Incoloy 825 Cold-Rolled Coil
Incoloy 825 is a high-nickel alloy stainless steel (about 42% nickel) supplied as a cold-rolled coil, 2 mm thick and over 600 mm wide. As a flat-rolled product of stainless steel, not further worked than cold-rolled, with a thickness exceeding 1 mm but less than 3 mm, it is classified under tariff item 7219.33.00.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the thickness is 3 mm or more but less than 4.75 mm
This alternative covers cold-rolled stainless steel flat products of a greater thickness.
If the thickness is less than 0.5 mm
This alternative applies to thinner cold-rolled stainless steel flat products.
If the width is less than 600 mm
This alternative covers cold-rolled stainless steel flat products of narrower width.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the nickel content exceeds 10.5% and chromium content is at least 10.5% to meet the stainless steel definition
• Keep commercial invoices and packing lists detailing dimensions and alloy grade for CBSA inspection
• Check for anti-dumping or countervailing duties that may apply to stainless steel products from certain countries
Related Products under Tariff item 7219.33.00
1.4462 (329) Duplex Stainless Steel Coil
1.4462 (329) duplex stainless steel cold-rolled coil, 2.4 mm thick and 1,200 mm wide, combines austenitic and ferritic structures with 2.6% molybdenum and 1.5% nickel. As a flat-rolled product of stainless steel, not further worked than cold-rolled, with a thickness exceeding 1 mm but less than 3 mm, it is classified under tariff item 7219.33.00.
17-4PH Cold-Rolled Stainless Precipitation Sheet 1.9mm
A precipitation-hardening stainless steel sheet, cold-rolled to a thickness of 1.9 mm and a width of 750 mm. This product is not further worked beyond cold reduction, making it a flat-rolled product of stainless steel under tariff item 7219.33.00.
17-4 PH Precipitation Hardening Stainless Steel Coil
17-4 PH precipitation hardening stainless steel cold-rolled coil, 1.8 mm thick and 900 mm wide, contains 3.5% molybdenum and 4% nickel for high-strength applications. As a flat-rolled product of stainless steel, not further worked than cold-rolled, with a thickness exceeding 1 mm but less than 3 mm, it falls under tariff item 7219.33.00.
201 Cold-Rolled Stainless Steel Coil 1.8mm
An austenitic 201 stainless steel coil, cold-rolled to 1.8 mm thickness and 1500 mm width, supplied in master coils. This flat-rolled product is not further worked beyond cold reduction, qualifying for tariff item 7219.33.00.
254 SMO Cold-Rolled High-Nickel Coil
254 SMO is a super duplex high-nickel stainless steel cold-rolled coil, 2.4 mm thick and 700 mm wide. It contains high levels of nickel, chromium, and molybdenum for exceptional corrosion resistance in aggressive environments. This product is classified under tariff item 7219.33.00 as a flat-rolled stainless steel product, not further worked than cold-rolled.
254 SMO Cold-Rolled Stainless Steel Coil
254 SMO super stainless steel cold-rolled coil, 1.7 mm thick and 850 mm wide, contains 2.7% molybdenum and 18% nickel for offshore platforms. As a flat-rolled product of stainless steel, not further worked than cold-rolled, with a thickness exceeding 1 mm but less than 3 mm, it is classified under tariff item 7219.33.00.