Hastelloy C-276 Cold-Rolled Steel Coil
Hastelloy C-276 is a high-nickel alloy steel (approximately 57% nickel) presented as a cold-rolled coil, 1.5 mm thick and 750 mm wide. It qualifies as a flat-rolled product of stainless steel, not further worked than cold-rolled, with a thickness exceeding 1 mm but less than 3 mm, falling under tariff item 7219.33.00.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the thickness is 4.75 mm or more
This alternative covers flat-rolled stainless steel products not further worked than cold-rolled, with a greater thickness.
If the thickness is 3 mm or more but less than 4.75 mm
This alternative applies to cold-rolled stainless steel flat products of a different thickness range.
If the thickness is less than 0.5 mm
This alternative covers thinner cold-rolled stainless steel flat products.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the coil's width exceeds 600 mm and thickness is between 1 mm and 3 mm to qualify for this tariff item
• Provide a mill test certificate with chemical composition to confirm stainless steel classification
• Verify if the product qualifies for preferential tariff treatment under a free trade agreement by declaring the origin code
Related Products under Tariff item 7219.33.00
1.4462 (329) Duplex Stainless Steel Coil
1.4462 (329) duplex stainless steel cold-rolled coil, 2.4 mm thick and 1,200 mm wide, combines austenitic and ferritic structures with 2.6% molybdenum and 1.5% nickel. As a flat-rolled product of stainless steel, not further worked than cold-rolled, with a thickness exceeding 1 mm but less than 3 mm, it is classified under tariff item 7219.33.00.
17-4PH Cold-Rolled Stainless Precipitation Sheet 1.9mm
A precipitation-hardening stainless steel sheet, cold-rolled to a thickness of 1.9 mm and a width of 750 mm. This product is not further worked beyond cold reduction, making it a flat-rolled product of stainless steel under tariff item 7219.33.00.
17-4 PH Precipitation Hardening Stainless Steel Coil
17-4 PH precipitation hardening stainless steel cold-rolled coil, 1.8 mm thick and 900 mm wide, contains 3.5% molybdenum and 4% nickel for high-strength applications. As a flat-rolled product of stainless steel, not further worked than cold-rolled, with a thickness exceeding 1 mm but less than 3 mm, it falls under tariff item 7219.33.00.
201 Cold-Rolled Stainless Steel Coil 1.8mm
An austenitic 201 stainless steel coil, cold-rolled to 1.8 mm thickness and 1500 mm width, supplied in master coils. This flat-rolled product is not further worked beyond cold reduction, qualifying for tariff item 7219.33.00.
254 SMO Cold-Rolled High-Nickel Coil
254 SMO is a super duplex high-nickel stainless steel cold-rolled coil, 2.4 mm thick and 700 mm wide. It contains high levels of nickel, chromium, and molybdenum for exceptional corrosion resistance in aggressive environments. This product is classified under tariff item 7219.33.00 as a flat-rolled stainless steel product, not further worked than cold-rolled.
254 SMO Cold-Rolled Stainless Steel Coil
254 SMO super stainless steel cold-rolled coil, 1.7 mm thick and 850 mm wide, contains 2.7% molybdenum and 18% nickel for offshore platforms. As a flat-rolled product of stainless steel, not further worked than cold-rolled, with a thickness exceeding 1 mm but less than 3 mm, it is classified under tariff item 7219.33.00.