Nickel Angle Iron Profile
An L-shaped angle profile made from pure (non-alloyed) nickel, used as a structural support in marine environments where corrosion resistance is critical. Its angled cross-section qualifies it as a profile under tariff item 7505.11.00, which covers bars, rods and profiles of nickel, not alloyed.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the nickel is alloyed (e.g., containing over 1.5% cobalt or other elements above the limits)
Alloyed nickel profiles fall under a different subheading with its own duty rate.
If the profile is further fabricated into a specific article (e.g., drilled, machined) losing its profile character
Other articles of nickel may apply once the product takes on the character of a finished part.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the nickel content meets the definition of 'nickel, not alloyed' (at least 99% nickel plus cobalt, with cobalt ≤1.5%) to qualify for this tariff item
• Provide a mill certificate or lab analysis to the CBSA if requested
• Verify whether the profile is considered a 'part of general use' under Section XV Note 2, which could shift classification
Related Products under Tariff item 7505.11.00
Cold-Drawn Nickel Flat Bar 25mm x 5mm
A flat bar of unalloyed nickel, cold-drawn to a rectangular cross-section of 25mm by 5mm. It is used in heat exchanger components where its resistance to acids is critical. As a cold-formed profile of nickel, not alloyed, it falls under tariff item 7505.11.00.
Cold-Drawn Nickel Rod 8mm for Electrodes
An 8mm diameter rod of pure nickel, cold-drawn for use as a base in electroplating electrodes. Its unalloyed composition ensures consistent conductivity and corrosion resistance. This cold-formed rod falls under tariff item 7505.11.00 for unalloyed nickel rods.
Cold-Drawn Nickel Rod for Battery Anodes
A cold-drawn pure nickel rod used as an anode material in nickel-metal hydride batteries. The high purity of the unalloyed nickel prevents contamination in electrochemical applications. This cold-formed rod is classified under tariff item 7505.11.00.
Cold-Drawn Nickel Rod for Catalysts
A pure nickel rod, cold-drawn for use in catalyst support grids. The unalloyed nickel provides resistance to corrosive chemical environments. This cold-formed rod is classified under tariff item 7505.11.00 for unalloyed nickel.
Cold-Drawn Nickel Square Profile Bar 1/2 Inch
A square cross-section profile bar made from pure nickel, cold-drawn to 1/2 inch sides for structural applications in electronics. The unalloyed nickel offers excellent conductivity and resistance to harsh environments. This cold-formed profile falls under tariff item 7505.11.00.
Cold-Formed Nickel Bar Stock 20mm Round
General-purpose cold-formed nickel bar stock, 20mm in diameter, for machining into fittings. The unalloyed composition provides broad corrosion resistance. This cold-formed round bar is classified under tariff item 7505.11.00.