Pure Nickel C-Channel Profile
A C-shaped profile extruded from unalloyed nickel, used in chemical processing equipment for its corrosion resistance. It is classified under tariff item 7505.11.00 as a nickel profile, not alloyed, distinct from bars or rods due to its open C-shaped cross-section.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the C-channel is closed to form a hollow tube with a single void
Closed hollow sections may be classified as tubes or pipes of nickel.
If the profile is further fabricated into a specific article for chemical equipment
Other articles of nickel may apply when the product takes on the character of a finished part.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the C-channel is open (not a closed tube) to maintain profile classification
• Keep documentation of the nickel composition, including cobalt content, to prove non-alloyed status
• If the profile is used in chemical equipment, check if it is a part of a machine of Chapter 84
Related Products under Tariff item 7505.11.00
Cold-Drawn Nickel Flat Bar 25mm x 5mm
A flat bar of unalloyed nickel, cold-drawn to a rectangular cross-section of 25mm by 5mm. It is used in heat exchanger components where its resistance to acids is critical. As a cold-formed profile of nickel, not alloyed, it falls under tariff item 7505.11.00.
Cold-Drawn Nickel Rod 8mm for Electrodes
An 8mm diameter rod of pure nickel, cold-drawn for use as a base in electroplating electrodes. Its unalloyed composition ensures consistent conductivity and corrosion resistance. This cold-formed rod falls under tariff item 7505.11.00 for unalloyed nickel rods.
Cold-Drawn Nickel Rod for Battery Anodes
A cold-drawn pure nickel rod used as an anode material in nickel-metal hydride batteries. The high purity of the unalloyed nickel prevents contamination in electrochemical applications. This cold-formed rod is classified under tariff item 7505.11.00.
Cold-Drawn Nickel Rod for Catalysts
A pure nickel rod, cold-drawn for use in catalyst support grids. The unalloyed nickel provides resistance to corrosive chemical environments. This cold-formed rod is classified under tariff item 7505.11.00 for unalloyed nickel.
Cold-Drawn Nickel Square Profile Bar 1/2 Inch
A square cross-section profile bar made from pure nickel, cold-drawn to 1/2 inch sides for structural applications in electronics. The unalloyed nickel offers excellent conductivity and resistance to harsh environments. This cold-formed profile falls under tariff item 7505.11.00.
Cold-Formed Nickel Bar Stock 20mm Round
General-purpose cold-formed nickel bar stock, 20mm in diameter, for machining into fittings. The unalloyed composition provides broad corrosion resistance. This cold-formed round bar is classified under tariff item 7505.11.00.