Brass Decorative Sheet 0.5mm Thick
Decorative brass sheet, 0.5 mm thick, made from a copper-zinc base alloy, used for decorative panels and architectural trim. It qualifies as a brass plate or sheet exceeding 0.15 mm in thickness.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Verify the brass alloy composition meets the definition of copper-zinc base alloy (brass) per Chapter 74 subheading notes
• Ensure the thickness is accurately declared as 0.5 mm, exceeding the 0.15 mm minimum
• If the sheets have a decorative pattern, confirm they do not become articles of Chapter 94 (furniture, lighting) or other headings
Related Products under Tariff item 7409.29.00
Admiralty Brass C44300 Plate 5mm+
Admiralty brass plate, 5 mm or more thick, made from copper-zinc-tin alloy (C44300), used for heat exchangers. It qualifies as a brass plate exceeding 0.15 mm in thickness, with tin content below 3%.
Architectural Brass Flat Sheet 2mm
Flat brass sheet, 2 mm thick, made from a copper-zinc base alloy (brass). It is used for architectural applications such as building facades, elevator panels, and interior trim, and qualifies as a plate or sheet of brass exceeding 0.15 mm in thickness.
Brass Artisan Craft Sheet 0.9mm
Brass sheet, 0.9 mm thick, made from a copper-zinc base alloy, intended for use by metal artists, sculptors, and custom fabricators. It meets the definition of a plate or sheet of brass exceeding 0.15 mm in thickness.
Brass Electrical Panel Sheet 1.5mm
Brass sheet, 1.5 mm thick, made from a copper-zinc base alloy, used for electrical enclosures and distribution boxes. It falls under this tariff item as a general brass plate or sheet exceeding 0.15 mm in thickness.
Brass Furniture Inlay Sheet 0.6mm
Thin brass sheet, 0.6 mm thick, made from a copper-zinc base alloy, used for furniture veneer inlays and decorative banding. It qualifies as a brass plate or sheet exceeding 0.15 mm in thickness.
Brass Gasket Sheet 1.2mm Thick
Brass sheet stock, 1.2 mm thick, made from a copper-zinc base alloy, used for cutting industrial gaskets and shims. It falls under this tariff item as a brass plate or sheet exceeding 0.15 mm in thickness.