Other
A live specimen of the mongoose family, including Galidia, Galidictis, Mungotictis, Salanoia, Suricata, Herpestes, Helogale, Donogale, Atilax, Mungos, Crossarchus, Liberiictics, Ichneumia, Bdeogale, Rhynchogale, Cynictis, Paracynictis and Cryptoprocta, unless the Minister of Public Safety and Emergency Preparedness is satisfied, in accordance with the written advice of the Canadian Wildlife Service, that the specimen is imported for breeding, study or exhibition purposes, in confinement, by zoological institutions approved by the Canadian Wildlife Service; A live bird of the Starling family (Sturnidae), other than (a) the European Starling (Sturnus vulgaris) and the Chinese Talking or Hill Mynah (Gracula religiosa), or (b) Rothschilds or Bali Mynah (Leucopsar rothschildi) for propagation purposes; Any other non-game bird, other than (a) a domestic bird of a kind kept for food purposes, (b) a bird intended solely for exhibition in a public zoological park, or (c) a bird intended solely to be kept in confinement in a cage or to be used for purposes of public entertainment; Aigrettes, egret plumes or so-called osprey plumes and the feathers, quills, heads, wings, tails, skins, or parts of skins of wild birds, either raw or manufactured, other than (a) the feathers or plumes of ostriches, the plumage of the English pheasant, the Indian peacock, birds imported alive, or of wild birds of groups recognized as game birds in an Act of Parliament or of the legislature of a province relating to game under which an open season is provided, or (b) specimens imported, in accordance with regulations made by the Minister of Public Safety and Emergency Preparedness, for any museum or for scientific or educational purposes; Base or counterfeit coins; Used or second-hand mattresses or materials therefrom, other than (a) mattresses imported under tariff item No. 9805.00.00, 9806.00.00, 9807.00.00, 9808.00.00 or 9810.00.00, or (b) materials from used or second hand mattresses, when imported after having been cleaned and fumigated, in accordance with regulations made by the Minister of Public Safety and Emergency Preparedness, accompanied by such certificates as are designated by the Minister of Public Safety and Emergency Preparedness; Reprints of Canadian copyrighted works and reprints of British copyrighted works that have been copyrighted in Canada; Goods manufactured or produced wholly or in part by prison labour; Goods mined, manufactured or produced wholly or in part by forced labour; Smoke screen apparatus for use on motor vehicles or on vessels of Chapter 89; Used or second-hand motor vehicles of all kinds, manufactured prior to the calendar year in which importation into Canada is sought to be made, other than motor vehicles (a) imported under tariff item No. 9801.10.10, 9801.10.20, 9801.10.30, 9807.00.00, 9808.00.00 or 9810.00.00, (b) imported by a settler on the settler's first arrival but not entitled to be classified under tariff item No. 9807.00.00, (c) forfeited or confiscated for any offence under the Customs laws, or the laws of any province of Canada, (d) left by bequest, (e) imported from the United States, (f) imported from Mexico (i) in the 2009 or 2010 calendar year, if the motor vehicles are not less than ten years old, (ii) in the 2011 or 2012 calendar year, if the motor vehicles are not less than eight years old, (iii) in the 2013 or 2014 calendar year, if the motor vehicles are not less than six years old, (iv) in the 2015 or 2016 calendar year, if the motor vehicles are not less than four years old, (v) in the 2017 or 2018 calendar year, if the motor vehicles are not less than two years old, or (vi) on or after January 1, 2019; Used or second-hand aircraft of all kinds, other than aircraft (a) classified under tariff item No. 9803.00.00 or 9810.00.00, civil aircraft of heading 88.01 or 88.02, or aircraft engaged solely in international traffic, (b) forfeited or confiscated for any offence under any Act of Parliament relating to customs, the Air Regulations or an Act of the legislature of any province, (c) imported by the Department of National Defence for military purposes, or (d) imported from the United States; White phosphorus matches; Any goods, in association with which there is used any description that is false in a material respect as to the geographical origin of the goods or the importation of which is prohibited by an order made under the Trade-marks Act. > Not further worked than cold-rolled (cold-reduced): > Other
Duty Rate (from China)
Products classified under Tariff item 7219.35.00.90
17-4 PH Precipitation Hardening Stainless Sheet 0.3mm
Cold-rolled sheet of 17-4 PH precipitation-hardening stainless steel, 0.3 mm thick and at least 600 mm wide, supplied without further surface treatment. This product is a flat-rolled stainless steel article of heading 72.19, specifically of a thickness less than 0.5 mm, and is not further worked beyond cold reduction.
7219.35.00201 Stainless Steel Thin Cold-Rolled Plate 0.2mm
Austenitic 201 stainless steel cold-rolled plate, 0.2 mm thick and 600 mm or more in width, without additional surface treatments. This is a flat-rolled stainless steel product of heading 72.19, with a thickness below 0.5 mm, and is not further worked beyond cold reduction.
7219.35.00304L Low Carbon Stainless Cold-Reduced Sheet 0.35mm
Low-carbon 304L stainless steel sheet, cold-reduced to 0.35 mm thickness with a width of at least 600 mm, not subjected to further working. This is a flat-rolled stainless steel product of heading 72.19, with a thickness under 0.5 mm, and is not further worked beyond cold reduction.
7219.35.00304 Stainless Steel Cold-Rolled Sheet 0.4mm Thick
Flat-rolled 304 stainless steel sheet, cold-rolled to a thickness of 0.4 mm and width exceeding 600 mm, not further worked beyond cold reduction. This product falls under heading 72.19 as a stainless steel flat-rolled product with a thickness less than 0.5 mm.
7219.35.00310 Stainless Steel Heat-Resistant Cold Sheet 0.4mm
High-temperature 310 stainless steel cold-rolled sheet, 0.4 mm thick and 600 mm or more in width, without further treatments. This is a flat-rolled stainless steel product of heading 72.19, with a thickness below 0.5 mm, and is not further worked beyond cold reduction.
7219.35.00316L Stainless Steel Cold-Reduced Coil 0.3mm
Cold-reduced 316L stainless steel coil, 0.3 mm thick with width over 600 mm, in flat-rolled form without additional processing. This product falls under heading 72.19 as a stainless steel flat-rolled product with a thickness less than 0.5 mm, not further worked beyond cold reduction.
7219.35.00317 Stainless Steel Cold-Reduced Coil
Flat-rolled 317 grade stainless steel coil, 0.35 mm thick, 1500 mm wide, with 11-15% Ni and 3-4% Mo for superior pitting resistance. This product falls under heading 72.19 as a stainless steel flat-rolled product with a thickness less than 0.5 mm, not further worked beyond cold reduction.
7219.35.00321 Stainless Steel Stabilized Cold-Rolled Foil 0.1mm
Titanium-stabilized 321 stainless steel cold-rolled foil-like sheet at 0.1 mm thickness, width at least 600 mm, plain. This is a flat-rolled stainless steel product of heading 72.19, with a thickness below 0.5 mm, and is not further worked beyond cold reduction.
7219.35.00409 Stainless Steel Cold-Rolled Automotive Sheet 0.48mm
409 ferritic stainless steel cold-rolled sheet at 0.48 mm thickness for automotive exhaust, width over 600 mm, uncoated. This is a flat-rolled stainless steel product of heading 72.19, with a thickness below 0.5 mm, and is not further worked beyond cold reduction.
7219.35.00430 Stainless Steel Cold-Rolled Sheet 0.45mm
Ferritic 430 grade stainless steel flat-rolled sheet, cold-rolled to 0.45 mm thickness and minimum 600 mm width, not further worked. This product falls under heading 72.19 as a stainless steel flat-rolled product with a thickness less than 0.5 mm.
7219.35.00AL-6XN Alloy Cold-Rolled Stainless Coil
High-performance AL-6XN super-austenitic stainless coil, cold-rolled to 0.3 mm x 1200 mm, with 20-22% Ni and 4% Mo for extreme corrosion environments. This is a flat-rolled stainless steel product of heading 72.19, with a thickness below 0.5 mm, and is not further worked beyond cold reduction.
7219.35.00Custom 317LMN Cold-Reduced Coil
317LMN low-carbon, high-Mo stainless steel cold-rolled coil, 0.48 mm thick, 1400 mm wide, 13% Ni, 4.5% Mo for weldability in sour service. This product falls under heading 72.19 as a stainless steel flat-rolled product with a thickness less than 0.5 mm, not further worked beyond cold reduction.
7219.35.00Duplex 2205 Stainless Cold-Reduced Panel 0.45mm
Duplex 2205 stainless steel cold-reduced flat panel, 0.45 mm thickness over 600 mm width, no further working. This is a flat-rolled stainless steel product of heading 72.19, with a thickness below 0.5 mm, and is not further worked beyond cold reduction.
7219.35.00SMO 254 Cold-Rolled Stainless Steel Coil
Uranus SMO 254 super-austenitic grade cold-rolled coil, 0.25 mm thickness, 1600 mm width, 18% Ni, 4.8% Mo for urea plants. This is a flat-rolled stainless steel product of heading 72.19, with a thickness below 0.5 mm, and is not further worked beyond cold reduction.
7219.35.00Type 316H High-Carbon Stainless Coil
Elevated carbon Type 316H stainless cold-rolled coil for high-temperature service, 0.4 mm x 900 mm, 12% Ni, 2.8% Mo content. This product falls under heading 72.19 as a stainless steel flat-rolled product with a thickness less than 0.5 mm, not further worked beyond cold reduction.