625L Nickel Alloy Forging Bar
Inconel 625L is a low-carbon variant of the Inconel 625 nickel-chromium-molybdenum alloy, forged into bars for nuclear reactor components. The upset-forging process and non-cold-formed condition place it under tariff item 7505.12.00 as a bar of nickel alloy.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the bar is made of not-alloyed nickel
This subheading covers bars of nickel, not alloyed, when the nickel content is at least 99%.
If the bar is further worked into a specific article
Once a bar is machined or fabricated into a distinct part, it may fall under other articles of nickel.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the bar is not cold-formed, as cold-worked products may be classified elsewhere
• Provide a mill certificate showing the nickel alloy composition to support the classification
• Check if the end-use in nuclear applications triggers any additional regulatory requirements
Related Products under Tariff item 7505.12.00
625 Alloy Cold-Formed Nickel Shaft Blank
Cold-formed shaft blanks made from Inconel 625, a nickel-chromium-molybdenum alloy, designed for machining into pump and compressor components for power generation. The cold-forming process imparts improved mechanical properties while maintaining the alloy's excellent corrosion resistance.
AL-6XN Cold-Formed Nickel Rod
Cold-formed rods made from AL-6XN, a super-austenitic nickel alloy with high molybdenum content, used in seawater desalination and pulp bleaching equipment. The cold-forming process enhances strength while preserving the alloy's resistance to chloride stress corrosion cracking.
AL-6XN Nickel Alloy Rod
AL-6XN is a super-austenitic stainless steel with high nickel content, supplied as annealed rods for seawater desalination plants. The rod form and nickel alloy composition classify it under tariff item 7505.12.00.
Alloy 20 Cold-Formed Nickel-Iron Rod
Cold-formed rods made from Alloy 20 (UNS N08020), a nickel-iron-chromium alloy with copper and molybdenum additions, designed for handling sulfuric acid in industrial piping systems. The cold-forming process improves dimensional accuracy and surface finish compared to hot-rolled equivalents.
Alloy 20 Nickel Profile Flat Bar
Alloy 20 nickel profile flat bar, a rectangular profile with a specific width-to-thickness ratio, made from Alloy 20 nickel-iron-chromium alloy. It is designed for use in sulfuric acid handling equipment. It is classified as a nickel alloy profile because its cross-section does not meet the definition of bars, rods, wire, plates, sheets, strip, foil, tubes, or pipes.
Alloy 20 Nickel Rod for Chemical Pumps
Alloy 20 (Carpenter 20) is a nickel-iron-chromium alloy rod used for pump shafts in sulfuric acid environments. Hot-rolled and non-cold-formed, this rod is classified under tariff item 7505.12.00 as a nickel alloy bar or rod.