Martensitic 410S Stainless Coil
A cold-rolled martensitic Type 410S stainless steel coil, measuring less than 0.5 mm in thickness and exceeding 600 mm in width. The material is certified with a chromium content below 15% by weight and is not further worked than cold-rolled, making it suitable for cutlery blanks and valve components.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the coil is not further worked than hot-rolled
Hot-rolled stainless steel flat products of similar dimensions fall under a different heading.
If the width is less than 600 mm
Narrower cold-rolled stainless steel strip is classified in heading 7220.
If the product has been further worked beyond cold-rolling
Additional processing such as polishing or coating would move it to a different subheading.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the certificate of analysis clearly shows chromium content below 15% by weight to confirm classification under this item
• Verify the thickness is less than 0.5 mm and width exceeds 600 mm before declaring
• Keep mill test certificates available for CBSA inspection
Related Products under Tariff item 7219.35.00
17-4 PH Precipitation Hardening Stainless Sheet 0.3mm
Cold-rolled sheet of 17-4 PH martensitic precipitation hardening stainless steel, 0.3 mm thick and 600 mm or more in width, with no further working beyond cold reduction. This product meets the definition of flat-rolled stainless steel products of heading 72.19, specifically classified under tariff item 7219.35.00 for thickness less than 0.5 mm.
201 Cold-Rolled Stainless Steel Coil 0.48mm
An austenitic 201 grade stainless steel coil, cold-rolled to 0.48 mm thickness, containing 1-4% nickel and over 600 mm wide. It is a flat-rolled stainless steel product not further worked than cold-rolled, classified under tariff item 7219.35.00.
201 Stainless Steel Cold-Rolled Coil 0.41mm x 1219mm
An austenitic 201 grade cold-rolled stainless steel coil at 0.41 mm thickness and 1219 mm width, supplied in coils for construction and utensil applications. The product is not further worked than cold-rolled and falls under this tariff item for thin stainless steel flat products.
201 Stainless Steel Thin Cold-Rolled Plate 0.2mm
Austenitic 201 stainless steel cold-rolled plate at 0.2 mm thickness, width 600 mm or more, without further surface treatments. This ultra-thin product meets the criteria for flat-rolled stainless steel of heading 72.19, classified under tariff item 7219.35.00 as not further worked than cold-rolled and of a thickness less than 0.5 mm.
301 Half-Hard Cold-Rolled Stainless Coil 0.41mm
A 301 half-hard stainless steel coil with 6.5-7.5% nickel, cold-rolled to 0.41 mm thickness, in wide coils for spring applications. It is a flat-rolled stainless steel product not further worked than cold-rolled, falling under tariff item 7219.35.00.
304 Cold-Rolled Stainless Shim Stock Coil 0.2mm x 1000mm
An ultra-thin 0.2 mm 304 stainless steel cold-rolled coil used as shim stock, with a width of 1000 mm, supplied in coil form. The product is not further worked than cold-rolled and is classified under this tariff item for thin stainless steel flat products.