Of a thickness of less than 0.5 mm
Flat-rolled products of stainless steel, of a width of 600 mm or more. > Not further worked than cold-rolled (cold-reduced): > Of a thickness of less than 0.5 mm
Duty Rate (from China)
Products classified under Tariff item 7219.35
17-4 PH Precipitation Hardening Stainless Sheet 0.3mm
Cold-rolled sheet of 17-4 PH martensitic precipitation hardening stainless steel, 0.3 mm thick and 600 mm or more in width, with no further working beyond cold reduction. This product meets the definition of flat-rolled stainless steel products of heading 72.19, specifically classified under tariff item 7219.35.00 for thickness less than 0.5 mm.
7219.35.00201 Cold-Rolled Stainless Steel Coil 0.48mm
An austenitic 201 grade stainless steel coil, cold-rolled to 0.48 mm thickness, containing 1-4% nickel and over 600 mm wide. It is a flat-rolled stainless steel product not further worked than cold-rolled, classified under tariff item 7219.35.00.
7219.35.00201 Stainless Steel Cold-Rolled Coil 0.41mm x 1219mm
An austenitic 201 grade cold-rolled stainless steel coil at 0.41 mm thickness and 1219 mm width, supplied in coils for construction and utensil applications. The product is not further worked than cold-rolled and falls under this tariff item for thin stainless steel flat products.
7219.35.00201 Stainless Steel Thin Cold-Rolled Plate 0.2mm
Austenitic 201 stainless steel cold-rolled plate at 0.2 mm thickness, width 600 mm or more, without further surface treatments. This ultra-thin product meets the criteria for flat-rolled stainless steel of heading 72.19, classified under tariff item 7219.35.00 as not further worked than cold-rolled and of a thickness less than 0.5 mm.
7219.35.00301 Half-Hard Cold-Rolled Stainless Coil 0.41mm
A 301 half-hard stainless steel coil with 6.5-7.5% nickel, cold-rolled to 0.41 mm thickness, in wide coils for spring applications. It is a flat-rolled stainless steel product not further worked than cold-rolled, falling under tariff item 7219.35.00.
7219.35.00304 Cold-Rolled Stainless Shim Stock Coil 0.2mm x 1000mm
An ultra-thin 0.2 mm 304 stainless steel cold-rolled coil used as shim stock, with a width of 1000 mm, supplied in coil form. The product is not further worked than cold-rolled and is classified under this tariff item for thin stainless steel flat products.
7219.35.00304L Low Carbon Stainless Cold-Reduced Sheet 0.35mm
Low-carbon 304L stainless steel sheet, cold-reduced to 0.35 mm thick with width ≥600 mm, not subjected to further working. This product fits tariff item 7219.35.00 for thin-gauge stainless flat products, being cold-rolled and under 0.5 mm thickness, used in food processing equipment.
7219.35.00304 Stainless Steel Cold-Rolled Coil 0.4mm x 1219mm
A thin cold-rolled stainless steel coil made from 304 grade alloy, with a thickness of 0.4 mm and a width of 1219 mm, supplied in coils weighing up to 20 tons. The product is not further worked than cold-rolled and is classified under this tariff item.
7219.35.00304 Stainless Steel Cold-Rolled Sheet 0.4mm Thick
Flat-rolled 304 stainless steel sheet, cold-rolled to a thickness of 0.4 mm and width exceeding 600 mm, not further worked beyond cold-reduction. This product falls under tariff item 7219.35.00 due to its stainless steel composition, cold-rolled state, and thickness less than 0.5 mm.
7219.35.00310 Stainless Steel Heat-Resistant Cold Sheet 0.4mm
High-temperature 310 stainless steel cold-rolled sheet, 0.4 mm thick and 600+ mm wide, without further treatments. This product matches tariff item 7219.35.00 for thin cold-reduced stainless flat-rolled products, being of a thickness less than 0.5 mm and not further worked.
7219.35.00316L Cold-Reduced Stainless Coil 0.3mm Thick
A 316L stainless steel coil, cold-rolled to 0.3 mm thickness in wide coils over 600 mm, with 10-14% nickel. It is suitable for chemical processing equipment and is a flat-rolled stainless steel product not further worked than cold-rolled, under tariff item 7219.35.00.
7219.35.00316L Stainless Steel Cold-Reduced Coil 0.3mm
Cold-reduced 316L stainless steel coil, 0.3 mm thick with width over 600 mm, in flat-rolled form without additional processing. This product is classified under tariff item 7219.35.00 for its thin gauge stainless steel that is only cold-rolled, with a thickness of less than 0.5 mm.
7219.35.00316L Stainless Steel Cold-Reduced Coil 0.45mm x 1500mm
A cold-reduced 316L stainless steel coil, 0.45 mm thick and 1500 mm wide, in coil form for corrosion-resistant applications. The product is not further worked than cold-rolled and is classified under this tariff item for thin stainless steel flat products.
7219.35.00316 Stainless Steel Cold-Rolled Decorative Coil 0.48mm x 1350mm
A marine-grade 316 stainless cold-rolled coil, 0.48 mm thick and 1350 mm wide, for decorative architectural panels. The product is not further worked than cold-rolled and is classified under this tariff item for thin stainless steel flat products.
7219.35.00317 Stainless Steel Cold-Reduced Coil
Flat-rolled 317 grade stainless steel coil, 0.35 mm thick, 1500 mm wide, with 11-15% Ni and 3-4% Mo for superior pitting resistance. This product fits tariff item 7219.35.00 as cold-rolled stainless not further worked, in coils under 0.5 mm thickness.
7219.35.00321 Stainless Steel Stabilized Cold-Rolled Foil 0.1mm
Titanium-stabilized 321 stainless steel cold-rolled foil-like sheet at 0.1 mm thickness, width ≥600 mm plain. This product is classified under tariff item 7219.35.00 for the thinnest cold-reduced stainless flat products, being of a thickness less than 0.5 mm and not further worked.
7219.35.00409 Stainless Steel Cold-Reduced Coil 0.35mm x 1500mm
A ferritic 409 stainless steel coil cold-reduced to 0.35 mm thickness and 1500 mm width, for exhaust systems and appliances. The product is not further worked than cold-rolled and is classified under this tariff item for thin stainless steel flat products.
7219.35.00409 Stainless Steel Cold-Rolled Automotive Sheet 0.48mm
409 ferritic stainless steel cold-rolled sheet at 0.48 mm thickness for automotive exhaust, width over 600 mm uncoated. This product is classified under tariff item 7219.35.00 as a cold-reduced stainless product not further processed, with a thickness of less than 0.5 mm.
7219.35.00430 Cold-Rolled Stainless Steel Coil 0.45mm
A thin 430 grade stainless steel coil, 0.45 mm thick with about 0.75% nickel, cold-reduced in coils over 600 mm wide and not further worked. It is a flat-rolled stainless steel product classified under tariff item 7219.35.00.
7219.35.00430 Stainless Steel Cold-Rolled Sheet 0.45mm
Ferritic 430 grade stainless steel flat-rolled sheet, cold-rolled to 0.45 mm thickness and minimum 600 mm width, not further worked. This product is classified under tariff item 7219.35.00 for thin, cold-reduced stainless products used in appliances, with a thickness of less than 0.5 mm.
7219.35.00AL-6XN Alloy Cold-Rolled Stainless Coil
High-performance AL-6XN super-austenitic stainless coil, cold-rolled to 0.3 mm x 1200 mm, with 20-22% Ni and 4% Mo for extreme corrosion environments. This product precisely matches tariff item 7219.35.00 for thin cold-rolled stainless coils, being of a thickness less than 0.5 mm.
7219.35.00Appliance Grade 441 Stainless Coil
A thin cold-rolled coil of Type 441 ferritic stainless steel, with thickness under 0.5 mm and width at least 600 mm, containing less than 15% chromium by weight. Not further worked, it is used for dishwasher linings, oven trim, and washing machine components, classifying under tariff item 7219.35.00.
7219.35.00Automotive Trim 439 Stainless Coil
A cold-rolled stainless steel coil of stabilized ferritic Type 439 grade, under 0.5 mm thickness and 600 mm or more width, with less than 15% chromium by weight. In coils and not further worked, it is ideal for corrosion-resistant automotive trim, classifying under tariff item 7219.35.00.
7219.35.00Custom 317LMN Cold-Reduced Coil
317LMN low-carbon, high-Mo stainless steel cold-rolled coil, 0.48 mm thick, 1400 mm wide, 13% Ni, 4.5% Mo for weldability in sour service. This product classifies under tariff item 7219.35.00 based on stainless composition, cold-reduction, and thickness less than 0.5 mm.
7219.35.00Decorative Fascia Stainless Coil
An ultra-thin cold-rolled stainless coil, under 0.5 mm thick and at least 600 mm wide, with less than 15% chromium, for manufacturing decorative fascia panels in home appliances. In coils and cold-reduced only, it matches tariff item 7219.35.00.
7219.35.00Duplex 2205 Stainless Cold-Reduced Panel 0.45mm
Duplex 2205 stainless steel cold-reduced flat panel, 0.45 mm thickness over 600 mm width, no further working. This product is classified under tariff item 7219.35.00 for corrosion-resistant thin cold-rolled stainless products, being of a thickness less than 0.5 mm.
7219.35.00Exhaust Shield 409CB Stainless Coil
A cold-rolled coil of 409CB stabilized ferritic stainless steel, under 0.5 mm thickness and 600 mm or more width, with less than 15% chromium by weight. For heat shields in vehicle exhaust systems, it is a flat-rolled stainless steel product not further worked than cold-rolled, under tariff item 7219.35.00.
7219.35.00Ferritic 409 Stainless Steel Coil
A cold-reduced coil of Grade 409 ferritic stainless steel, thickness under 0.5 mm, width over 600 mm, with chromium content under 15% by weight. Not further worked, it is suitable for exhaust systems and mufflers, classifying under tariff item 7219.35.00.
7219.35.00HVAC Duct Liner Stainless Coil
A thin-gauge cold-rolled stainless coil, under 0.5 mm thick and 600 mm or more wide, with less than 15% chromium, for HVAC duct liners and ventilation components. Not further worked and in coil form, it fits tariff item 7219.35.00.
7219.35.00Low Cr 3CR12 Stainless Coil
A proprietary 3CR12 utility stainless steel cold-rolled coil, under 0.5 mm thick and over 600 mm wide, certified with less than 15% chromium. In coils and cold-reduced only, it is for structural cladding and tanks, fitting tariff item 7219.35.00.
7219.35.00Martensitic 410S Stainless Coil
A cold-rolled martensitic Type 410S stainless steel coil, measuring less than 0.5 mm in thickness and exceeding 600 mm in width. The material is certified with a chromium content below 15% by weight and is not further worked than cold-rolled, making it suitable for cutlery blanks and valve components.
7219.35.00SMO 254 Cold-Rolled Stainless Steel Coil
Uranus SMO 254 super-austenitic grade cold-rolled coil, 0.25 mm thickness, 1600 mm width, 18% Ni, 4.8% Mo for urea plants. This product aligns with tariff item 7219.35.00 for thin cold-reduced stainless coils with high specific properties, being of a thickness less than 0.5 mm.
7219.35.00Thin 42Lb Gauge Stainless Coil
A cold-reduced stainless steel coil equivalent to 42 lb base weight, with a thickness under 0.5 mm and a width of 600 mm or more. The coil is in coils, not further worked than cold-rolled, and is intended for packaging and container stock applications.
7219.35.00Type 304 Cold-Rolled Stainless Steel Coil 0.4mm Thick
A flat-rolled stainless steel coil of 0.4 mm thickness, 304 grade with approximately 8-10.5% nickel, cold-rolled but not further worked, and width exceeding 600 mm. It is classified under tariff item 7219.35.00.
7219.35.00Type 316H High-Carbon Stainless Coil
Elevated carbon Type 316H stainless cold-rolled coil for high-temperature service, 0.4 mm x 900 mm, 12% Ni, 2.8% Mo content. This product is classified under tariff item 7219.35.00 for its cold-rolled stainless flat product form, coil packaging, and thin gauge under 0.5 mm.
7219.35.00Type 316L Stainless Steel Cold-Rolled Coil
A cold-rolled stainless steel coil, Type 316L, measuring 0.4 mm in thickness and 1250 mm in width. Its composition of 10-14% nickel and 2-3% molybdenum provides enhanced corrosion resistance, classifying it as a flat-rolled stainless steel product under tariff item 7219.35.00.
7219.35.00Type 316Ti Stabilized Stainless Coil
A cold-rolled Type 316Ti stainless steel coil, 0.45 mm thick and 1000 mm wide, with 10-14% nickel, 2.5% molybdenum, and titanium stabilization. It is a flat-rolled stainless steel product not further worked than cold-rolled, fitting tariff item 7219.35.00.
7219.35.00Type 430 Cold-Rolled Stainless Steel Coil
A thin cold-rolled stainless steel coil made from Type 430 ferritic stainless steel, with a thickness of less than 0.5 mm and a width of 600 mm or more. The certified composition contains 16-18% chromium but overall less than 15% by weight for this product, and it is not further worked than cold-rolled.
7219.35.00Type 434 Ferritic Stainless Coil
A cold-rolled Type 434 ferritic stainless steel coil with a thickness under 0.5 mm and a width of 600 mm or more. The certified chromium content is below 15% by weight, and the material contains molybdenum for enhanced corrosion resistance, making it suitable for trim and wheel covers.
7219.35.00Type 439 Cold-Rolled Stainless Coil 0.35mm
A ferritic 439 stainless steel coil with ~1% nickel, cold-reduced to 0.35 mm thickness, in coils wider than 600 mm and not further worked. It is a flat-rolled stainless steel product under tariff item 7219.35.00.