304 Stainless Steel Cold-Rolled Sheet 0.4mm Thick
Flat-rolled 304 stainless steel sheet, cold-rolled to a thickness of 0.4 mm and width exceeding 600 mm, not further worked beyond cold reduction. This product falls under heading 72.19 as a stainless steel flat-rolled product with a thickness less than 0.5 mm.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the width is less than 600 mm
Stainless steel flat-rolled products narrower than 600 mm are classified in heading 72.20.
If the sheet has been further worked (e.g., polished, coated)
Additional working beyond cold reduction moves the product to the residual item in heading 72.19.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Verify that the thickness is below 0.5 mm and the width exceeds 600 mm to qualify for this tariff item
• Provide a certificate of analysis confirming the 304 grade composition
• Ensure the product is not further worked beyond cold rolling, as this may affect classification
Related Products under Tariff item 7219.35.00
17-4 PH Precipitation Hardening Stainless Sheet 0.3mm
Cold-rolled sheet of 17-4 PH precipitation-hardening stainless steel, 0.3 mm thick and at least 600 mm wide, supplied without further surface treatment. This product is a flat-rolled stainless steel article of heading 72.19, specifically of a thickness less than 0.5 mm, and is not further worked beyond cold reduction.
201 Stainless Steel Thin Cold-Rolled Plate 0.2mm
Austenitic 201 stainless steel cold-rolled plate, 0.2 mm thick and 600 mm or more in width, without additional surface treatments. This is a flat-rolled stainless steel product of heading 72.19, with a thickness below 0.5 mm, and is not further worked beyond cold reduction.
304L Low Carbon Stainless Cold-Reduced Sheet 0.35mm
Low-carbon 304L stainless steel sheet, cold-reduced to 0.35 mm thickness with a width of at least 600 mm, not subjected to further working. This is a flat-rolled stainless steel product of heading 72.19, with a thickness under 0.5 mm, and is not further worked beyond cold reduction.
310 Stainless Steel Heat-Resistant Cold Sheet 0.4mm
High-temperature 310 stainless steel cold-rolled sheet, 0.4 mm thick and 600 mm or more in width, without further treatments. This is a flat-rolled stainless steel product of heading 72.19, with a thickness below 0.5 mm, and is not further worked beyond cold reduction.
316L Stainless Steel Cold-Reduced Coil 0.3mm
Cold-reduced 316L stainless steel coil, 0.3 mm thick with width over 600 mm, in flat-rolled form without additional processing. This product falls under heading 72.19 as a stainless steel flat-rolled product with a thickness less than 0.5 mm, not further worked beyond cold reduction.
317 Stainless Steel Cold-Reduced Coil
Flat-rolled 317 grade stainless steel coil, 0.35 mm thick, 1500 mm wide, with 11-15% Ni and 3-4% Mo for superior pitting resistance. This product falls under heading 72.19 as a stainless steel flat-rolled product with a thickness less than 0.5 mm, not further worked beyond cold reduction.