Hastelloy C-276 Cold-Rolled Coil
This is a flat-rolled product of Hastelloy C-276 nickel-molybdenum-chromium alloy steel, cold-rolled to a thickness of 4.2 mm and a width of 1400 mm. It has not been further worked beyond cold reduction, and its thickness falls within the range of 3 mm to less than 4.75 mm, making it classifiable under this tariff item.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the thickness is less than 3 mm
This sibling item covers cold-rolled stainless steel flat products of a different thickness range.
If the thickness is 4.75 mm or more
This sibling item applies to thicker stainless steel flat-rolled products.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Verify the product is not further worked beyond cold rolling
• Confirm the width and thickness specifications
• Provide a mill test certificate to confirm the nickel-molybdenum-chromium composition
Related Products under Tariff item 7219.32.00
17-4 PH Precipitation Hardening Stainless Sheet 3.6mm
This is a flat-rolled product of precipitation-hardening stainless steel, cold-rolled to a thickness of 3.6 mm and a width exceeding 600 mm. It has not been further worked beyond cold reduction, and its thickness falls within the range of 3 mm to less than 4.75 mm, making it classifiable under this tariff item.
310 Cold-Rolled Stainless Steel Sheet 4.2mm Thick
This is a flat-rolled product of Type 310 stainless steel, cold-rolled to a thickness of 4.2 mm and a width exceeding 600 mm. It has not been further worked beyond cold reduction, and its thickness falls within the range of 3 mm to less than 4.75 mm, making it classifiable under this tariff item.
310S Heat-Resistant Nickel Stainless Coil
This is a flat-rolled product of Type 310S stainless steel, cold-rolled to a thickness of 3.9 mm and a width of 1420 mm. It has not been further worked beyond cold reduction, and its thickness falls within the range of 3 mm to less than 4.75 mm, making it classifiable under this tariff item.
409 Cold-Rolled Stainless Steel Sheet 3.9mm Thick
This is a flat-rolled product of ferritic stainless steel Type 409, cold-rolled to a thickness of 3.9 mm and a width of 600 mm or more. It has not been further worked beyond cold reduction, and its thickness falls within the range of 3 mm to less than 4.75 mm, making it classifiable under this tariff item.
430 Cold-Rolled Stainless Steel Sheet 3.2mm Thick
This is a flat-rolled product of ferritic stainless steel Type 430, cold-rolled to a thickness of 3.2 mm and a width of at least 600 mm. It has not been further worked beyond cold reduction, and its thickness falls within the range of 3 mm to less than 4.75 mm, making it classifiable under this tariff item.
Alloy 20Cb-3 Cold-Rolled Coil
This is a flat-rolled product of Alloy 20Cb-3 stainless steel, cold-rolled to a thickness of 3.2 mm and a width of 1380 mm. It has not been further worked beyond cold reduction, and its thickness falls within the range of 3 mm to less than 4.75 mm, making it classifiable under this tariff item.