Other
Zinc dust, powders and flakes. > Of copper alloys: > Of copper-zinc base alloys (brass) > Other
Duty Rate (from China)
Subheadings
Products classified under Tariff item 7409.29
Admiralty Brass C44300 Plate 5mm+
Admiralty brass plate, 5 mm or more thick, made from copper-zinc-tin alloy (C44300), used for heat exchangers. It qualifies as a brass plate exceeding 0.15 mm in thickness, with tin content below 3%.
7409.29.00Architectural Brass Flat Sheet 2mm
Flat brass sheet, 2 mm thick, made from a copper-zinc base alloy (brass). It is used for architectural applications such as building facades, elevator panels, and interior trim, and qualifies as a plate or sheet of brass exceeding 0.15 mm in thickness.
7409.29.00Brass Artisan Craft Sheet 0.9mm
Brass sheet, 0.9 mm thick, made from a copper-zinc base alloy, intended for use by metal artists, sculptors, and custom fabricators. It meets the definition of a plate or sheet of brass exceeding 0.15 mm in thickness.
7409.29.00Brass Decorative Sheet 0.5mm Thick
Decorative brass sheet, 0.5 mm thick, made from a copper-zinc base alloy, used for decorative panels and architectural trim. It qualifies as a brass plate or sheet exceeding 0.15 mm in thickness.
7409.29.00Brass Electrical Panel Sheet 1.5mm
Brass sheet, 1.5 mm thick, made from a copper-zinc base alloy, used for electrical enclosures and distribution boxes. It falls under this tariff item as a general brass plate or sheet exceeding 0.15 mm in thickness.
7409.29.00Brass Furniture Inlay Sheet 0.6mm
Thin brass sheet, 0.6 mm thick, made from a copper-zinc base alloy, used for furniture veneer inlays and decorative banding. It qualifies as a brass plate or sheet exceeding 0.15 mm in thickness.
7409.29.00Brass Gasket Sheet 1.2mm Thick
Brass sheet stock, 1.2 mm thick, made from a copper-zinc base alloy, used for cutting industrial gaskets and shims. It falls under this tariff item as a brass plate or sheet exceeding 0.15 mm in thickness.
7409.29.00Brass Heat Exchanger Plate 3mm
Brass plate stock, 3 mm thick, made from a copper-zinc base alloy, used for heat exchanger fins and cores. It qualifies as a brass plate exceeding 0.15 mm in thickness.
7409.29.00Brass HVAC Shim Sheet 0.7mm
Brass sheet, 0.7 mm thick, made from a copper-zinc base alloy, used for HVAC ductwork shimming and vibration isolation. It falls under this tariff item as a brass plate or sheet exceeding 0.15 mm in thickness.
7409.29.00Brass Instrument Dial Sheet 0.25mm
Brass sheet, 0.25 mm thick, made from a copper-zinc base alloy, used for manufacturing watch/clock dials and gauge faces. It qualifies as a brass plate or sheet exceeding 0.15 mm in thickness.
7409.29.00Brass Marine Grade Sheet 1.0mm
Naval brass sheet, 1.0 mm thick, made from copper-zinc-tin alloy (UNS C46400), used for marine hardware and boat fittings. It qualifies as a brass plate or sheet exceeding 0.15 mm in thickness, with tin content below 3%.
7409.29.00Brass Model Making Sheet 0.4mm
Brass sheet, 0.4 mm thick, made from a copper-zinc base alloy, used for scale model construction, architectural models, and hobby use. It qualifies as a brass plate or sheet exceeding 0.15 mm in thickness.
7409.29.00Brass Nameplate Blanks 0.8mm
Unfinished brass blanks, 0.8 mm thick, made from a copper-zinc base alloy, used for manufacturing nameplates and identification tags. They qualify as brass plates or sheets exceeding 0.15 mm in thickness.
7409.29.00Brass Shim Stock 0.3mm Precision
Precision brass shim stock, 0.3 mm thick, in coils, made from a copper-zinc base alloy, used for machinery alignment and spacing. It qualifies as a brass plate or sheet exceeding 0.15 mm in thickness.
7409.29.00Brass Transformer Sheet 0.2mm
Brass sheet, 0.2 mm thick, made from a copper-zinc base alloy, used for transformer shielding and electrical separators. It qualifies as a brass plate or sheet exceeding 0.15 mm in thickness.