Nickel 200 Cold-Formed Round Rod
Cold-formed round rods made from commercially pure Nickel 200 (UNS N02200), used in food processing equipment and electrical components requiring high purity. The cold-forming process improves mechanical properties while maintaining excellent corrosion resistance.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
PGA flags
No agency flag on this HTS number in the CBSA Single Window matching criteria.
CBSA Single Window matching criteria, unknown
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the nickel content is at least 99% by weight
This tariff item covers bars, rods and profiles of nickel, not alloyed, which is a different subheading.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the nickel content is at least 99% by weight to qualify as unalloyed nickel — this product may actually fall under subheading 7505.11.00
• Provide a mill certificate showing the nickel and cobalt content
• Verify the rods are in straight lengths
Related Products under Tariff item 7505.12.00
625 Alloy Cold-Formed Nickel Shaft Blank
Cold-formed shaft blanks made from Inconel 625, a nickel-chromium-molybdenum alloy, designed for machining into pump and compressor components for power generation. The cold-forming process imparts improved mechanical properties while maintaining the alloy's excellent corrosion resistance.
625L Nickel Alloy Forging Bar
Inconel 625L is a low-carbon variant of the Inconel 625 nickel-chromium-molybdenum alloy, forged into bars for nuclear reactor components. The upset-forging process and non-cold-formed condition place it under tariff item 7505.12.00 as a bar of nickel alloy.
AL-6XN Cold-Formed Nickel Rod
Cold-formed rods made from AL-6XN, a super-austenitic nickel alloy with high molybdenum content, used in seawater desalination and pulp bleaching equipment. The cold-forming process enhances strength while preserving the alloy's resistance to chloride stress corrosion cracking.
AL-6XN Nickel Alloy Rod
AL-6XN is a super-austenitic stainless steel with high nickel content, supplied as annealed rods for seawater desalination plants. The rod form and nickel alloy composition classify it under tariff item 7505.12.00.
Alloy 20 Cold-Formed Nickel-Iron Rod
Cold-formed rods made from Alloy 20 (UNS N08020), a nickel-iron-chromium alloy with copper and molybdenum additions, designed for handling sulfuric acid in industrial piping systems. The cold-forming process improves dimensional accuracy and surface finish compared to hot-rolled equivalents.
Alloy 20 Nickel Profile Flat Bar
Alloy 20 nickel profile flat bar, a rectangular profile with a specific width-to-thickness ratio, made from Alloy 20 nickel-iron-chromium alloy. It is designed for use in sulfuric acid handling equipment. It is classified as a nickel alloy profile because its cross-section does not meet the definition of bars, rods, wire, plates, sheets, strip, foil, tubes, or pipes.