Of nickel alloys
Nickel bars, rods, profiles and wire. > Bars, rods and profiles: > Of nickel alloys > Of nickel alloys
Duty Rate (from China)
Subheadings
Products classified under Tariff item 7505.12
625 Alloy Cold-Formed Nickel Shaft Blank
Cold-formed shaft blanks made from Inconel 625, a nickel-chromium-molybdenum alloy, designed for machining into pump and compressor components for power generation. The cold-forming process imparts improved mechanical properties while maintaining the alloy's excellent corrosion resistance.
7505.12.00625L Nickel Alloy Forging Bar
Inconel 625L is a low-carbon variant of the Inconel 625 nickel-chromium-molybdenum alloy, forged into bars for nuclear reactor components. The upset-forging process and non-cold-formed condition place it under tariff item 7505.12.00 as a bar of nickel alloy.
7505.12.00AL-6XN Cold-Formed Nickel Rod
Cold-formed rods made from AL-6XN, a super-austenitic nickel alloy with high molybdenum content, used in seawater desalination and pulp bleaching equipment. The cold-forming process enhances strength while preserving the alloy's resistance to chloride stress corrosion cracking.
7505.12.00AL-6XN Nickel Alloy Rod
AL-6XN is a super-austenitic stainless steel with high nickel content, supplied as annealed rods for seawater desalination plants. The rod form and nickel alloy composition classify it under tariff item 7505.12.00.
7505.12.00Alloy 20 Cold-Formed Nickel-Iron Rod
Cold-formed rods made from Alloy 20 (UNS N08020), a nickel-iron-chromium alloy with copper and molybdenum additions, designed for handling sulfuric acid in industrial piping systems. The cold-forming process improves dimensional accuracy and surface finish compared to hot-rolled equivalents.
7505.12.00Alloy 20 Nickel Profile Flat Bar
Alloy 20 nickel profile flat bar, a rectangular profile with a specific width-to-thickness ratio, made from Alloy 20 nickel-iron-chromium alloy. It is designed for use in sulfuric acid handling equipment. It is classified as a nickel alloy profile because its cross-section does not meet the definition of bars, rods, wire, plates, sheets, strip, foil, tubes, or pipes.
7505.12.00Alloy 20 Nickel Rod for Chemical Pumps
Alloy 20 (Carpenter 20) is a nickel-iron-chromium alloy rod used for pump shafts in sulfuric acid environments. Hot-rolled and non-cold-formed, this rod is classified under tariff item 7505.12.00 as a nickel alloy bar or rod.
7505.12.00Alloy 400 Cold-Formed Profile
Custom cold-formed L-shaped profiles made from Monel Alloy 400, a nickel-copper alloy known for excellent seawater resistance, used in shipbuilding brackets and structural supports. The cold-forming process allows precise dimensional control of the profile cross-section.
7505.12.00C-22 Hastelloy Cold-Formed Hexagonal Rod
Hexagonal cold-formed rods made from Hastelloy C-22, a nickel-chromium-molybdenum alloy with superior weldability and corrosion resistance, used in pollution control scrubbers and pharmaceutical reactors. The hexagonal cross-section qualifies as a profile under the tariff definition.
7505.12.00C-22 Hastelloy Nickel Alloy Profile
Hastelloy C-22 is a nickel-chromium-molybdenum alloy formed into custom angle profiles for flue gas desulfurization equipment. The hot-extruded, non-cold-formed profile is classified under tariff item 7505.12.00 as a profile of nickel alloy.
7505.12.00Carpenter 20 Cold-Formed Bar
Cold-formed bars made from Carpenter 20 (Custom 20Cb-3), a nickel-iron-chromium alloy stabilized with columbium, designed for phosphate coating tanks and sulfuric acid environments. The cold-forming process provides improved mechanical properties and surface quality.
7505.12.00Custom 455 Nickel Bar
Custom 455 is a precipitation-hardened nickel alloy bar used for aerospace fasteners. Hot-worked and non-cold-formed, this bar is classified under tariff item 7505.12.00 as a nickel alloy bar.
7505.12.00Custom Inconel 718 Extruded Profile
Custom Inconel 718 extruded profile, a bespoke aerodynamic profile extruded from Inconel 718 precipitation-hardening nickel alloy. It is intended for turbine engine components. It is classified as a nickel alloy profile because its complex cross-section does not conform to the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes, or pipes.
7505.12.00Duplex Nickel Alloy H-Profile
Duplex nickel alloy H-profile, an H-beam profile made from duplex nickel alloy, used for offshore platform construction. It is classified as a nickel alloy profile because its H-shaped cross-section does not conform to the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes, or pipes.
7505.12.00Hastelloy C-276 Cold-Formed Nickel Rod
Cold-formed rods made from Hastelloy C-276, a nickel-molybdenum-chromium alloy renowned for resistance to severe corrosive environments such as flue gas desulfurization systems. The cold-forming process enhances strength while maintaining excellent pitting and stress corrosion resistance.
7505.12.00Hastelloy C-276 Nickel Alloy Channel Profile
Hastelloy C-276 nickel alloy channel profile, a U-shaped channel profile made from Hastelloy C-276 nickel-molybdenum-chromium alloy. It is designed for extreme corrosion environments such as flue gas desulfurization systems. It is classified as a nickel alloy profile because its U-shaped cross-section does not conform to the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes, or pipes.
7505.12.00Hastelloy C-276 Nickel Alloy Flat Bar
Hastelloy C-276 is a nickel-molybdenum-chromium alloy supplied as flat bars with superior resistance to pitting and stress corrosion. The non-cold-formed flat bar is classified under tariff item 7505.12.00 as a nickel alloy bar.
7505.12.00Incoloy 825 Cold-Formed Nickel Alloy Bar
Cold-formed square bars made from Incoloy 825, a nickel-iron-chromium alloy with molybdenum and copper, used in oil and gas downhole tools and chemical reactors. The cold-forming process provides precise dimensions and improved mechanical properties per ASTM B425.
7505.12.00Incoloy 825 Nickel Alloy Square Rod
Incoloy 825 is a nickel-iron-chromium alloy square rod used in heat exchangers for sulfuric acid and phosphate environments. The non-cold-formed rod is classified under tariff item 7505.12.00 as a nickel alloy rod.
7505.12.00Incoloy 825 Nickel Alloy T-Profile
Incoloy 825 nickel alloy T-profile, a tee-shaped profile extruded from Incoloy 825 nickel-iron-chromium alloy. It is used for oil and gas downhole applications. It is classified as a nickel alloy profile because its T-shaped cross-section does not conform to the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes, or pipes.
7505.12.00Inconel 625 Cold-Formed Nickel Alloy Rod
Cold-formed rods made from Inconel 625, a high-performance nickel-chromium-molybdenum alloy designed for extreme corrosion resistance in chemical processing and aerospace applications. The cold-forming process improves yield strength while retaining the alloy's excellent fatigue resistance.
7505.12.00Inconel 625 Nickel Alloy I-Beam Profile
Inconel 625 nickel alloy I-beam profile, an extruded I-beam profile made from Inconel 625 nickel-chromium alloy. It is designed for high-strength structural applications in aerospace and chemical processing. It is classified as a nickel alloy profile because its I-shaped cross-section does not conform to the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes, or pipes.
7505.12.00Inconel 625 Nickel Alloy Round Bar
Inconel 625 is a high-performance nickel-chromium-molybdenum alloy round bar used in aerospace and chemical processing. Hot-rolled or forged and not cold-formed, this bar is classified under tariff item 7505.12.00.
7505.12.00Inconel X-750 Cold-Formed Spring Rod
Cold-formed rods made from precipitation-hardening Inconel X-750, designed for aircraft engine springs and gas turbine components requiring high strength at elevated temperatures. The cold-forming process optimizes the material for spring applications by improving tensile properties.
7505.12.00Inconel X-750 Spring Temper Rod
Inconel X-750 is an age-hardened nickel alloy rod used for springs in gas turbines. The rod is not cold-formed and is classified under tariff item 7505.12.00 as a nickel alloy rod.
7505.12.00Monel 400 Cold-Formed Nickel-Copper Rod
Cold-formed rods made from Monel 400, a nickel-copper alloy offering excellent resistance to seawater and acidic environments, commonly used in marine hardware and valves. The cold-forming process improves strength and dimensional accuracy.
7505.12.00Monel 400 Nickel Alloy Angle Profile
Monel 400 nickel alloy angle profile, an L-shaped angle profile extruded from Monel 400 nickel-copper alloy. It is used in marine engineering for corrosion resistance. It is classified as a nickel alloy profile because its L-shaped cross-section does not conform to the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes, or pipes.
7505.12.00Monel 400 Nickel Alloy Hexagonal Rod
Monel 400 is a nickel-copper alloy rod in a hexagonal profile, used in marine and oilfield applications. The non-cold-formed rod is classified under tariff item 7505.12.00 as a nickel alloy rod.
7505.12.00Monel K-500 Bar Stock
Monel K-500 is an age-hardenable nickel-copper bar used for valve stems and fasteners. Hot-rolled and non-cold-formed, this bar is classified under tariff item 7505.12.00 as a nickel alloy bar.
7505.12.00Monel K-500 Cold-Formed Rod
Age-hardenable cold-formed rods made from Monel K-500, a nickel-copper alloy with aluminum and titanium additions, used for marine propeller shafts and oilfield pump rods. The cold-forming process combined with precipitation hardening provides high strength and corrosion resistance.
7505.12.00Monel K-500 Round Corner Square Profile
Monel K-500 round corner square profile, a square profile with radiused corners made from age-hardenable Monel K-500. It is used for propeller shafts. The specific geometry qualifies as a profile under nickel alloys because it does not conform to the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes, or pipes.
7505.12.00Nickel 200 Alloy Forged Bar
Nickel 200 is a commercially pure nickel forged bar with low carbon content, used in food processing and electronics. Classified as a non-cold-formed nickel alloy bar under tariff item 7505.12.00.
7505.12.00Nickel 200 Alloy Hollow Profile
Nickel 200 alloy hollow profile, a non-round hollow structural profile made from commercially pure Nickel 200 alloy. It is used for cryogenic applications. It is classified as a nickel alloy profile because its hollow, non-round cross-section does not qualify as a tube or pipe under the definitions in Section XV.
7505.12.00Nickel 200 Cold-Formed Round Rod
Cold-formed round rods made from commercially pure Nickel 200 (UNS N02200), used in food processing equipment and electrical components requiring high purity. The cold-forming process improves mechanical properties while maintaining excellent corrosion resistance.
7505.12.00Nickel 201 Cold-Formed Bar Stock
Cold-formed bars made from low-carbon Nickel 201, used in caustic handling equipment and electronic components where superior performance at higher temperatures is required compared to Nickel 200. The cold-forming process provides improved strength and dimensional accuracy.
7505.12.00Nickel Alloy 718 Turbine Shaft Rod
Inconel 718 is a precipitation-hardening nickel alloy rod used for turbine shafts in power generation. Forged and non-cold-formed, this rod is classified under tariff item 7505.12.00 as a nickel alloy rod.
7505.12.00Nickel Alloy B-2 Round Bar
Alloy B-2 is a nickel-molybdenum bar used for HCl acid handling equipment. Solution-annealed and non-cold-formed, this bar is classified under tariff item 7505.12.00 as a nickel alloy bar.
7505.12.00Nickel-Chromium Strip Profile
Nickel-chromium strip profile, a precision strip profile with an embossed pattern made from nickel-chromium alloy. It is used for battery current collectors. It is classified as a nickel alloy profile because it is shaped beyond flat-rolled forms, and its thin profile with an embossed pattern does not conform to the definitions of plates, sheets, strip, or foil.
7505.12.00NiCrMo-3 Nickel Profile Bar
NiCrMo-3 (2.4603) is a European-spec nickel alloy T-bar profile for offshore platforms. Hot-rolled and non-cold-formed, this profile is classified under tariff item 7505.12.00 as a nickel alloy profile.
7505.12.00RA333 Cold-Formed Nickel Rod
Cold-formed rods made from RA333, a nickel-chromium-iron alloy with exceptional oxidation resistance up to 1800°F, used in high-temperature furnace parts and kiln furniture. The cold-forming process improves strength while maintaining the alloy's high-temperature stability.