Type 904L Cold-Rolled Stainless Steel Coil
Type 904L is a premium cold-rolled stainless steel coil with a width exceeding 1370 mm and a thickness between 1 mm and 3 mm. It is alloyed with 23-28% nickel, copper, and molybdenum for extreme corrosion resistance in aggressive environments. This product is classified under tariff item 7219.33.00 as a flat-rolled stainless steel product, not further worked than cold-rolled.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the thickness is 3 mm or more
Flat-rolled stainless steel products with a thickness of 3 mm or more are classified under a different subheading.
If the thickness is less than 1 mm
Thinner cold-rolled stainless steel products fall under a different subheading.
If the product is primarily a nickel alloy
With 23-28% nickel, the product may be classified as a nickel alloy under Chapter 75 if it does not meet the stainless steel definition.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Verify the high nickel content (23-28%) and presence of copper and molybdenum to confirm the 904L grade
• Ensure the product is not further worked than cold-rolled and meets the width and thickness requirements
• Provide a mill test certificate to support the classification
Related Products under Tariff item 7219.33.00
1.4462 (329) Duplex Stainless Steel Coil
1.4462 (329) duplex stainless steel cold-rolled coil, 2.4 mm thick and 1,200 mm wide, combines austenitic and ferritic structures with 2.6% molybdenum and 1.5% nickel. As a flat-rolled product of stainless steel, not further worked than cold-rolled, with a thickness exceeding 1 mm but less than 3 mm, it is classified under tariff item 7219.33.00.
17-4PH Cold-Rolled Stainless Precipitation Sheet 1.9mm
A precipitation-hardening stainless steel sheet, cold-rolled to a thickness of 1.9 mm and a width of 750 mm. This product is not further worked beyond cold reduction, making it a flat-rolled product of stainless steel under tariff item 7219.33.00.
17-4 PH Precipitation Hardening Stainless Steel Coil
17-4 PH precipitation hardening stainless steel cold-rolled coil, 1.8 mm thick and 900 mm wide, contains 3.5% molybdenum and 4% nickel for high-strength applications. As a flat-rolled product of stainless steel, not further worked than cold-rolled, with a thickness exceeding 1 mm but less than 3 mm, it falls under tariff item 7219.33.00.
201 Cold-Rolled Stainless Steel Coil 1.8mm
An austenitic 201 stainless steel coil, cold-rolled to 1.8 mm thickness and 1500 mm width, supplied in master coils. This flat-rolled product is not further worked beyond cold reduction, qualifying for tariff item 7219.33.00.
254 SMO Cold-Rolled High-Nickel Coil
254 SMO is a super duplex high-nickel stainless steel cold-rolled coil, 2.4 mm thick and 700 mm wide. It contains high levels of nickel, chromium, and molybdenum for exceptional corrosion resistance in aggressive environments. This product is classified under tariff item 7219.33.00 as a flat-rolled stainless steel product, not further worked than cold-rolled.
254 SMO Cold-Rolled Stainless Steel Coil
254 SMO super stainless steel cold-rolled coil, 1.7 mm thick and 850 mm wide, contains 2.7% molybdenum and 18% nickel for offshore platforms. As a flat-rolled product of stainless steel, not further worked than cold-rolled, with a thickness exceeding 1 mm but less than 3 mm, it is classified under tariff item 7219.33.00.