliance

β€’ Confirm the steel is non-alloy with carbon content below 0.25% and not further worked than cold-rolled

β€’ Provide documentation showing the strip's dimensions and mechanical properties

β€’ Check if the product qualifies for preferential tariff treatment under trade agreements

Related Products under Tariff item 7211.23.00

Appliance Cold-Rolled Steel Bracket Strip 1.75mm

Narrow cold-reduced non-alloy steel strip, 260 mm wide and 1.75 mm thick, with carbon content below 0.25%. It is not further worked than cold-reduction and is used for appliance mounting brackets. This product falls under tariff item 7211.23.00 as a flat-rolled non-alloy steel product, not clad, plated, or coated, with less than 0.25% carbon.

Cold-Reduced Low-Carbon Steel for Electrical Laminations

Cold-reduced low-carbon steel strip for electrical laminations, 250 mm wide and 0.35 mm thick, made of non-alloy steel with carbon content below 0.25%. It is not further worked than cold-rolled and has no cladding, plating or coating, providing precise gauge control for stamping motor laminations. This product falls under tariff item 7211.23.00 as a flat-rolled product of iron or non-alloy steel, width less than 600 mm.

Cold-Reduced Steel Banding Strap 0.75mm Thick

Cold-reduced steel banding strap, 250 mm wide and 0.75 mm thick, made of non-alloy steel with carbon content below 0.25%. It is not further worked than cold-rolled and has no cladding, plating or coating, making it suitable for packaging and securing cargo. This product is classified under tariff item 7211.23.00 as a flat-rolled product of iron or non-alloy steel, width less than 600 mm.

Cold-Reduced Steel Banding Strap 2mm Thick

Narrow cold-rolled non-alloy steel strip, 280 mm wide and 2 mm thick, with carbon content below 0.25%. It is not further worked than cold-rolling and is used for industrial packaging banding. This product falls under tariff item 7211.23.00 as a flat-rolled non-alloy steel product, not clad, plated, or coated, with less than 0.25% carbon.

Cold-Reduced Steel for Battery Casings

Thin cold-rolled low-carbon steel sheets under 600 mm wide, used for small battery enclosures and cans. They are not further worked than cold-rolled, uncoated, and non-alloy, with a carbon content below 0.25% by weight, qualifying under tariff item 7211.23.00.

Cold-Reduced Steel Sheet for Automotive Trim

Cold-rolled non-alloy steel sheet less than 600 mm wide, with a carbon content below 0.25% by weight, used for interior automotive trim panels. It is not clad, plated or coated, and is not further worked than cold-rolled, matching tariff item 7211.23.00.