Of a thickness exceeding 1 mm but less than 3 mm
Flat-rolled products of stainless steel, of a width of 600 mm or more. > Not further worked than cold-rolled (cold-reduced): > Of a thickness exceeding 1 mm but less than 3 mm
Duty Rate (from China)
Subheadings
Products classified under Tariff item 7219.33.00
1.4462 (329) Duplex Stainless Steel Coil
1.4462 (329) duplex stainless steel cold-rolled coil, 2.4 mm thick and 1,200 mm wide, combines austenitic and ferritic structures with 2.6% molybdenum and 1.5% nickel. As a flat-rolled product of stainless steel, not further worked than cold-rolled, with a thickness exceeding 1 mm but less than 3 mm, it is classified under tariff item 7219.33.00.
17-4PH Cold-Rolled Stainless Precipitation Sheet 1.9mm
A precipitation-hardening stainless steel sheet, cold-rolled to a thickness of 1.9 mm and a width of 750 mm. This product is not further worked beyond cold reduction, making it a flat-rolled product of stainless steel under tariff item 7219.33.00.
17-4 PH Precipitation Hardening Stainless Steel Coil
17-4 PH precipitation hardening stainless steel cold-rolled coil, 1.8 mm thick and 900 mm wide, contains 3.5% molybdenum and 4% nickel for high-strength applications. As a flat-rolled product of stainless steel, not further worked than cold-rolled, with a thickness exceeding 1 mm but less than 3 mm, it falls under tariff item 7219.33.00.
201 Cold-Rolled Stainless Steel Coil 1.8mm
An austenitic 201 stainless steel coil, cold-rolled to 1.8 mm thickness and 1500 mm width, supplied in master coils. This flat-rolled product is not further worked beyond cold reduction, qualifying for tariff item 7219.33.00.
254 SMO Cold-Rolled High-Nickel Coil
254 SMO is a super duplex high-nickel stainless steel cold-rolled coil, 2.4 mm thick and 700 mm wide. It contains high levels of nickel, chromium, and molybdenum for exceptional corrosion resistance in aggressive environments. This product is classified under tariff item 7219.33.00 as a flat-rolled stainless steel product, not further worked than cold-rolled.
254 SMO Cold-Rolled Stainless Steel Coil
254 SMO super stainless steel cold-rolled coil, 1.7 mm thick and 850 mm wide, contains 2.7% molybdenum and 18% nickel for offshore platforms. As a flat-rolled product of stainless steel, not further worked than cold-rolled, with a thickness exceeding 1 mm but less than 3 mm, it is classified under tariff item 7219.33.00.
304 Cold-Rolled Stainless Steel Sheet 2mm Thick
A flat-rolled 304 stainless steel sheet, cold-rolled to 2 mm thickness with a width exceeding 600 mm. This product is not further worked beyond cold reduction, making it eligible for tariff item 7219.33.00.
304L Cold-Rolled Stainless Steel Mill Edge Sheet 1.6mm
A low-carbon 304L stainless steel sheet, cold-rolled to 1.6 mm thickness with mill edges and 1524 mm width. This flat-rolled product is not further worked beyond cold reduction, qualifying for tariff item 7219.33.00.
310 Cold-Rolled Stainless Steel Heat-Resistant Sheet 2.8mm
A high-temperature 310 stainless steel sheet, cold-rolled to 2.8 mm thickness and 900 mm width, used for furnace parts. This flat-rolled product is not further worked beyond cold reduction, qualifying for tariff item 7219.33.00.
316L Cold-Reduced Stainless Steel Plate 1.5mm
A cold-reduced 316L stainless steel flat-rolled product, 1.5 mm thick with a width exceeding 600 mm, used in chemical processing equipment. This product is not further worked beyond cold reduction, qualifying for tariff item 7219.33.00.
321 Cold-Rolled Stainless Steel Sheet 1.2mm
A stabilized 321 stainless steel sheet, cold-rolled to 1.2 mm thickness and 1250 mm width, for high-temperature service. This flat-rolled product is not further worked beyond cold reduction, qualifying for tariff item 7219.33.00.
409 Cold-Rolled Stainless Steel Automotive Sheet 2.2mm
A ferritic 409 stainless steel sheet, cold-rolled to 2.2 mm thickness and 1200 mm width, used for exhaust components. This flat-rolled product is not further worked beyond cold reduction, qualifying for tariff item 7219.33.00.
409 Cold-Rolled Stainless Steel Coil
Type 409 is a ferritic stainless steel coil for exhaust systems, cold-rolled to a thickness of 2.2 mm and a width of 1400 mm, without further surface treatment. It contains chromium for corrosion resistance and is classified under tariff item 7219.33.00 as a flat-rolled stainless steel product, not further worked than cold-rolled.
430 Cold-Rolled Stainless Steel Coil
Type 430 is a ferritic stainless steel in wide coil form, cold-rolled to a thickness of 2 mm, not further worked. It contains 16-18% chromium for corrosion resistance and is classified under tariff item 7219.33.00 as a flat-rolled stainless steel product, not further worked than cold-rolled.
430 Cold-Rolled Stainless Steel Sheet 2.5mm Thick
A ferritic 430 grade stainless steel sheet, cold-rolled to 2.5 mm thickness and 1000 mm width, not further worked. This flat-rolled product qualifies for tariff item 7219.33.00 as a cold-reduced stainless steel product.
AISI 201 Cold-Rolled Stainless Steel Coil
AISI 201 is an austenitic stainless steel wide coil, cold-rolled to a thickness of 1.8 mm for automotive trim applications. It contains chromium, nickel, and manganese for corrosion resistance and formability. This product is classified under tariff item 7219.33.00 as a flat-rolled stainless steel product, not further worked than cold-rolled.
AISI 304 Cold-Rolled Stainless Steel Coil
AISI 304 is a wide coil of 304 stainless steel, cold-rolled to a thickness of 1.5-2.5 mm, not further worked beyond cold-reduction. It contains 18-20% chromium and 8-10.5% nickel for excellent corrosion resistance and formability. This product is classified under tariff item 7219.33.00 as a flat-rolled stainless steel product, not further worked than cold-rolled.
AISI 316L Cold-Rolled Stainless Steel Coil
AISI 316L is a cold-rolled stainless steel coil exceeding 1370 mm in width and 1-3 mm in thickness, suitable for marine applications. It contains 10-14% nickel and 2-3% molybdenum for superior corrosion resistance. This product is classified under tariff item 7219.33.00 as a flat-rolled stainless steel product, not further worked than cold-rolled.
AL-6XN Alloy Cold-Rolled Stainless Steel Coil
AL-6XN super-austenitic stainless steel cold-rolled coil, 1.5 mm thick and 1,000 mm wide, contains 2.5% molybdenum and 21% nickel for severe corrosive environments. As a flat-rolled product of stainless steel, not further worked than cold-rolled, with a thickness exceeding 1 mm but less than 3 mm, it falls under tariff item 7219.33.00.
AL-6XN Cold-Rolled High-Nickel Coil
AL-6XN is a super-austenitic high-nickel stainless coil, cold-rolled to a thickness of 2.0 mm and a width of 650 mm, in coil form. It contains high levels of nickel, chromium, and molybdenum for exceptional corrosion resistance in seawater and chemical processing applications. This product is classified under tariff item 7219.33.00 as a flat-rolled stainless steel product, not further worked than cold-rolled.
Alloy 20Cb-3 Cold-Rolled High-Nickel Coil
A cold-rolled Alloy 20Cb-3 stainless steel coil with 35% nickel, 1.8 mm thick and 1550 mm wide, for sulfuric acid handling. This flat-rolled product is not further worked beyond cold reduction, qualifying for tariff item 7219.33.00.
Alloy 20 Cold-Rolled High-Nickel Coil
Alloy 20 is a cold-rolled flat coil of Carpenter Alloy 20, with a nickel content of approximately 35%, thickness of 2.2 mm, and width of 1200 mm, in coil form without further working. It offers excellent corrosion resistance in sulfuric acid environments. This product is classified under tariff item 7219.33.00 as a flat-rolled stainless steel product, not further worked than cold-rolled.
Custom 317LMN Stainless Steel Cold-Rolled Coil
Custom 317LMN stainless steel cold-rolled coil, 2.2 mm thick and 750 mm wide, contains 2.8% molybdenum and 13.5% nickel for pulp and paper industry. As a flat-rolled product of stainless steel, not further worked than cold-rolled, with a thickness exceeding 1 mm but less than 3 mm, it is classified under tariff item 7219.33.00.
Custom 718 High-Nickel Cold Coil
Custom 718 is a high-nickel alloy steel, equivalent to Inconel 718, cold-rolled to a thickness of 1.2 mm and a width of 900 mm, in coil form, not further worked. It contains high levels of nickel, chromium, and iron for high-strength and corrosion-resistant applications. This product is classified under tariff item 7219.33.00 as a flat-rolled stainless steel product, not further worked than cold-rolled.
Duplex 2205 Cold-Rolled Stainless Steel Coil
Duplex 2205 is a duplex stainless steel cold-rolled coil with a width exceeding 1370 mm and a thickness between 1 mm and 3 mm. It contains 4.5-6.5% nickel and high chromium and molybdenum for enhanced strength and corrosion resistance. This product is classified under tariff item 7219.33.00 as a flat-rolled stainless steel product, not further worked than cold-rolled.
Duplex 2205 Cold-Rolled Stainless Steel Sheet 2.4mm
A duplex 2205 stainless steel sheet, cold-rolled to 2.4 mm thickness and 1400 mm width, with high strength for offshore platforms. This flat-rolled product is not further worked beyond cold reduction, qualifying for tariff item 7219.33.00.
Hastelloy C-276 Cold-Rolled Stainless Coil
A Hastelloy C-276 high-nickel alloy (57% nickel) cold-rolled stainless steel coil, 2.5 mm thickness and 1400 mm width, for severe corrosive environments. This flat-rolled product is not further worked beyond cold reduction, qualifying for tariff item 7219.33.00.
Hastelloy C-276 Cold-Rolled Steel Coil
Hastelloy C-276 is a high-nickel alloy steel (approximately 57% nickel) presented as a cold-rolled coil, 1.5 mm thick and 750 mm wide. It qualifies as a flat-rolled product of stainless steel, not further worked than cold-rolled, with a thickness exceeding 1 mm but less than 3 mm, falling under tariff item 7219.33.00.
Incoloy 800H Cold-Rolled Stainless Steel Coil
A wide cold-rolled coil of Incoloy 800H, a high-nickel alloy stainless steel (around 30-35% nickel), with thickness 1.5 mm and width 1500 mm. This flat-rolled product is not further worked beyond cold reduction, qualifying for tariff item 7219.33.00.
Incoloy 825 Cold-Rolled Coil
Incoloy 825 is a high-nickel alloy stainless steel (about 42% nickel) supplied as a cold-rolled coil, 2 mm thick and over 600 mm wide. As a flat-rolled product of stainless steel, not further worked than cold-rolled, with a thickness exceeding 1 mm but less than 3 mm, it is classified under tariff item 7219.33.00.
Incoloy 825 Cold-Rolled High-Nickel Steel Coil
A cold-rolled Incoloy 825 stainless steel coil, 42% nickel content, 2 mm thick and 1600 mm wide for corrosion-resistant applications. This flat-rolled product is not further worked beyond cold reduction, qualifying for tariff item 7219.33.00.
Inconel 625 Cold-Rolled Alloy Coil
Inconel 625 is a high-performance alloy steel with 58% nickel, presented as a cold-rolled coil, 2.5 mm thick and 1000 mm wide. It is a flat-rolled product of stainless steel, not further worked than cold-rolled, with a thickness exceeding 1 mm but less than 3 mm, classified under tariff item 7219.33.00.
Inconel 625 Cold-Rolled High-Nickel Alloy Coil
A premium Inconel 625 stainless coil with 58% nickel, cold-rolled 1.2 mm thick x 1520 mm wide for gas turbine components. This flat-rolled product is not further worked beyond cold reduction, qualifying for tariff item 7219.33.00.
Monel 400 Cold-Rolled Stainless Coil
Monel 400 is a high-nickel copper-nickel alloy steel coil, cold-rolled to 1.8 mm thickness and 800 mm width. As a flat-rolled product of stainless steel, not further worked than cold-rolled, with a thickness exceeding 1 mm but less than 3 mm, it falls under tariff item 7219.33.00.
Monel 400 Cold-Rolled Stainless Steel Coil
Monel 400 is a nickel-copper alloy steel coil containing approximately 67% nickel, cold-rolled to a thickness of 2.2 mm and a width of 1450 mm. It is classified under tariff item 7219.33.00 as a flat-rolled stainless steel product, not further worked than cold-rolled, with a thickness exceeding 1 mm but less than 3 mm. The high nickel content qualifies it as an alloy steel under the Customs Tariff of Canada.
Nickel 200/201 Cold-Rolled Alloy Coil
Nickel 200/201 is commercially pure nickel alloy steel, cold-rolled to 1.7 mm thickness and 1100 mm width, presented as a coil. It is a flat-rolled product of stainless steel, not further worked than cold-rolled, with a thickness exceeding 1 mm but less than 3 mm, classified under tariff item 7219.33.00.
Type 310 Cold-Rolled Stainless Steel Coil
Type 310 is a high-temperature stainless steel cold-rolled coil with a width exceeding 1370 mm and a thickness between 1 mm and 3 mm. It contains 19-22% nickel and 24-26% chromium for oxidation resistance at elevated temperatures. This product is classified under tariff item 7219.33.00 as a flat-rolled stainless steel product, not further worked than cold-rolled.
Type 316L Cold-Rolled Stainless Steel Coil
Type 316L is a cold-rolled stainless steel coil with a width exceeding 1370 mm and a thickness between 1 mm and 3 mm. It contains 10-14% nickel and 2-3% molybdenum for superior corrosion resistance, particularly in marine environments. This product is classified under tariff item 7219.33.00 as a flat-rolled stainless steel product, not further worked than cold-rolled.
Type 317 Cold-Rolled Stainless Steel Coil
Type 317 is a cold-rolled stainless steel coil with a width exceeding 1370 mm and a thickness between 1 mm and 3 mm. It contains 11-15% nickel for enhanced pitting resistance, along with molybdenum for improved corrosion resistance. This product is classified under tariff item 7219.33.00 as a flat-rolled stainless steel product, not further worked than cold-rolled.
Type 904L Cold-Rolled Stainless Steel Coil
Type 904L is a premium cold-rolled stainless steel coil with a width exceeding 1370 mm and a thickness between 1 mm and 3 mm. It is alloyed with 23-28% nickel, copper, and molybdenum for extreme corrosion resistance in aggressive environments. This product is classified under tariff item 7219.33.00 as a flat-rolled stainless steel product, not further worked than cold-rolled.