Brass Artisan Craft Sheet 0.9mm
Brass sheet, 0.9 mm thick, made from a copper-zinc base alloy, intended for use by metal artists, sculptors, and custom fabricators. It meets the definition of a plate or sheet of brass exceeding 0.15 mm in thickness.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
PGA flags
No agency flag on this HTS number in the CBSA Single Window matching criteria.
CBSA Single Window matching criteria, unknown
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the alloy composition to ensure it is a copper-zinc base alloy (brass) and not a copper-tin bronze, which would change classification
• Keep records of the sheet's thickness and dimensions for CBSA verification
• If the sheets are cut to non-rectangular shapes, ensure they do not assume the character of articles of other headings
Related Products under Tariff item 7409.29.00
Admiralty Brass C44300 Plate 5mm+
Admiralty brass plate, 5 mm or more thick, made from copper-zinc-tin alloy (C44300), used for heat exchangers. It qualifies as a brass plate exceeding 0.15 mm in thickness, with tin content below 3%.
Architectural Brass Flat Sheet 2mm
Flat brass sheet, 2 mm thick, made from a copper-zinc base alloy (brass). It is used for architectural applications such as building facades, elevator panels, and interior trim, and qualifies as a plate or sheet of brass exceeding 0.15 mm in thickness.
Architectural Brass Sheet 0.6mm
Architectural brass sheet, 0.6 mm thick and 420 mm wide, is a polished copper-zinc alloy flat product cut to size for door kicks, trim fabrication, and decorative applications. Its width is under 500 mm, but it still qualifies as a sheet under the definition in section note 9. As a brass sheet exceeding 0.15 mm thickness, it is classified under tariff item 7409.29.00.
Brass Decorative Sheet 0.5mm Thick
Decorative brass sheet, 0.5 mm thick, made from a copper-zinc base alloy, used for decorative panels and architectural trim. It qualifies as a brass plate or sheet exceeding 0.15 mm in thickness.
Brass Electrical Panel Sheet 1.5mm
Brass sheet, 1.5 mm thick, made from a copper-zinc base alloy, used for electrical enclosures and distribution boxes. It falls under this tariff item as a general brass plate or sheet exceeding 0.15 mm in thickness.
Brass Furniture Inlay Sheet 0.6mm
Thin brass sheet, 0.6 mm thick, made from a copper-zinc base alloy, used for furniture veneer inlays and decorative banding. It qualifies as a brass plate or sheet exceeding 0.15 mm in thickness.