Chapter 7505 — Customs Tariff Headings
Subheadings
Products classified under Tariff item 75.05
Cold-Drawn Nickel Flat Bar 25mm x 5mm
A flat bar of unalloyed nickel, cold-drawn to a rectangular cross-section of 25mm by 5mm. It is used in heat exchanger components where its resistance to acids is critical. As a cold-formed profile of nickel, not alloyed, it falls under tariff item 7505.11.00.
7505.11.00Cold-Drawn Nickel Rod 8mm for Electrodes
An 8mm diameter rod of pure nickel, cold-drawn for use as a base in electroplating electrodes. Its unalloyed composition ensures consistent conductivity and corrosion resistance. This cold-formed rod falls under tariff item 7505.11.00 for unalloyed nickel rods.
7505.11.00Cold-Drawn Nickel Rod for Battery Anodes
A cold-drawn pure nickel rod used as an anode material in nickel-metal hydride batteries. The high purity of the unalloyed nickel prevents contamination in electrochemical applications. This cold-formed rod is classified under tariff item 7505.11.00.
7505.11.00Cold-Drawn Nickel Rod for Catalysts
A pure nickel rod, cold-drawn for use in catalyst support grids. The unalloyed nickel provides resistance to corrosive chemical environments. This cold-formed rod is classified under tariff item 7505.11.00 for unalloyed nickel.
7505.11.00Cold-Drawn Nickel Square Profile Bar 1/2 Inch
A square cross-section profile bar made from pure nickel, cold-drawn to 1/2 inch sides for structural applications in electronics. The unalloyed nickel offers excellent conductivity and resistance to harsh environments. This cold-formed profile falls under tariff item 7505.11.00.
7505.11.00Cold-Formed Nickel Bar Stock 20mm Round
General-purpose cold-formed nickel bar stock, 20mm in diameter, for machining into fittings. The unalloyed composition provides broad corrosion resistance. This cold-formed round bar is classified under tariff item 7505.11.00.
7505.11.00Cold-Formed Nickel Half-Round Profile
A half-round profile cold-formed from pure nickel for decorative trim in marine applications. The unalloyed nickel resists corrosion in saltwater environments. This cold-formed profile falls under tariff item 7505.11.00.
7505.11.00Cold-Formed Nickel Oval Rod 18mm Major Axis
An oval cross-section nickel rod, cold-formed for specialized fittings. The unalloyed nickel provides corrosion resistance and formability. This cold-formed rod is classified under tariff item 7505.11.00.
7505.11.00Cold-Formed Nickel Profile for Chemical Pumps
A custom cold-formed nickel profile rod for pump shafts in acidic environments. The unalloyed composition ensures purity and corrosion resistance. This cold-formed profile falls under tariff item 7505.11.00.
7505.11.00Cold-Formed Nickel Rectangular Bar 15x10mm
A rectangular cold-formed pure nickel bar for structural supports in laboratories. The unalloyed nickel provides resistance to chemical exposure. This cold-formed bar is classified under tariff item 7505.11.00.
7505.11.00Cold-Formed Nickel Round Bar 12mm Diameter
A standard round bar of high-purity nickel, cold-formed for aerospace fasteners requiring ductility. The non-alloyed composition ensures optimal magnetic properties. This cold-formed rod is classified under tariff item 7505.11.00.
7505.11.00Cold-Formed Nickel T-Profile Rod
A T-shaped profile rod cold-formed from unalloyed nickel for framing applications. The unalloyed composition provides corrosion resistance. This cold-formed profile falls under tariff item 7505.11.00.
7505.11.00Cold-Formed Nickel Wire Rod 3mm Diameter
A precision cold-formed wire rod of pure nickel at 3mm diameter, ideal for welding wire feedstock or battery components. The unalloyed composition ensures high purity for electrochemical uses. This cold-formed rod falls under tariff item 7505.11.00.
7505.11.00Cold-Formed Pure Nickel Hexagonal Rod 10mm Across Flats
A hexagonal rod of unalloyed nickel, cold-formed for use in fasteners and valve stems in corrosive settings. The precise hexagonal profile is achieved via cold drawing. This cold-formed rod falls under tariff item 7505.11.00.
7505.11.00Cold-Formed Pure Nickel Round Rod 1/4 Inch Diameter
A high-purity nickel rod, cold-formed through drawing or extrusion processes to achieve precise 1/4 inch diameter dimensions. It consists of unalloyed nickel (minimum 99.8% Ni) and is used in chemical processing. This cold-formed rod is classified under tariff item 7505.11.00.
7505.11.00Nickel Angle Iron Profile
An L-shaped angle profile made from pure (non-alloyed) nickel, used as a structural support in marine environments where corrosion resistance is critical. Its angled cross-section qualifies it as a profile under tariff item 7505.11.00, which covers bars, rods and profiles of nickel, not alloyed.
7505.11.00Nickel Anode Rod 4 Inch Length Segments
Segmented rods of pure nickel used as anodes in electroplating baths. Hot-rolled and not cold-formed, they dissolve uniformly to deposit nickel onto substrates. Classified under tariff item 7505.11.00 as bars, rods and profiles of nickel, not alloyed.
7505.11.00Nickel Baffle Rod 20mm Square
Square baffle support rods made of pure nickel, hot-formed for use in heat exchangers to direct fluid flow. Not cold-formed, they retain the properties of non-alloyed nickel. Classified under tariff item 7505.11.00 as bars, rods and profiles of nickel, not alloyed.
7505.11.00Nickel Fastener Rod Stock 3/16 Inch
Rod stock of pure nickel intended for machining into custom fasteners, hot-rolled and not cold-formed. Offers corrosion resistance suitable for demanding environments. Classified under tariff item 7505.11.00 as bars, rods and profiles of nickel, not alloyed.
7505.11.00Nickel Hexagonal Rod 3/8 Inch Across Flats
Hexagonal cross-section rods of pure nickel, hot-worked and not cold-formed, used in valve stems for corrosive fluid handling. The hexagonal shape provides superior torque resistance. Classified under tariff item 7505.11.00 as bars, rods and profiles of nickel, not alloyed.
7505.11.00Nickel Perforated Profile
A perforated angle profile made from pure nickel, designed for use in filtration frames. Despite the perforations, it retains the character of a profile under tariff item 7505.11.00, as the definition of profiles does not exclude perforated or patterned products unless they become articles of another heading.
7505.11.00Nickel Rectangular Hollow Profile
A rectangular hollow section profile made from pure nickel, used as a support in heat exchanger assemblies. Its hollow, uniform cross-section places it under tariff item 7505.11.00 as a profile of non-alloyed nickel, distinct from tubes or pipes due to its non-circular shape and structural role.
7505.11.00Nickel Round Bar 1/2 Inch Diameter
Hot-rolled round bars of pure nickel, not cold-formed, used in heat exchanger tubesheets for high-temperature stability. The uniform cylindrical shape meets the definition of bars. Classified under tariff item 7505.11.00 as bars, rods and profiles of nickel, not alloyed.
7505.11.00Nickel Slotted Profile
A slotted T-profile made from pure nickel, designed for modular racking systems in laboratory environments. The slots do not remove its profile character, and it is classified under tariff item 7505.11.00 as a non-alloyed nickel profile with a defined non-round cross-section.
7505.11.00Nickel Square Bar 1 Inch Profile
Square-profile bars of pure nickel produced via hot extrusion without cold-forming, commonly used in aerospace fasteners. The square cross-section meets the bar definition under Section XV. Classified under tariff item 7505.11.00 as bars, rods and profiles of nickel, not alloyed.
7505.11.00Nickel Support Rod 10mm Round
Cylindrical support rods of pure nickel, hot-worked, for catalyst beds in reformers. They offer high-temperature oxidation resistance in demanding processes. Classified under tariff item 7505.11.00 as bars, rods and profiles of nickel, not alloyed.
7505.11.00Nickel T-Section Profile
A T-shaped profile extruded from pure nickel, used for bracketing in electrochemical cells. Its T-shaped cross-section is a classic profile form, and it is classified under tariff item 7505.11.00 for non-alloyed nickel profiles with defined non-round cross-sections.
7505.11.00Nickel U-Channel Profile
A U-channel profile made from pure nickel, used in battery electrode frames. The channeled cross-section qualifies it as a profile under tariff item 7505.11.00, not as a basic rod or bar, due to its non-uniform shape along the width.
7505.11.00Nickel Z-Profile Bar
A Z-shaped profile made from pure nickel, used for conveyor supports in wet processing lines. Its distinctive Z cross-section places it under tariff item 7505.11.00 as a non-alloyed nickel profile, distinct from bars or rods due to its shape.
7505.11.00Pure Nickel Catalyst Rod Core
Core rods of pure nickel for catalyst support in hydrogenation service, not cold-formed. They provide structural integrity and corrosion resistance. Classified under tariff item 7505.11.00 as bars, rods and profiles of nickel, not alloyed.
7505.11.00Pure Nickel C-Channel Profile
A C-shaped profile extruded from unalloyed nickel, used in chemical processing equipment for its corrosion resistance. It is classified under tariff item 7505.11.00 as a nickel profile, not alloyed, distinct from bars or rods due to its open C-shaped cross-section.
7505.11.00Pure Nickel Custom Extruded Profile
A custom-designed contoured profile made from unalloyed nickel, produced for OEM equipment. It is classified under tariff item 7505.11.00 as a non-alloyed nickel profile, provided it has a uniform cross-section and does not assume the character of an article of another heading.
7505.11.00Pure Nickel Evaporator Rod
Rods of pure nickel for evaporator internals, not cold-formed, offering alkali resistance in harsh environments. The cylindrical shape meets the rod definition. Classified under tariff item 7505.11.00 as bars, rods and profiles of nickel, not alloyed.
7505.11.00Pure Nickel Flat Rod 2x0.5 Inch
Rectangular flat rods of unalloyed nickel, hot-rolled without cold-forming, used in battery manufacturing anodes. The flat cross-section meets the bar definition with thickness exceeding one-tenth of width. Classified under tariff item 7505.11.00 as bars, rods and profiles of nickel, not alloyed.
7505.11.00Pure Nickel Hat Channel Profile
A hat-shaped (omega) profile made from unalloyed nickel, used as a corrosion barrier in aerospace applications. Its specialized shape qualifies it as a profile under tariff item 7505.11.00, which covers non-alloyed nickel profiles with defined non-round cross-sections.
7505.11.00Pure Nickel Round Rod 1/4 Inch Diameter
Solid cylindrical rods of unalloyed nickel, hot-rolled and not cold-formed, used in chemical processing equipment for corrosion resistance. The uniform round cross-section meets the rod definition. Classified under tariff item 7505.11.00 as bars, rods and profiles of nickel, not alloyed.
7505.11.00Pure Nickel Stirring Rod 6mm Diameter
Laboratory-grade stirring rods of unalloyed nickel, hot-drawn without cold-forming, for chemical mixing applications. They are inert to most reagents and provide reliable performance. Classified under tariff item 7505.11.00 as bars, rods and profiles of nickel, not alloyed.
7505.11.00Pure Nickel Thermocouple Rod Base
Rod stock of pure nickel for thermocouple sheaths, not cold-formed, offering thermal EMF stability. The cylindrical shape meets the rod definition. Classified under tariff item 7505.11.00 as bars, rods and profiles of nickel, not alloyed.
7505.11.00Pure Nickel T-Profile Rod 1x1 Inch
T-shaped profile rods of unalloyed nickel, hot-formed without cold processes, used in structural supports for reactors. The T cross-section meets the profile definition. Classified under tariff item 7505.11.00 as bars, rods and profiles of nickel, not alloyed.
7505.11.00Pure Nickel Welding Rod 1/8 Inch Diameter
Straight cylindrical welding rods of unalloyed nickel, hot-extruded without cold-forming, for TIG welding pure nickel components. They ensure strong, corrosion-resistant joints. Classified under tariff item 7505.11.00 as bars, rods and profiles of nickel, not alloyed.
7505.12.00625 Alloy Cold-Formed Nickel Shaft Blank
Cold-formed shaft blanks made from Inconel 625, a nickel-chromium-molybdenum alloy, designed for machining into pump and compressor components for power generation. The cold-forming process imparts improved mechanical properties while maintaining the alloy's excellent corrosion resistance.
7505.12.00625L Nickel Alloy Forging Bar
Inconel 625L is a low-carbon variant of the Inconel 625 nickel-chromium-molybdenum alloy, forged into bars for nuclear reactor components. The upset-forging process and non-cold-formed condition place it under tariff item 7505.12.00 as a bar of nickel alloy.
7505.12.00AL-6XN Cold-Formed Nickel Rod
Cold-formed rods made from AL-6XN, a super-austenitic nickel alloy with high molybdenum content, used in seawater desalination and pulp bleaching equipment. The cold-forming process enhances strength while preserving the alloy's resistance to chloride stress corrosion cracking.
7505.12.00AL-6XN Nickel Alloy Rod
AL-6XN is a super-austenitic stainless steel with high nickel content, supplied as annealed rods for seawater desalination plants. The rod form and nickel alloy composition classify it under tariff item 7505.12.00.
7505.12.00Alloy 20 Cold-Formed Nickel-Iron Rod
Cold-formed rods made from Alloy 20 (UNS N08020), a nickel-iron-chromium alloy with copper and molybdenum additions, designed for handling sulfuric acid in industrial piping systems. The cold-forming process improves dimensional accuracy and surface finish compared to hot-rolled equivalents.
7505.12.00Alloy 20 Nickel Profile Flat Bar
Alloy 20 nickel profile flat bar, a rectangular profile with a specific width-to-thickness ratio, made from Alloy 20 nickel-iron-chromium alloy. It is designed for use in sulfuric acid handling equipment. It is classified as a nickel alloy profile because its cross-section does not meet the definition of bars, rods, wire, plates, sheets, strip, foil, tubes, or pipes.
7505.12.00Alloy 20 Nickel Rod for Chemical Pumps
Alloy 20 (Carpenter 20) is a nickel-iron-chromium alloy rod used for pump shafts in sulfuric acid environments. Hot-rolled and non-cold-formed, this rod is classified under tariff item 7505.12.00 as a nickel alloy bar or rod.
7505.12.00Alloy 400 Cold-Formed Profile
Custom cold-formed L-shaped profiles made from Monel Alloy 400, a nickel-copper alloy known for excellent seawater resistance, used in shipbuilding brackets and structural supports. The cold-forming process allows precise dimensional control of the profile cross-section.
7505.12.00C-22 Hastelloy Cold-Formed Hexagonal Rod
Hexagonal cold-formed rods made from Hastelloy C-22, a nickel-chromium-molybdenum alloy with superior weldability and corrosion resistance, used in pollution control scrubbers and pharmaceutical reactors. The hexagonal cross-section qualifies as a profile under the tariff definition.
7505.12.00C-22 Hastelloy Nickel Alloy Profile
Hastelloy C-22 is a nickel-chromium-molybdenum alloy formed into custom angle profiles for flue gas desulfurization equipment. The hot-extruded, non-cold-formed profile is classified under tariff item 7505.12.00 as a profile of nickel alloy.
7505.12.00Carpenter 20 Cold-Formed Bar
Cold-formed bars made from Carpenter 20 (Custom 20Cb-3), a nickel-iron-chromium alloy stabilized with columbium, designed for phosphate coating tanks and sulfuric acid environments. The cold-forming process provides improved mechanical properties and surface quality.
7505.12.00Custom 455 Nickel Bar
Custom 455 is a precipitation-hardened nickel alloy bar used for aerospace fasteners. Hot-worked and non-cold-formed, this bar is classified under tariff item 7505.12.00 as a nickel alloy bar.
7505.12.00Custom Inconel 718 Extruded Profile
Custom Inconel 718 extruded profile, a bespoke aerodynamic profile extruded from Inconel 718 precipitation-hardening nickel alloy. It is intended for turbine engine components. It is classified as a nickel alloy profile because its complex cross-section does not conform to the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes, or pipes.
7505.12.00Duplex Nickel Alloy H-Profile
Duplex nickel alloy H-profile, an H-beam profile made from duplex nickel alloy, used for offshore platform construction. It is classified as a nickel alloy profile because its H-shaped cross-section does not conform to the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes, or pipes.
7505.12.00Hastelloy C-276 Cold-Formed Nickel Rod
Cold-formed rods made from Hastelloy C-276, a nickel-molybdenum-chromium alloy renowned for resistance to severe corrosive environments such as flue gas desulfurization systems. The cold-forming process enhances strength while maintaining excellent pitting and stress corrosion resistance.
7505.12.00Hastelloy C-276 Nickel Alloy Channel Profile
Hastelloy C-276 nickel alloy channel profile, a U-shaped channel profile made from Hastelloy C-276 nickel-molybdenum-chromium alloy. It is designed for extreme corrosion environments such as flue gas desulfurization systems. It is classified as a nickel alloy profile because its U-shaped cross-section does not conform to the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes, or pipes.
7505.12.00Hastelloy C-276 Nickel Alloy Flat Bar
Hastelloy C-276 is a nickel-molybdenum-chromium alloy supplied as flat bars with superior resistance to pitting and stress corrosion. The non-cold-formed flat bar is classified under tariff item 7505.12.00 as a nickel alloy bar.
7505.12.00Incoloy 825 Cold-Formed Nickel Alloy Bar
Cold-formed square bars made from Incoloy 825, a nickel-iron-chromium alloy with molybdenum and copper, used in oil and gas downhole tools and chemical reactors. The cold-forming process provides precise dimensions and improved mechanical properties per ASTM B425.
7505.12.00Incoloy 825 Nickel Alloy Square Rod
Incoloy 825 is a nickel-iron-chromium alloy square rod used in heat exchangers for sulfuric acid and phosphate environments. The non-cold-formed rod is classified under tariff item 7505.12.00 as a nickel alloy rod.
7505.12.00Incoloy 825 Nickel Alloy T-Profile
Incoloy 825 nickel alloy T-profile, a tee-shaped profile extruded from Incoloy 825 nickel-iron-chromium alloy. It is used for oil and gas downhole applications. It is classified as a nickel alloy profile because its T-shaped cross-section does not conform to the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes, or pipes.