Other
Copper plates, sheets and strip, of a thickness exceeding 0.15 mm. > Of copper-zinc base alloys (brass): > Other > Other
Duty Rate (from China)
Subheadings
Products classified under Tariff item 7409.29.00
Admiralty Brass C44300 Plate 5mm+
Admiralty brass plate, 5 mm or more thick, made from copper-zinc-tin alloy (C44300), used for heat exchangers. It qualifies as a brass plate exceeding 0.15 mm in thickness, with tin content below 3%.
Architectural Brass Flat Sheet 2mm
Flat brass sheet, 2 mm thick, made from a copper-zinc base alloy (brass). It is used for architectural applications such as building facades, elevator panels, and interior trim, and qualifies as a plate or sheet of brass exceeding 0.15 mm in thickness.
Architectural Brass Sheet 0.6mm
Architectural brass sheet, 0.6 mm thick and 420 mm wide, is a polished copper-zinc alloy flat product cut to size for door kicks, trim fabrication, and decorative applications. Its width is under 500 mm, but it still qualifies as a sheet under the definition in section note 9. As a brass sheet exceeding 0.15 mm thickness, it is classified under tariff item 7409.29.00.
Brass Artisan Craft Sheet 0.9mm
Brass sheet, 0.9 mm thick, made from a copper-zinc base alloy, intended for use by metal artists, sculptors, and custom fabricators. It meets the definition of a plate or sheet of brass exceeding 0.15 mm in thickness.
Brass Decorative Sheet 0.5mm Thick
Decorative brass sheet, 0.5 mm thick, made from a copper-zinc base alloy, used for decorative panels and architectural trim. It qualifies as a brass plate or sheet exceeding 0.15 mm in thickness.
Brass Electrical Panel Sheet 1.5mm
Brass sheet, 1.5 mm thick, made from a copper-zinc base alloy, used for electrical enclosures and distribution boxes. It falls under this tariff item as a general brass plate or sheet exceeding 0.15 mm in thickness.
Brass Furniture Inlay Sheet 0.6mm
Thin brass sheet, 0.6 mm thick, made from a copper-zinc base alloy, used for furniture veneer inlays and decorative banding. It qualifies as a brass plate or sheet exceeding 0.15 mm in thickness.
Brass Gasket Sheet 1.2mm Thick
Brass sheet stock, 1.2 mm thick, made from a copper-zinc base alloy, used for cutting industrial gaskets and shims. It falls under this tariff item as a brass plate or sheet exceeding 0.15 mm in thickness.
Brass Heat Exchanger Plate 3mm
Brass plate stock, 3 mm thick, made from a copper-zinc base alloy, used for heat exchanger fins and cores. It qualifies as a brass plate exceeding 0.15 mm in thickness.
Brass HVAC Shim Sheet 0.7mm
Brass sheet, 0.7 mm thick, made from a copper-zinc base alloy, used for HVAC ductwork shimming and vibration isolation. It falls under this tariff item as a brass plate or sheet exceeding 0.15 mm in thickness.
Brass Instrument Dial Sheet 0.25mm
Brass sheet, 0.25 mm thick, made from a copper-zinc base alloy, used for manufacturing watch/clock dials and gauge faces. It qualifies as a brass plate or sheet exceeding 0.15 mm in thickness.
Brass Marine Grade Sheet 1.0mm
Naval brass sheet, 1.0 mm thick, made from copper-zinc-tin alloy (UNS C46400), used for marine hardware and boat fittings. It qualifies as a brass plate or sheet exceeding 0.15 mm in thickness, with tin content below 3%.
Brass Model Making Sheet 0.4mm
Brass sheet, 0.4 mm thick, made from a copper-zinc base alloy, used for scale model construction, architectural models, and hobby use. It qualifies as a brass plate or sheet exceeding 0.15 mm in thickness.
Brass Nameplate Blanks 0.8mm
Unfinished brass blanks, 0.8 mm thick, made from a copper-zinc base alloy, used for manufacturing nameplates and identification tags. They qualify as brass plates or sheets exceeding 0.15 mm in thickness.
Brass Shim Stock 0.3mm Precision
Precision brass shim stock, 0.3 mm thick, in coils, made from a copper-zinc base alloy, used for machinery alignment and spacing. It qualifies as a brass plate or sheet exceeding 0.15 mm in thickness.
Brass Transformer Sheet 0.2mm
Brass sheet, 0.2 mm thick, made from a copper-zinc base alloy, used for transformer shielding and electrical separators. It qualifies as a brass plate or sheet exceeding 0.15 mm in thickness.
C22000 Commercial Bronze Sheet
A 0.8 mm thick sheet of C22000 commercial bronze (90/10 Cu-Zn), 580 mm wide, used for stamping decorative trim and nameplates. It falls under tariff item 7409.29.00 as a copper-zinc base alloy (brass) plate, with zinc as the predominant alloying element.
C23000 Red Brass Architectural Panel
C23000 red brass architectural panels are flat-rolled copper-zinc alloy sheets, 1.2 mm thick and 750 mm wide, with an 85/15 copper-to-zinc ratio that gives them their characteristic reddish hue. They are used for building facades, weatherstripping, and decorative cladding. Because they are copper-zinc base alloys (brass) in sheet form exceeding 0.15 mm thickness, they fall under tariff item 7409.29.00.
C26000 Cartridge Brass Sheet
C26000 cartridge brass sheet is a copper-zinc alloy with 30% zinc content, supplied in flat sheets with thicknesses from 0.15 mm to 5 mm and widths exceeding 500 mm. It is commonly used for ammunition casings, electrical components, and deep-drawn parts. As a brass sheet exceeding 0.15 mm thickness, it is classified under tariff item 7409.29.00.
C26800 Muntz Metal Brass Plate
C26800 Muntz metal plate is a 60/40 copper-zinc brass sheet, 0.2 to 4.8 mm thick and over 600 mm wide, used in marine hardware, architectural trim, and heat exchanger components. Its high zinc content makes it a copper-zinc base alloy. As a flat-rolled brass product exceeding 0.15 mm thickness, it falls under tariff item 7409.29.00.
C27200 Yellow Brass Nameplate Sheet
C27200 yellow brass sheets are 65/35 copper-zinc alloy flat products, 0.4 mm thick and 510 mm wide, used for engraved nameplates, instrument panels, and decorative trim. The alloy's yellow color comes from its zinc content, and it meets the definition of a copper-zinc base alloy. These sheets fall under tariff item 7409.29.00 as brass sheets exceeding 0.15 mm thickness.
C28000 Muntz Metal Valve Sheet
C28000 Muntz metal sheets are 60/40 copper-zinc alloy flat products, 3 mm thick and 650 mm wide, used for valve discs, pump components, and marine fittings. The alloy's balanced copper-zinc ratio makes it a standard brass. As flat-rolled brass exceeding 0.15 mm thickness, these sheets are classified under tariff item 7409.29.00.
C35300 High-Leaded Brass Block 6mm Thick
A 6 mm thick sliced block of C35300 high-leaded brass, a copper-zinc-lead alloy designed for machining. It qualifies as a copper-zinc base alloy (brass) plate under tariff item 7409.29.00 because zinc predominates over other elements, nickel is below 5%, and tin is below 3%.
C36000 Free-Cutting Brass Strip
C36000 free-cutting brass strip is a copper-zinc alloy with a lead addition for machinability, supplied in 0.3 mm thick sheets 520 mm wide. It is used for screw machine products, fittings, and precision components. Despite the lead content, zinc predominates over other elements, making it a copper-zinc base alloy under subheading note 1, and it falls under tariff item 7409.29.00.
C36000 Free-Machining Brass Plate 8mm
An 8 mm thick plate of C36000 free-machining brass, a copper-zinc-lead alloy optimized for machining into fittings and valves. It falls under tariff item 7409.29.00 as a copper-zinc base alloy (brass) plate, with zinc predominant, nickel below 5%, and tin below 3%.
C38500 Free-Cutting Brass Sheet 6mm Thick
A 6 mm thick sheet of C38500 free-cutting brass, containing copper, zinc, and lead for machinability, commonly used in architectural fittings and hardware. It is classified under tariff item 7409.29.00 as a copper-zinc base alloy (brass) plate, since zinc predominates and tin and nickel are within limits.
C44300 Admiralty Brass Flange Sheet
C44300 admiralty brass sheets are 71/28/1 copper-zinc-tin alloy flat products, 1.5 mm thick and 560 mm wide, used for flange blanks and tube supports. The tin content is below 3%, so the alloy remains a copper-zinc base alloy (brass) under subheading note 1. These sheets fall under tariff item 7409.29.00 as brass sheets exceeding 0.15 mm thickness.
C46400 Naval Brass Sheet
C46400 naval brass sheet is a tin-modified copper-zinc alloy, 1 to 4 mm thick and 550 mm wide, used for propeller shafts, valve stems, and marine hardware. The tin content is below 3%, keeping it within the brass definition under subheading note 1. As a flat-rolled brass product exceeding 0.15 mm thickness, it is classified under tariff item 7409.29.00.
C46400 Naval Brass Thick Plate 5.5mm
A 5.5 mm thick plate of C46400 naval brass, a copper-zinc-tin alloy for marine hardware with corrosion resistance. It falls under tariff item 7409.29.00 as a copper-zinc base alloy (brass) since tin is below 3% and zinc predominates over other elements.
C67400 Aluminum Brass Thick Sheet
A thick sheet of C67400 aluminum brass, a copper-zinc base alloy with aluminum additions, used for valves. It qualifies under tariff item 7409.29.00 as a copper-zinc base alloy (brass) plate, with zinc predominating over aluminum and other elements.
C68000 Medium-Strength Brass Sheet 7mm
A 7 mm thick sheet of C68000 brass, a copper-zinc-manganese alloy for structural fasteners. It falls under tariff item 7409.29.00 as a copper-zinc base alloy (brass) plate, with manganese not affecting the base classification per the subheading notes.
C69300 Brass Condenser Tube Sheet
C69300 high-strength brass tube sheets are 2.5 mm thick and 610 mm wide, used for heat exchangers and condensers before tube forming. This copper-zinc alloy with additional elements maintains zinc predominance, making it a brass under subheading note 1. As flat-rolled brass sheets exceeding 0.15 mm thickness, they fall under tariff item 7409.29.00.
C83600 Commercial Leaded Brass Plate
A cast brass plate of C83600 commercial leaded brass, over 5 mm thick, used for bearings and machined from a slab. It qualifies under tariff item 7409.29.00 as a copper-zinc base alloy (brass) plate, with zinc as the predominant alloying element.
C84400 Leaded Red Brass 7mm Plate
A 7 mm thick plate of C84400 leaded red brass, a copper-zinc base alloy with higher copper content but zinc as the base. It qualifies under tariff item 7409.29.00 as a copper-zinc base alloy (brass) plate, with zinc predominating over other elements.
C86300 High-Lead Manganese Bronze Plate
A thick plate of C86300 high-lead manganese bronze, a copper-zinc base alloy with manganese and lead additions, used for heavy-duty bearings and bushings. It falls under tariff item 7409.29.00 as a copper-zinc base alloy (brass) plate, with zinc predominating over manganese and lead.
C90200 Gilding Metal Brass Plate
A thick plate of C90200 gilding brass, a copper-zinc base alloy with high copper content, used for decorative trim. It qualifies under tariff item 7409.29.00 as a copper-zinc base alloy (brass) plate, with zinc as the predominant alloying element.
C90500 Yellow Brass Thick Strip
A thick strip of C90500 yellow brass, over 5 mm thick, used for hardware. It falls under tariff item 7409.29.00 as a copper-zinc base alloy (brass) plate, with zinc as the predominant alloying element.
C90700 Semi-Red Brass Plate 9mm
A 9 mm thick plate of C90700 semi-red brass, used for valves. It qualifies under tariff item 7409.29.00 as a copper-zinc base alloy (brass) plate, with zinc as the predominant alloying element.
C93200 Bearing Bronze Wait No Brass Equivalent C83800 Leaded Red Brass Plate
A thick plate of C83800 leaded red brass, a copper-zinc base alloy with high copper content, used for bearings. It falls under tariff item 7409.29.00 as a copper-zinc base alloy (brass) plate, with zinc predominating over other elements.
CDA 377 Half-Hard Brass Plate 10mm
A 10 mm thick plate of CDA 377 (C37700) half-hard brass, a copper-zinc-lead composition for forging. It is classified under tariff item 7409.29.00 as a copper-zinc base alloy (brass) plate, with zinc predominant.