Of a thickness of less than 0.5 mm
Live horses, asses, mules and hinnies. > Of a thickness of less than 0.5 mm
Duty Rate (from China)
Subheadings
Products classified under Tariff item 7219.35.00
17-4 PH Precipitation Hardening Stainless Sheet 0.3mm
Cold-rolled sheet of 17-4 PH precipitation-hardening stainless steel, 0.3 mm thick and at least 600 mm wide, supplied without further surface treatment. This product is a flat-rolled stainless steel article of heading 72.19, specifically of a thickness less than 0.5 mm, and is not further worked beyond cold reduction.
201 Stainless Steel Thin Cold-Rolled Plate 0.2mm
Austenitic 201 stainless steel cold-rolled plate, 0.2 mm thick and 600 mm or more in width, without additional surface treatments. This is a flat-rolled stainless steel product of heading 72.19, with a thickness below 0.5 mm, and is not further worked beyond cold reduction.
304L Low Carbon Stainless Cold-Reduced Sheet 0.35mm
Low-carbon 304L stainless steel sheet, cold-reduced to 0.35 mm thickness with a width of at least 600 mm, not subjected to further working. This is a flat-rolled stainless steel product of heading 72.19, with a thickness under 0.5 mm, and is not further worked beyond cold reduction.
304 Stainless Steel Cold-Rolled Sheet 0.4mm Thick
Flat-rolled 304 stainless steel sheet, cold-rolled to a thickness of 0.4 mm and width exceeding 600 mm, not further worked beyond cold reduction. This product falls under heading 72.19 as a stainless steel flat-rolled product with a thickness less than 0.5 mm.
310 Stainless Steel Heat-Resistant Cold Sheet 0.4mm
High-temperature 310 stainless steel cold-rolled sheet, 0.4 mm thick and 600 mm or more in width, without further treatments. This is a flat-rolled stainless steel product of heading 72.19, with a thickness below 0.5 mm, and is not further worked beyond cold reduction.
316L Stainless Steel Cold-Reduced Coil 0.3mm
Cold-reduced 316L stainless steel coil, 0.3 mm thick with width over 600 mm, in flat-rolled form without additional processing. This product falls under heading 72.19 as a stainless steel flat-rolled product with a thickness less than 0.5 mm, not further worked beyond cold reduction.
317 Stainless Steel Cold-Reduced Coil
Flat-rolled 317 grade stainless steel coil, 0.35 mm thick, 1500 mm wide, with 11-15% Ni and 3-4% Mo for superior pitting resistance. This product falls under heading 72.19 as a stainless steel flat-rolled product with a thickness less than 0.5 mm, not further worked beyond cold reduction.
321 Stainless Steel Stabilized Cold-Rolled Foil 0.1mm
Titanium-stabilized 321 stainless steel cold-rolled foil-like sheet at 0.1 mm thickness, width at least 600 mm, plain. This is a flat-rolled stainless steel product of heading 72.19, with a thickness below 0.5 mm, and is not further worked beyond cold reduction.
409 Stainless Steel Cold-Rolled Automotive Sheet 0.48mm
409 ferritic stainless steel cold-rolled sheet at 0.48 mm thickness for automotive exhaust, width over 600 mm, uncoated. This is a flat-rolled stainless steel product of heading 72.19, with a thickness below 0.5 mm, and is not further worked beyond cold reduction.
430 Stainless Steel Cold-Rolled Sheet 0.45mm
Ferritic 430 grade stainless steel flat-rolled sheet, cold-rolled to 0.45 mm thickness and minimum 600 mm width, not further worked. This product falls under heading 72.19 as a stainless steel flat-rolled product with a thickness less than 0.5 mm.
AL-6XN Alloy Cold-Rolled Stainless Coil
High-performance AL-6XN super-austenitic stainless coil, cold-rolled to 0.3 mm x 1200 mm, with 20-22% Ni and 4% Mo for extreme corrosion environments. This is a flat-rolled stainless steel product of heading 72.19, with a thickness below 0.5 mm, and is not further worked beyond cold reduction.
Custom 317LMN Cold-Reduced Coil
317LMN low-carbon, high-Mo stainless steel cold-rolled coil, 0.48 mm thick, 1400 mm wide, 13% Ni, 4.5% Mo for weldability in sour service. This product falls under heading 72.19 as a stainless steel flat-rolled product with a thickness less than 0.5 mm, not further worked beyond cold reduction.
Duplex 2205 Stainless Cold-Reduced Panel 0.45mm
Duplex 2205 stainless steel cold-reduced flat panel, 0.45 mm thickness over 600 mm width, no further working. This is a flat-rolled stainless steel product of heading 72.19, with a thickness below 0.5 mm, and is not further worked beyond cold reduction.
SMO 254 Cold-Rolled Stainless Steel Coil
Uranus SMO 254 super-austenitic grade cold-rolled coil, 0.25 mm thickness, 1600 mm width, 18% Ni, 4.8% Mo for urea plants. This is a flat-rolled stainless steel product of heading 72.19, with a thickness below 0.5 mm, and is not further worked beyond cold reduction.
Type 316H High-Carbon Stainless Coil
Elevated carbon Type 316H stainless cold-rolled coil for high-temperature service, 0.4 mm x 900 mm, 12% Ni, 2.8% Mo content. This product falls under heading 72.19 as a stainless steel flat-rolled product with a thickness less than 0.5 mm, not further worked beyond cold reduction.