Of a thickness of 3 mm or more but less than 4.75 mm
Flat-rolled products of stainless steel, of a width of 600 mm or more. > Not further worked than cold-rolled (cold-reduced): > Of a thickness of 3 mm or more but less than 4.75 mm
Duty Rate (from China)
Subheadings
Products classified under Tariff item 7219.32.00
17-4 PH Precipitation Hardening Stainless Coil 3.2mm
17-4 PH precipitation hardening stainless steel coil, cold-rolled to 3.2 mm thickness and 800 mm width, containing nickel and molybdenum. This flat-rolled stainless steel product is not further worked than cold-rolled, classified under tariff item 7219.32.00 for thickness 3 mm to 4.75 mm.
17-4PH Precipitation Hardening Stainless Coil 3.2mm
17-4PH precipitation hardening stainless steel coil, cold-rolled to 3.2 mm thickness with width exceeding 600 mm, containing nickel. This flat-rolled stainless steel product is not further worked than cold-rolled, classified under tariff item 7219.32.00 for thickness 3 mm to 4.75 mm.
17-4PH Precipitation Hardening Stainless Coil 3.8mm
17-4PH martensitic precipitation hardening stainless steel cold-rolled coil, 3.8 mm thick, >1370 mm wide, untreated beyond cold-reduction. This flat-rolled stainless steel product of a width exceeding 600 mm falls under tariff item 7219.32.00 as it is not further worked than cold-rolled and has a thickness of 3 mm or more but less than 4.75 mm.
17-4 PH Precipitation Hardening Stainless Sheet 3.6mm
17-4 PH precipitation hardening stainless steel sheet, cold-rolled to a thickness of 3.6 mm and a width exceeding 600 mm, not further worked. This product falls under tariff item 7219.32.00 as a flat-rolled stainless steel product of the specified thickness range, cold-reduced and not further processed.
310 Cold-Rolled Stainless Steel Sheet 4.2mm Thick
Type 310 cold-rolled stainless steel sheet, 4.2 mm thick and over 600 mm wide, not further worked. This is a flat-rolled stainless product within the 3 mm to 4.75 mm thickness range, cold-reduced and not further processed, matching tariff item 7219.32.00.
310S Heat-Resistant Nickel Stainless Coil
Type 310S high-temperature stainless steel cold-rolled coil with 19-22% nickel content, 3.9 mm thick, 1420 mm wide, in coil form without additional processing. This product is a flat-rolled stainless steel item within the specified thickness range, cold-reduced and not further processed, fitting tariff item 7219.32.00.
316Ti Stabilized Stainless Cold Coil 4.4mm Thick
Titanium-stabilized 316Ti stainless steel cold-rolled coil, 4.4 mm thickness, width >1370 mm, minimal surface working only. This flat-rolled stainless steel product of a width exceeding 600 mm falls under tariff item 7219.32.00 as it is not further worked than cold-rolled and has a thickness of 3 mm or more but less than 4.75 mm.
316Ti Stabilized Stainless Cold-Rolled Coil 3.25mm
316Ti stabilized stainless steel coil, cold-rolled to 3.25 mm thickness with width exceeding 600 mm, containing titanium for stabilization. This flat-rolled stainless steel product is not further worked than cold-rolled, classified under tariff item 7219.32.00 for thickness 3 mm to 4.75 mm.
317L High-Nickel Stainless Steel Cold-Reduced Coil
Cold-reduced 317L stainless steel coil with 11-14% nickel content, 3.8 mm thick, and 1524 mm width, supplied in coil form without further surface treatments. This flat-rolled stainless steel product of a width exceeding 600 mm falls under tariff item 7219.32.00 as it is not further worked than cold-rolled and has a thickness of 3 mm or more but less than 4.75 mm.
321 Stabilized Nickel Stainless Steel Cold Coil
Austenitic Type 321 stainless steel coil containing 9-12% nickel, cold-rolled to 3.2 mm thickness with 1550 mm width, not further worked. This flat-rolled stainless steel product of a width exceeding 600 mm falls under tariff item 7219.32.00 as it is not further worked than cold-rolled and has a thickness of 3 mm or more but less than 4.75 mm.
409 Cold-Rolled Automotive Stainless Steel Coil 3.7mm
Grade 409 ferritic stainless coil for exhaust systems, cold-rolled to 3.7 mm, width >1370 mm, not further worked. This flat-rolled stainless steel product of a width exceeding 600 mm falls under tariff item 7219.32.00 as it is not further worked than cold-rolled and has a thickness of 3 mm or more but less than 4.75 mm.
409 Cold-Rolled Stainless Steel Sheet 3.9mm Thick
Type 409 ferritic stainless steel sheet, cold-rolled to 3.9 mm thickness and width of 600 mm or more, not further worked. This product is a flat-rolled stainless steel item within the specified thickness range, cold-reduced and not further processed, fitting tariff item 7219.32.00.
430 Cold-Rolled Stainless Steel Sheet 3.2mm Thick
Type 430 ferritic stainless steel sheet, cold-rolled to 3.2 mm thickness and minimum 600 mm width, without further processing. This flat-rolled stainless product falls under tariff item 7219.32.00 as it is cold-reduced and within the 3 mm to 4.75 mm thickness range.
430 Ferritic Cold-Rolled Stainless Steel Coil 3.2mm
Ferritic grade 430 stainless steel flat-rolled coil, cold-rolled to 3.2 mm thick and over 1370 mm wide, without patterns, enameling, or other surface finishes. This flat-rolled stainless steel product of a width exceeding 600 mm falls under tariff item 7219.32.00 as it is not further worked than cold-rolled and has a thickness of 3 mm or more but less than 4.75 mm.
904L Molybdenum-Bearing Stainless Coil 4.2mm
904L molybdenum-bearing stainless steel coil, cold-rolled to 4.2 mm thickness and over 700 mm width, containing high nickel and molybdenum for urea production. This flat-rolled stainless steel product is not further worked than cold-rolled, classified under tariff item 7219.32.00 for thickness 3 mm to 4.75 mm.
AISI 304 Cold-Rolled Mill Edge Coil 3.9mm Thick
Mill edge AISI 304 stainless steel coil with natural edges, cold-rolled 3.9 mm thick, >1370 mm wide, no slitting or edge conditioning. This flat-rolled stainless steel product of a width exceeding 600 mm falls under tariff item 7219.32.00 as it is not further worked than cold-rolled and has a thickness of 3 mm or more but less than 4.75 mm.
AISI 304 Cold-Rolled Stainless Steel Coil 3.5mm Thick
A flat-rolled coil of AISI 304 austenitic stainless steel, cold-rolled to a thickness of 3.5 mm and width exceeding 1370 mm, not subjected to any further surface treatments beyond cold-rolling. This flat-rolled stainless steel product of a width exceeding 600 mm falls under tariff item 7219.32.00 as it is not further worked than cold-rolled and has a thickness of 3 mm or more but less than 4.75 mm.
AISI 310 Cold-Rolled Heat-Resistant Stainless Coil 4.2mm
High-temperature AISI 310 stainless steel flat coil, cold-rolled 4.2 mm thick, >1370 mm wide, excluding further treatments. This flat-rolled stainless steel product of a width exceeding 600 mm falls under tariff item 7219.32.00 as it is not further worked than cold-rolled and has a thickness of 3 mm or more but less than 4.75 mm.
AISI 316L Cold-Reduced Stainless Steel Coil 4mm Thick
AISI 316L low-carbon stainless steel coil, cold-reduced to 4 mm thickness with width over 1370 mm, free of additional coatings, polishing, or chemical treatments. This flat-rolled stainless steel product of a width exceeding 600 mm falls under tariff item 7219.32.00 as it is not further worked than cold-rolled and has a thickness of 3 mm or more but less than 4.75 mm.
AISI 321 Cold-Rolled Stainless Coil 4.5mm Thick
Titanium-stabilized AISI 321 austenitic stainless steel coil, cold-rolled to 4.5 mm thickness, width >1370 mm, not further worked. This flat-rolled stainless steel product of a width exceeding 600 mm falls under tariff item 7219.32.00 as it is not further worked than cold-rolled and has a thickness of 3 mm or more but less than 4.75 mm.
AL-6XN Alloy Cold-Rolled Stainless Coil 4mm
AL-6XN super austenitic stainless steel coil, cold-rolled to 4 mm thickness and 650 mm width, with high molybdenum and nickel for corrosive environments. This flat-rolled stainless steel product is not further worked than cold-rolled, classified under tariff item 7219.32.00 for thickness 3 mm to 4.75 mm.
Alloy 20Cb-3 Cold-Rolled Coil
Alloy 20Cb-3 (Alloy 20) stainless steel coil, cold-rolled to 3.2 mm thickness and 1380 mm width, not further worked. This product is a flat-rolled stainless steel item within the specified thickness range, cold-reduced and not further processed, fitting tariff item 7219.32.00.
Alloy 20 Cold-Rolled Stainless Coil
Cold-rolled Alloy 20 (UNS N08020) stainless steel coil, 3.8 mm thick, 1200 mm wide, containing 32-38% nickel for sulfuric acid resistance. This flat-rolled stainless steel product of a width exceeding 600 mm falls under tariff item 7219.32.00 as it is not further worked than cold-rolled and has a thickness of 3 mm or more but less than 4.75 mm.
Custom 254 SMO Cold-Rolled Coil 3.8mm
254 SMO super austenitic stainless steel coil, cold-reduced to 3.8 mm thickness and 900 mm width, with high molybdenum and nickel content. This flat-rolled stainless steel product is not further worked than cold-rolled, classified under tariff item 7219.32.00 for thickness 3 mm to 4.75 mm.
Custom 825 High-Nickel Coil
Custom 825 equivalent high-nickel stainless steel cold-rolled coil, 3.6 mm thick and 1450 mm wide, for heat exchanger fabrication. This product is a flat-rolled stainless steel item within the specified thickness range, cold-reduced and not further processed, fitting tariff item 7219.32.00.
Duplex 2205 Cold-Rolled Stainless Steel Coil 3.25mm
Duplex 2205 (UNS S31803) stainless steel coil cold-rolled to 3.25 mm, width exceeding 1370 mm, no additional working. This flat-rolled stainless steel product of a width exceeding 600 mm falls under tariff item 7219.32.00 as it is not further worked than cold-rolled and has a thickness of 3 mm or more but less than 4.75 mm.
Duplex 2205 Cold-Rolled Stainless Steel Sheet 3.8mm
Duplex 2205 stainless steel sheet, cold-rolled to 3.8 mm thickness with width of 600 mm or more, not subjected to further working. This product is a flat-rolled stainless steel item within the specified thickness range, cold-reduced and not further processed, matching tariff item 7219.32.00.
Hastelloy C-276 Cold-Rolled Coil
Hastelloy C-276 nickel-molybdenum-chromium alloy steel coil, cold-rolled to 4.2 mm thickness and 1400 mm width, containing 57% nickel. This product is a flat-rolled stainless steel item within the specified thickness range, cold-reduced and not further processed, fitting tariff item 7219.32.00.
Incoloy 825 Cold-Rolled Coil
Incoloy 825 stainless steel coil, high-nickel alloy with over 38% nickel, cold-rolled to 3.5 mm thickness and 1500 mm width. This product is a flat-rolled stainless steel item within the specified thickness range, cold-reduced and not further processed, fitting tariff item 7219.32.00.
Inconel 625 Cold-Rolled Coil
Inconel 625 superalloy coil, cold-rolled to 3.6 mm thickness and 1400 mm width, containing 58% nickel. This flat-rolled stainless steel product is not further worked than cold-rolled, falling under tariff item 7219.32.00 for stainless steel sheets of 3 mm to 4.75 mm thickness.
Inconel 625 Cold-Rolled Steel Coil
Inconel 625 superalloy stainless steel coil with 58% nickel content, cold-reduced to 3.8 mm thickness and 1600 mm width in coil form. This product is a flat-rolled stainless steel item within the specified thickness range, cold-reduced and not further processed, fitting tariff item 7219.32.00.
Monel 400 Cold-Rolled Coil
Monel 400 high-nickel alloy coil, cold-rolled to 3.4 mm thickness in 1000 mm wide coils, containing 67% nickel. This flat-rolled stainless steel product is not further worked than cold-rolled, classified under tariff item 7219.32.00 for thickness 3 mm to 4.75 mm.
Monel 400 Cold-Rolled Stainless Coil
Monel 400 nickel-copper alloy steel coil (67% nickel), cold-rolled to 4.0 mm thickness and 1520 mm width for marine/chemical applications. This product is a flat-rolled stainless steel item within the specified thickness range, cold-reduced and not further processed, fitting tariff item 7219.32.00.
Ni-Span C Cold-Rolled Alloy Coil
Ni-Span C precision alloy coil, cold-rolled to 3.9 mm thickness, used for temperature-stable springs. This high-nickel stainless steel flat product is not further worked than cold-rolled, classified under tariff item 7219.32.00 for thickness 3 mm to 4.75 mm.
Type 304 Cold-Rolled Stainless Steel Sheet 3.5mm Thick
Type 304 cold-rolled stainless steel sheet, 3.5 mm thick and width exceeding 600 mm, not further worked beyond cold-reduction. This flat-rolled stainless product falls under tariff item 7219.32.00 as it is cold-reduced and within the 3 mm to 4.75 mm thickness range.
Type 304L Nickel-Bearing Stainless Steel Cold-Rolled Coil
Flat-rolled stainless steel coil of Type 304L grade, containing approximately 10-12% nickel by weight, cold-rolled to a thickness of 3.5 mm and width exceeding 1370 mm. This product is not further worked beyond cold-rolling, and falls under tariff item 7219.32.00 as it is a flat-rolled stainless steel product of a width exceeding 600 mm, not further worked than cold-rolled, with a thickness of 3 mm or more but less than 4.75 mm.
Type 316L Cold-Rolled Stainless Steel Plate 4mm Thick
Type 316L cold-reduced stainless steel plate, 4 mm thick with width over 600 mm, supplied in not further worked condition. This product is a flat-rolled stainless steel item within the specified thickness range, cold-reduced and not further processed, fitting tariff item 7219.32.00.
Type 316L Stainless Steel Cold-Rolled Coil 3.5mm
Type 316L stainless steel coil, cold-rolled to 3.5 mm thickness and 700 mm width, containing nickel and molybdenum for enhanced corrosion resistance. This flat-rolled stainless steel product is not further worked than cold-rolled, classified under tariff item 7219.32.00 for thickness 3 mm to 4.75 mm.
Type 316Ti Nickel-Stabilized Stainless Steel Coil
Type 316Ti stainless steel flat-rolled coil with 10-14% nickel and titanium stabilization, cold-rolled to 4.2 mm thickness and 1400 mm width. This product is not further worked beyond cold-rolling and falls under tariff item 7219.32.00 as a flat-rolled stainless steel product of a width exceeding 600 mm, not further worked than cold-rolled, with a thickness of 3 mm or more but less than 4.75 mm.
Type 321 Cold-Rolled Stainless Steel Plate 3.4mm
Type 321 titanium-stabilized stainless steel plate, cold-rolled to 3.4 mm thickness and 600+ mm width, not further worked. This flat-rolled stainless product falls under tariff item 7219.32.00 as it is cold-reduced and within the 3 mm to 4.75 mm thickness range.