C36000 Free-Machining Brass Plate 8mm
An 8 mm thick plate of C36000 free-machining brass, a copper-zinc-lead alloy optimized for machining into fittings and valves. It falls under tariff item 7409.29.00 as a copper-zinc base alloy (brass) plate, with zinc predominant, nickel below 5%, and tin below 3%.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the product is supplied in coils
Coiled brass strip is classified separately from flat plates.
If the product is in bar or rod form rather than plate
Bars and rods of copper-zinc base alloys fall under heading 7407.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Keep records of the alloy's chemical composition to confirm it meets the brass definition under Chapter 74 notes
• For plates over 5 mm thick, ensure the thickness is accurately measured
• If the plates are cut to non-rectangular shapes, confirm they still qualify as plates under the chapter definitions
Related Products under Tariff item 7409.29.00
Admiralty Brass C44300 Plate 5mm+
Admiralty brass plate, 5 mm or more thick, made from copper-zinc-tin alloy (C44300), used for heat exchangers. It qualifies as a brass plate exceeding 0.15 mm in thickness, with tin content below 3%.
Architectural Brass Flat Sheet 2mm
Flat brass sheet, 2 mm thick, made from a copper-zinc base alloy (brass). It is used for architectural applications such as building facades, elevator panels, and interior trim, and qualifies as a plate or sheet of brass exceeding 0.15 mm in thickness.
Architectural Brass Sheet 0.6mm
Architectural brass sheet, 0.6 mm thick and 420 mm wide, is a polished copper-zinc alloy flat product cut to size for door kicks, trim fabrication, and decorative applications. Its width is under 500 mm, but it still qualifies as a sheet under the definition in section note 9. As a brass sheet exceeding 0.15 mm thickness, it is classified under tariff item 7409.29.00.
Brass Artisan Craft Sheet 0.9mm
Brass sheet, 0.9 mm thick, made from a copper-zinc base alloy, intended for use by metal artists, sculptors, and custom fabricators. It meets the definition of a plate or sheet of brass exceeding 0.15 mm in thickness.
Brass Decorative Sheet 0.5mm Thick
Decorative brass sheet, 0.5 mm thick, made from a copper-zinc base alloy, used for decorative panels and architectural trim. It qualifies as a brass plate or sheet exceeding 0.15 mm in thickness.
Brass Electrical Panel Sheet 1.5mm
Brass sheet, 1.5 mm thick, made from a copper-zinc base alloy, used for electrical enclosures and distribution boxes. It falls under this tariff item as a general brass plate or sheet exceeding 0.15 mm in thickness.